Un50mu6070 Mainboard issue

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • petersor
    Member
    • Feb 2020
    • 43
    • United States

    #141
    Reflowed the crystals and processor . . . no change. Maybe one of the boost or buck converters? They appear to be proprietary Samsung ICs so not much else to do at this point, I think. I suppose I could try reflowing those - especially IC401 / VLS1R0A. Voltages are wrong around that one . . . maybe I have a board with that IC on it. to try swapping it out.

    Click image for larger version

Name:	Neg Boost Buck Converter.jpg
Views:	71
Size:	72.0 KB
ID:	3577095
    Attached Files

    Comment

    • petersor
      Member
      • Feb 2020
      • 43
      • United States

      #142
      lotas - any thoughts on this? Anything else to look at before I scrap it?

      Comment

      • lotas
        Badcaps Legend
        • Jan 2016
        • 4459
        • Russia

        #143
        Oh, I don’t even know, I don’t have the firmware for your panel (T-CON 25Q80) to compare. The problem may be in the eMMC, or perhaps in the processor itself...

        Comment

        • petersor
          Member
          • Feb 2020
          • 43
          • United States

          #144
          Thanks anyway. It was a good learning exercise and I appreciate all your help. Guess this one is destined for the landfill.

          Comment

          • lotas
            Badcaps Legend
            • Jan 2016
            • 4459
            • Russia

            #145

            Try reading the firmware from eeprom 24c512 and posting it.​

            Comment

            • petersor
              Member
              • Feb 2020
              • 43
              • United States

              #146
              Here's the data from the 24C512 eeprom . . .
              Attached Files

              Comment

              • petersor
                Member
                • Feb 2020
                • 43
                • United States

                #147
                lotas were you able to find anything in the 24C512 dump?

                Comment

                • lotas
                  Badcaps Legend
                  • Jan 2016
                  • 4459
                  • Russia

                  #148
                  Not yet, I haven't had time yet, I'll try to look tomorrow.
                  For now, try these two dumps for 25q80 and 24c512 for diagnostics.

                  Status register for 25Q80 (0x98.0x02).
                  Attached Files
                  Last edited by lotas; 02-27-2025, 05:47 PM.

                  Comment

                  • petersor
                    Member
                    • Feb 2020
                    • 43
                    • United States

                    #149
                    Thanks. I'll give them a try when I get back home . . . travelling this weekend.

                    Comment

                    • lotas
                      Badcaps Legend
                      • Jan 2016
                      • 4459
                      • Russia

                      #150
                      Ok!

                      Comment

                      • petersor
                        Member
                        • Feb 2020
                        • 43
                        • United States

                        #151
                        Updated the firmware on the 24C512 with your file and it's still not working. I'll try the 25Q80 file at some point, but I'm going to shelf this project for now. I started restoring a Pioneer SX-1010 recently and I want to spend time on that. Thanks again for your help. I'll revisit this post when I pick this project back up.

                        Comment

                        • Alex Corps
                          Member
                          • Mar 2025
                          • 25
                          • France

                          #152
                          Hi, when I want to write the status registers I don't have the same thing at all as in your image.Click image for larger version

Name:	SREG.png
Views:	12
Size:	34.1 KB
ID:	3595995
                          Attached Files

                          Comment

                          Related Topics

                          Collapse

                          • Soulzink
                            Samsug washing machine. Power supply DC41-00189a board issue
                            by Soulzink
                            Hi everyone,

                            I am trying to fix a samsung washinmachine power supply main board.
                            I already replaced it with another one to fix the machine but i want to try understand the issue with the old board.
                            Therefore i hope to be able to get some help to explain what to check in order to troubleshoot.
                            The power supply board reference is the following: DC41-00189a
                            I have followed one thread (https://www.badcaps.net/forum/troubl...ingmachine-rel...
                            04-19-2025, 06:26 AM
                          • Tynan Dill
                            Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                            by Tynan Dill
                            I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                            Upon bringing it home and plugging it up, it showed a standby light.

                            I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                            The screen seems to blackout and stay black, but with a flashlight I can see the display.

                            With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                            Assuming...
                            11-22-2024, 01:46 PM
                          • eclectric
                            Sony Bravia KDL-70W850B T-CON board / software update issue
                            by eclectric
                            Hi, I'm hoping someone can help me with this issue before I give up on this TV.

                            In short, I replaced the T-CON board due to an error code indicating that was the problem, after which it flashed a green and orange LED meaning software update required. I cannot get the tv to do the required update via USB, so I am stuck.

                            Here is a rundown of the symptoms and the steps I have taken to troubleshoot:

                            I inherited the TV with the symptom that it would turn on, then turn off after 5-10 seconds and a red LED flashed 4 or 5 times. Sometimes it would be 4, sometimes...
                            05-23-2022, 01:25 AM
                          • corrize
                            Nikon D5 – dead, power board issue ?
                            by corrize
                            Hello, the DSLR has heavyly fallen. It is dead : no sign of life and display nothing.

                            When it worked, it always displayed a card present state on LCD display, even when the battery is empty it display a empty battery symbol.
                            I found a dead fuse, I replaced it and a mosfet burnt, I changed it and another fuse burned. Nothing burned after. And I can't find any short circuit anywhere, it's weird.

                            Now, I try to understand how it works.

                            There is two boards (the little one on pictures has no component) : the first is a « power board » : managing...
                            04-03-2023, 09:13 AM
                          • damndenis
                            ASUS VG32UQA1A t-con board issue
                            by damndenis
                            Hello everybody,

                            This is my first post here, I've always loved to tinker with electronics, but never got in-depth with it. Hope I can learn a thing or two from this forum.

                            I've got a 31.5" Asus monitor which distorts/flickers at equal intervals of a couple of seconds. From what I've gathered, it's an issue with the T-CON board, but feel free to correct me. Shipping from the manufacturer would cost 3x as much as the part itself. I was wondering, if there is a way to diagnose the board itself and replace the faulty components? I'm good with soldering, but not at all...
                            11-22-2024, 04:07 AM
                          • Loading...
                          • No more items.
                          Working...