Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Hi mate, I don't have the board any more, but if I didn't, I'd take a risk and replace with same value as the one above it.
-
Thanks for your help, I had used 14.5.45.1763_CON_V_A_PRD_EXTR which gave me the error, I'll keep in mind to use same version next time. Thank you
Leave a comment:
-
BIOS Request: Razer rc09-03304e42
This one boots no post.
Serial: BY2032A98801257
I've tried cleaning ME Region, failed ;(
Used this guide: [url]https://winraid.level1techs.com/t/guide-clean-dumped-intel-engine-cs-me-cs-txe-regions-with-data-initialization/31277/2[/url]
At section, I couldn't find this field:
At "SMIP Signing Key" field, input the placeholder RSA Private Key (dummy.pem) that was created by the OpenSSL tool. Then go to "Build > Build Settings", input the Manifest Extension Utility (MEU) executable location at "Intel(R) Manifest Extension Utility...
-
It is still the same fault, I'll leave it as potentially a CPU or GPU fault. Thank you again
Leave a comment:
-
Thank you, I'll try it out tomorrow, this will help at least rule out the BIOS.
For those interested, you can see the unreleased videos here:
Part 1 [url]https://youtu.be/pwZjTc39MiQ[/url]
Part 2 [url]https://youtu.be/7n7lREqzjds[/url]
Crazy laptop, tough one. On another forum on this site, the user had given up on similar issue. Let's see how it goes.https://Thank you, I'll try it out t...jTc39MiQ[/url]
Leave a comment:
-
Razer RZ09-0369AE22 - da560_mb mp v4.0
Hi team,
Could someone provide a BIOS for this motherboard da560_mb mp v4.0
Original fault is it will not turn on. All main power rails present when battery is in, except RAM, CPU & GPU and Integrated GPU, just can't get it to turn on. It charges battery fine, I can't see any data pin activity on the BIOS pins, however it does get power on BIOS pins. Thank you. Attached is the 128mb chip. Serial of laptop is BY2120M18700368...
-
I've realised my mistake, my original chip was [B]CYPD6228 not CYPD6227[/B]. Damn. I'll get new chip and try again. Sorry to have wasted all of your time team. Thank you.​I've realised my mistake, my original chip was [B]CYPD6228 not CYPD6227[/B]. Damn. I'll get new chip and try again. Sorry to have wasted all of your time team. Thank you.​I've realised my mistake, my original chip was [B]CYPD6228 not CYPD6227[/B]. Damn. I'll get new chip and try again. Sorry to have wasted all of your time team. Thank you.​
Leave a comment:
-
I've realised my mistake, my original chip was [B]CYPD6228 not CYPD6227[/B]. Damn. I'll get new chip and try again. Sorry to have wasted all of your time team. Thank you.I've realised my mistake, my original chip was [B]CYPD6228 not CYPD6227[/B]. Damn. I'll get new chip and try again. Sorry to have wasted all of your time team. Thank you.I've realised my mistake, my original chip was [B]CYPD6228 not CYPD6227[/B]. Damn. I'll get new chip and try again. Sorry to have wasted all of your time team. Thank you.
Leave a comment:
-
Hi mate, it's the same result with these 2 test1/2 zip files. As mentioned before the same PD firmware update happens without this chip installed meaning most likely it's actually programing the PD chip that I've replaced. Looking at the sellers description and title shows that this is a programmable chip.
[url]https://s.click.aliexpress.com/e/_DeNsf89[/url] - "[B]CYPD6227-96BZXI FLASH(64kB)ROM(96KB)"[/B]
I believe this is the issue.https://Hi mate, it's the same resul...hout this chip
Leave a comment:
-
Pictures attached.
I've tried this, the behaviour is same as original fault. After programming, with a full battery only, no charger connected, turned on, Samsung logo flashed 3 times over 2 minutes or so eventually turned on as usual, the same behaviour persists, starts into PD firmware update on a loop....
Leave a comment:
-
This is the result, [url]https://www.youtube.com/watch?v=bjXgEoP91As[/url]
It does not pass POST. It's boot looping. The Charger LED actually has a diagnostic LEDs which is pretty cool, too bad it's documentation not available. But in this case, obviously BIOS is not compatible most likely.https://This is the result, [url]htt...ompatible most
Leave a comment:
-
Thanks for sharing. What are these 2 files for in your zip file?
amiflashefi.nsh
AfuEfix64.efi (maybe for 25q80dvnjg chip? Not sure).
Thanks again for sharing.
Ahh, after seeing this, [URL]https://pdfcoffee.com/how-to-update-bios-for-win8-pdf-free.html[/URL], the AfuEfix64.efi is a command line software run in uefi shell. How do you get into uefi shell.https://Thanks for sharing. What are...r seeing this,
Leave a comment:
-
Following the guide on [url]https://www.badcaps.net/forum/troubleshooting-hardware-devices-and-electronics-theory/troubleshooting-laptops-tablets-and-mobile-devices/bios-requests-only/78569-id-samsung-bios-from-dump-and-download-the-official-update?t=88206[/url] here is the extracted BIOS.https://Following the guide on [url]...xtracted BIOS.Following the guide...
Leave a comment:
-
Hi mate, thanks for your reply. I've uploaded as requested below: [url]https://www.badcaps.net/forum/troubleshooting-hardware-devices-and-electronics-theory/troubleshooting-laptops-tablets-and-mobile-devices/bios-requests-only/3176974-np930xed-samsung-galaxy-book2-pro-laptop-firmware-fix-request[/url]
I'll take a look at that link shortly as well.https://Hi mate, thanks for your rep...-request[/url]
Leave a comment:
-
NP930XED Samsung Galaxy Book2 Pro Laptop Firmware Fix request
Hi all,
As per original post here:
[url]https://www.badcaps.net/forum/troubleshooting-hardware-devices-and-electronics-theory/troubleshooting-laptops-tablets-and-mobile-devices/3176437-np930xed-samsung-galaxy-book2-pro-laptop-pd-firmware-loop[/url]
Attached are 2 chip dumps. I've removed windows serial from BIOS file. Please let me know if there is anything I can try?
Device serial/model details:
R11HFT4300147 11297 BA92-23239B 04 02 DAP-3A DAP201501 VENUS2-13 ADL NPC M0U901T4600100https://Hi all,<br /> <br /> As per ...are-loop[/url]...
-
NP930XED Samsung Galaxy Book2 Pro Laptop PD Firmware Loop
Hello,
I hope this message finds you well. I wanted to share a recent experience I had with a laptop that had a Type-C Port issue, specifically related to a PD (Power Delivery) controller problem. After replacing the damaged PD controller chip with a new one I purchased from AliExpress, the laptop now charges properly and negotiates power as expected, allowing the device to power up. I've replaced this chip twice just in case.
However, it seems that the laptop's BIOS is detecting an older version of the PD Firmware on the newly installed chip. As a result, it attempts...
No activity results to display
Show More
Leave a comment: