Re: Vizio P502UI-B1E No Picture Flashing Standby Light
If you get a change on PS_ON when you push the power button would suggest the main is at least partly working, and the micro understands the power command and changes the PS_ON pin.
Also note that the plugs CN9101/3 has two rows of pins (14 pins), and CN9101 has 16 pins .
Do you get +24 volts when the power button is pressed?
If you get a change on PS_ON when you push the power button would suggest the main is at least partly working, and the micro understands the power command and changes the PS_ON pin.
Also note that the plugs CN9101/3 has two rows of pins (14 pins), and CN9101 has 16 pins .
Do you get +24 volts when the power button is pressed?
Comment