Re: HP 840 G7 password
Help All Master
Pls.. remove bios password and asset tracker lock to internet
TIA
Help All Master
Pls.. remove bios password and asset tracker lock to internet
TIA
-
Last edited by SMDFlea; 03-29-2023, 03:47 AM. -
Re: HP 840 G7 password
hello gays i have hp 850 g7 with password can you help me ??Last edited by SMDFlea; 03-29-2023, 03:47 AM.Comment
-
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests
all donations are welcome,
see the donate button at the bottom of the page, or
>>>>> click on this link to donate via PayPal. <<<<<
Every donation made will go towards server fees and maintenance costs.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
Re: HP 840 G7 password
good afternoon friends help me please unlock bios.thank you very muchLast edited by SMDFlea; 03-29-2023, 03:47 AM.Comment
-
Last edited by SMDFlea; 03-29-2023, 03:47 AM.If you have found our forum useful please consider supporting us. Subscribe for a small monthly fee and receive extra benefits including our bios, boardview & schematic archive.
Subscribe to support us. It only takes 1 minute:
https://www.badcaps.net/settings/subscriptionsComment
-
Re: HP 840 G7 password
good afternoon friends, please unlock bios and swat locked/device freeze-4835Last edited by SMDFlea; 03-29-2023, 03:47 AM.Comment
-
Last edited by SMDFlea; 03-29-2023, 03:47 AM.If you have found our forum useful please consider supporting us. Subscribe for a small monthly fee and receive extra benefits including our bios, boardview & schematic archive.
Subscribe to support us. It only takes 1 minute:
https://www.badcaps.net/settings/subscriptionsComment
-
Last edited by SMDFlea; 03-29-2023, 03:47 AM.If you have found our forum useful please consider supporting us. Subscribe for a small monthly fee and receive extra benefits including our bios, boardview & schematic archive.
Subscribe to support us. It only takes 1 minute:
https://www.badcaps.net/settings/subscriptionsComment
-
Re: HP 840 G7 password
Hello
I have here an Elitebook 840 G7 with BIOS password and managed to read the 16MB chip on the underside of the board.
Also I read the 32MB chip which are both uploaded here. Can somebody help me to unlock ?
I tried with RCunlocker and it says Unlocked for the 16MB reading but didnt displayed all the infos that it displays normally for other laptops of the older HP series, and I am not sure that RCunlocker works well for this model so I dont want to risk writing that....
And I opened the file with HxD but I am not finding the serial of the laptop inside the file, and I suspect that maybe reading was not done well with the RT809H
Thanks very muchLast edited by SMDFlea; 03-29-2023, 03:47 AM.Comment
-
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests
all donations are welcome,
see the donate button at the bottom of the page, or
>>>>> click on this link to donate via PayPal. <<<<<
Every donation made will go towards server fees and maintenance costs.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
If you have found our forum useful please consider supporting us. Subscribe for a small monthly fee and receive extra benefits including our bios, boardview & schematic archive.
Subscribe to support us. It only takes 1 minute:
https://www.badcaps.net/settings/subscriptionsComment
-
Re: HP 840 G7 password
Done thanks
At first start there was an error Endpoint Protection but it disappeared nowComment
-
Re: HP 840 G7 password
Do two unlock methods done at the same time interfere with each other?Comment
-
Re: HP 840 G7 password
PLEASE HELP ME REMOVE PASSWORD BIOS HP ELIEBOOK 840 G7 10 GEN
camelia-6050a3136201-mb-a01Last edited by SMDFlea; 03-29-2023, 03:47 AM.Comment
-
Re: HP 840 G7 password
HereLast edited by piernov; 12-27-2022, 06:45 AM.If you have found our forum useful please consider supporting us. Subscribe for a small monthly fee and receive extra benefits including our bios, boardview & schematic archive.
Subscribe to support us. It only takes 1 minute:
https://www.badcaps.net/settings/subscriptionsComment
-
Hello, I have an old Dell G3 3579 (ST: 2WQ7LP2-8FC8) with a newer 8FC8 BIOS password. I have successfully attached to the flash chip (W25Q128JVSQ) on the motherboard with a CH341A programmer and made several modifications using Intel FIT (e.g., allow software SPI write) without bricking. I was also able to boot to a modified GRUB shell where I attempted to edit many BIOS security related options like BIOS Guard/Lock, Flash Signature Override, ME FW Image Re-Flash, etc.
Unfortunately, some of these modifications like to Intel BIOS Guard failed because it is fused into the PCH. Also,... -
x1403za r2.1 bios uefi password any one clear my bin file
serial NBN0CV10581747C
board id X1403ZA MAIN BOARD R2.1
bin file
https://drive.google.com/file/d/1jBD...ew?usp=sharing -
Dear Badcaps,
Is there any available method to perform a bios password unlock on an ThinkPad L14 Gen 4?
CPU is Ryzen 3 PRO 7330U.
What about though Lenovo? It has the best support plan. They asked for the receipt, however it was sold though a reseller.
As a sidenote I was always able to unlock any dell laptop with the master code by simply asking dell and providing a reseller/refurbisher receipt.
Thank you very much! -
Hi everyone
I noticed on the Xgpro software the BIOS backup files have extra bytes at the end when reading some chips, this is because the Xgpro software also reads the OTP region of those flash chips, and by default will append that region to the saved file
Programmer models: XGecu TL866II Plus / T48 / T56 / T76
Example: GD25LQ128D (1.8V), IC size is listed as 0x1000000 Bytes (16777216 bytes) + 0xC00 bytes, those extra 0xC00 bytes will be appended to the end of the saved file by default, resulting in a file size of 16780288 bytes
There's also an extra OTP Secu.R... -
Hello everyone, I come here to tell you my problem regarding the power-on password. It is not a bios reset demand, and i can't have any access to windows. This is the bios and power-on password that is blocking all other things.
My Omen 15-dh0052nf purchased second-hand was configured with the bios password upon purchase (very simple password :P ).
Having decided to sell it in order to get something more powerful, I reset all BIOS settings and set a blank administrator password. But the power-on password cannot be changed to a blank one so I let the actual password set....
Comment