Announcement

Collapse
No announcement yet.

samsung 58 inch plasma

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Re: samsung 58 inch plasma

    ZD2001? That isn't a fuse unfortunately. F2000 is, though.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment


      Re: samsung 58 inch plasma

      dam i thought i was on to somthin i have it span round and just the power plugged in im only getting 1.5v in some places though

      Comment


        Re: samsung 58 inch plasma

        Any places to check on the back ?
        Attached Files

        Comment


          Re: samsung 58 inch plasma

          Nothing stands out, but I do have one other thing to check. Can you get a picture of the connection area around the white ribbon cable going into the X-main board? It runs from the control board.
          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

          Comment


            Re: samsung 58 inch plasma

            Just here ?
            Attached Files

            Comment


              Re: samsung 58 inch plasma

              I'm interested primarily on the X-main side but that ribbon yes. The X-main side could have some test points.
              Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
              For service manual, schematic, boardview (board view), datasheet, cad - use our search.

              Comment


                Re: samsung 58 inch plasma

                Here?
                Attached Files

                Comment


                  Re: samsung 58 inch plasma

                  any ideas i aint

                  Comment


                    Re: samsung 58 inch plasma

                    i might have a bit of info i have a t con board from a 50 inch its not the same but close so i plugged it in and tried it .now when i got the tv it had a fried data ribbon from the t con to the y main so i bought 2 i plugged it in and as soon as i did the t con fried the data ribbon or started too again ?

                    Comment


                      Re: samsung 58 inch plasma

                      Just a bit busy right now with coursework, I'll try and update later.
                      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                      Comment


                        Re: samsung 58 inch plasma

                        ok no problem

                        Comment


                          Re: samsung 58 inch plasma

                          Any more ideas

                          Comment


                            Re: samsung 58 inch plasma

                            I didn't see your post; thought you had not responded. Do you still have the scope?
                            Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                            For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                            Comment


                              Re: samsung 58 inch plasma

                              Yer I loaned it on the never never ha ha

                              Comment


                                Re: samsung 58 inch plasma

                                OK, leave it at 10ms/div but set it to 1V/div.

                                Take a picture of the waveform you see on each point.
                                Attached Files
                                Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                                For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                                Comment


                                  Re: samsung 58 inch plasma

                                  This must be a common problem because I have just got 2 50inch plasmas with the same problem

                                  Comment


                                    Re: samsung 58 inch plasma

                                    Tom just testing the points now ill start left to right with pics

                                    Comment


                                      Re: samsung 58 inch plasma

                                      Here goes
                                      Attached Files

                                      Comment


                                        Re: samsung 58 inch plasma

                                        No 2
                                        Attached Files

                                        Comment


                                          Re: samsung 58 inch plasma

                                          Nothing from pin 3

                                          Comment

                                          Working...
                                          X