HP 840 G7 password

[smallvhin]

same issue admin password.
iM using uploaded file here. Its working
they show end point security
I reset security settings no luck.

clean my bios file
main & ec
more thanks🙏

[rex98]

same issue admin password.
iM using uploaded file here. Its working
they show end point security
I reset security settings no luck.

clean my bios file
main & ec
more thanks🙏

are you kidding me? you said clean me!. you didn't mention any bios password or absolute. next time describe your problem.

[rex98]

Master pls. help me to clean dump file.
SN:5CG0465ZFL
ProdID: 24X44UC#UFF
more thanks master🙏

only flash this main do not touch the EC.
First boot press f10 reset bios to factory defaults and exit, 2nd boot reset security settings to defaults and exit.
Use BCU to fill these DMI info. you can permanently disable absolute in BCU.

Serial Number: 5CG0465ZFL
Product Number: 24X44UC#UUF
CT Number: PJSCQ00WBEGEIO
Description: HP EliteBook 840 G7 Notebook
build_id: 20WWCMBT601#SUUF#DUUF
Feature Byte: 3X476J6S6b7B7H7M7Q7W7m7saBaEapaqauawbUbhcAdUdpdqfPguhKhkjhk8mE.ye
MAC Address: 60-6D-3C-7A-61-10

[smallvhin]

only flash this main do not touch the EC.
First boot press f10 reset bios to factory defaults and exit, 2nd boot reset security settings to defaults and exit.
Use BCU to fill these DMI info. you can permanently disable absolute in BCU.

Serial Number: 5CG0465ZFL
Product Number: 24X44UC#UUF
CT Number: PJSCQ00WBEGEIO
Description: HP EliteBook 840 G7 Notebook
build_id: 20WWCMBT601#SUUF#DUUF
Feature Byte: 3X476J6S6b7B7H7M7Q7W7m7saBaEapaqauawbUbhcAdUdpdqfPguhKhkjhk8mE.ye
MAC Address: 60-6D-3C-7A-61-10

late reply master.
more thanks it's working 👍

[thelibrary]

swat lock remove pls

[SMDFlea]

RULES UPDATE for BIOS requests/offers AVOID BANNING, READ BEFORE POSTING
https://www.badcaps.net/forum/troubl...before-posting

You MUST:

• Provide the full machine model number, serial number (or Service tag, SNID) and the board model number (see https://www.badcaps.net/forum/showthread.php?t=88758 ) ,The serial number, make, full model number, motherboard model and revision (except QR codes) must be written/typed at your request as per the rules. Not as a picture, part of the file name and so on.

[rex98]

swat lock remove pls

serial number?

[thelibrary]

ELITEBOOK 840 G7 swat lock remove pls.



sn: 5CG050CDQQ

[hoaca388]

ELITEBOOK 840 G7 swat lock remove pls.



sn: 5CG050CDQQ

AAA

[thelibrary]

do i need to flash both?

[hoaca388]

do i need to flash both?

Yes

[trepachka]

Hi, I have a Elitebook 840 G7 laptop. It had a admin password until got rid of it using a bin file in one of the postings.

However, on every boot, I am getting "There is a problem with the HP Endpoint Security Controller". Can you help me remove this message from popping up?

S/N 5CG1247CPR
ProdID 2Z4G6UC#ABA

I am also attaching both bin files.

[alfredposadas09]

Hi, I have a Elitebook 840 G7 laptop. It had a admin password until got rid of it using a bin file in one of the postings.

However, on every boot, I am getting "There is a problem with the HP Endpoint Security Controller". Can you help me remove this message from popping up?

S/N 5CG1247CPR
ProdID 2Z4G6UC#ABA

I am also attaching both bin files.

can u read ur 32mb main again because the file is corrupted

[trepachka]

Ok, I am attaching original bin files. So, this one has the admin password in it. If you could just remove the password, this should fix my other issue as well.

[hoaca388]

Ok, I am attaching original bin files. So, this one has the admin password in it. If you could just remove the password, this should fix my other issue as well.

CCC

[trepachka]

After reflashing the bin files, caps lock is blinking 7 times.

[m.sabry2110]

Ok, I am attaching original bin files. So, this one has the admin password in it. If you could just remove the password, this should fix my other issue as well.

try

[trepachka]

Yes, these files worked for me. The password was gone and I had to use BCU to get out of the manufacturing mode by filling out empty fields. Otherwise, computer is good to go. Thank you.

[malangg]

HI, CAN YOU PLEASE REMOVE PASSWORD FOR ME. THANKX IN ADVANCE

[rex98]

HI, CAN YOU PLEASE REMOVE PASSWORD FOR ME. THANKX IN ADVANCE

serial number?

[alfredposadas09]

HI, CAN YOU PLEASE REMOVE PASSWORD FOR ME. THANKX IN ADVANCE

first boot press f10 then go factory default setup