Eeprom dump thread!

[Gjackson]

Anyone have a dump for a SHARP lc-55sfe7332e?
Thank you

[lotas]

Anyone have a dump for a SHARP lc-55sfe7332e?
Thank you

Mainboard T.MS6308.711?

What problem do you have in your firmware?

[Gjackson]

Mainboard T.MS6308.711?

What problem do you have in your firmware?

Bootloop

[lotas]

Bootloop

What motherboard do you have (number), what panel?
Dump what you need, Nand?
Post your non-working dump here, I'll take a look.

[univers73]

Hello,

I need to flash the eeprom of this tcon :
Model : Samsung QE55Q80RAT
Tcon : BN94-14062G
Eeprom : 25Q40CLSIP

Thanks.

Please ? 😢

[lotas]

Hello,

I need to flash the eeprom of this tcon :
Model : Samsung QE55Q80RAT
Tcon : BN94-14062G
Eeprom : 25Q40CLSIP

Thanks.

Motherboard (textolite) bn41-02695a?
What's the problem with your dump?

[univers73]

Motherboard (textolite) bn41-02695a?
What's the problem with your dump?

The tv won't turn on, every voltage are present, checked the screen, backlight... It started with the TV randomly won't turn on, light present, no blinking. I can't check the motherboard's model right now.

[lotas]

The tv won't turn on, every voltage are present, checked the screen, backlight... It started with the TV randomly won't turn on, light present, no blinking. I can't check the motherboard's model right now.

But this could be a problem with eMMC, post your 24Q40 firmware here and I’ll take a look.

[univers73]

But this could be a problem with eMMC, post your 24Q40 firmware here and I’ll take a look.

Thank for your help, here the dump. By the way, also a pic of the model.

[lotas]

Thank for your help, here the dump. By the way, also a pic of the model.

Your dump is working, try yours, but with a cleared nvm.

[univers73]

Your dump is working, try yours, but with a cleared nvm.

I just tried, still no boot, i will continue my research, thank anyway for you help.

[univers73]

Your dump is working, try yours, but with a cleared nvm.

I have a last question, I have another eeprom on this tcon witch it contains the firmware (25q80), it is possible that it can be corrupted ?

[cccamgeek]

hard to find new come dumped from working set
"Haier LET29C800" OR "MGS eled29"
same in two brand name :
main MSDV3218-ZC01-01
Mainboard/chassis: MSDV3218-ZC01-01
Painel display LCD: V290BJ1-PE1
Dump flash SPI 25Q32

[kamaku]

Someone can check , After logo it restart again.

model: OK ODL32661HN-DIB
Main: TP.MS3663S.PB818
Panel HK315LEDM

[lotas]

Someone can check , After logo it restart again.

model: OK ODL32661HN-DIB
Main: TP.MS3663S.PB818
Panel HK315LEDM

Try with a clean NVM.

[lotas]

Does not work?

[kamaku]

Yes was not working, "power-up, logo and reset" .
Finally loaded the firmware for one "ok odl 32631H-SB EL" from post https://www.badcaps.net/forum/troubl...64#post1683821 , worked only remote control is diferent and used one universal one.
Thanks

[Ipyong tech]

hello,
I have samsung tv UA65NU7300g no power, no standby light but if i remove the connector of motherboard the backlight is working and 12.8 volts is present. need help for dump file of IC1604 25q40cl.
i have backup of the original file. can please check my dump if its ok. Thank you.
Hello.. Master lotas.. need your help. thank you

[lotas]

hello,
I have samsung tv UA65NU7300g no power, no standby light but if i remove the connector of motherboard the backlight is working and 12.8 volts is present. need help for dump file of IC1604 25q40cl.
i have backup of the original file. can please check my dump if its ok. Thank you.
Hello.. Master lotas.. need your help. thank you

Mainboard ?
I don't see a problem with your dump, it's working.

[Ipyong tech]

thank you.. master lotas for checking my dump... now i know that my dump is good. the problem maybe somewhere in motherboard.