Alex Corps
Member
Last Activity: 03-29-2025, 06:42 AM
Joined: 03-09-2025
Location: Reims
-
The TV is working again, thank you very much for this repair. -
Well, in any case, thank you very much for your time and the modification of the dump, I did not know this failure.Leave a comment:
-
It seems to be working, I got the red light back. It responds well to the remote.
I'll ask my colleague to take a picture of the TV in operation since I don't have the panel.βLeave a comment:
-
not write and not (S3, S7, S9, S14)
[ATTACH=JSON]{"data-align":"none","data-size":"full","title":"SREG3.png","data-attachmentid":3596042}[/ATTACH]...Leave a comment:
-
once checked
[ATTACH=JSON]{"data-align":"none","data-size":"full","title":"SREG2.png","data-attachmentid":3596010}[/ATTACH]...Leave a comment:
-
Hi, when I want to write the status registers I don't have the same thing as in your image at all. QE is not highlighted so I can't check it and other values ββare not present.
[ATTACH=JSON]{"data-align":"none","data-size":"full","title":"SREG.png","data-attachmentid":3596002}[/ATTACH]...Leave a comment:
-
Hi, when I want to write the status registers I don't have the same thing at all as in your image.[ATTACH=JSON]{"data-align":"none","data-size":"full","title":"SREG.png","data-attachmentid":3595995}[/ATTACH]...
Leave a comment:
-
I have nothing to lose, the TV won't start at all, I'll try it, we'll see.Leave a comment:
-
Thank you very much for the very nice detailed procedure. I'll come back soon to let you know if it's ok.Leave a comment:
-
Do I have to do the reprogramming and the status registers at the same time? Or flash with the fix dump and then do the manipulation for the status registers?Leave a comment:
-
ok, thanks for all this info, I'll try to figure it out, I'm not too comfortable with programming.Leave a comment:
-
Thanks for the dump, but I don't know how to do it for the status registers, so first I erase and write your dump in 25q40, but then how do I do it for the two status registers?Leave a comment:
-
Hello, I received my new clothespin, which seems to be of better quality.
So I did a first dump with Asprogrammer. If that doesn't work, I can do another dump with another application if you can advise me. Thank you.β...Leave a comment:
-
Hi, I bought another clothespin, as soon as I receive it, I'll try another dump.Leave a comment:
-
ok, so the tv has to be disconnected permanently?Leave a comment:
-
ok thanks, that's very nice of you. i should maybe solder a soic8 support, in case it happens again i would just have to extract the eprom and reprogram it or make some in advance to be able to replace it quickly in case of recurrence. i bought another clamp of better quality i'm waiting for it. thanks again it's great.Leave a comment:
-
the only solution is therefore that I buy a motherboardLeave a comment:
-
ok, so what should I do to fix this problem?...Leave a comment:
-
Hi, I don't have the screen at the moment, I just have the power supply board, the motherboard, the IR sensor and the power button....Leave a comment:
-
yes my clamp does not hold properly, so I made a second copyLeave a comment:
No activity results to display
Leave a comment: