hello friends i have hp 840 g7 with password i try with unlock1 but its not unlock can any friend unlock this file please
Try our new boardview, bios, & schematic search. Over 1.3 million files for download!
HP 840 G7 password
Collapse
X
-
If you have found our forum useful please consider supporting us. Subscribe for a small monthly fee and receive extra benefits including our boardview / schematic archive.
It only takes 1 minute:
https://www.badcaps.net/settings/subscriptions -
Last edited by SMDFlea; 03-29-2023, 03:47 AM.If you have found our forum useful please consider supporting us. Subscribe for a small monthly fee and receive extra benefits including our boardview / schematic archive.
It only takes 1 minute:
https://www.badcaps.net/settings/subscriptionsComment
-
If you have found our forum useful please consider supporting us. Subscribe for a small monthly fee and receive extra benefits including our boardview / schematic archive.
It only takes 1 minute:
https://www.badcaps.net/settings/subscriptionsComment
-
Last edited by SMDFlea; 03-29-2023, 03:47 AM.If you have found our forum useful please consider supporting us. Subscribe for a small monthly fee and receive extra benefits including our boardview / schematic archive.
It only takes 1 minute:
https://www.badcaps.net/settings/subscriptionsComment
-
Re: HP 840 G7 password
Hi everyone i have HP elitebook 840 G7. The board of it is CAMELLIA-6050A3136201-MB-A01(A1) with 3 bios chip 1st is W25Q256JVEN 2nd W25Q128JVPQ and last W25Q80DVIG. The problem of my laptop has password on its bios i have already flashed the dump of W25Q128JVPQ I will attach it.
And also whenever i connect it to the internet it shows system lock and i cannot use it anymore, so for me to be able to use it i need to reformat it again without deleting the partition on drives. Does formating the whole drive(deleting all the partition) will solve this issue on connecting to the internet?
I hope you can help me with my problem.Last edited by SMDFlea; 03-29-2023, 03:47 AM.Comment
-
Re: HP 840 G7 password
Plllsssss help me with this!huhuhuhuHi everyone i have HP elitebook 840 G7. The board of it is CAMELLIA-6050A3136201-MB-A01(A1) with 3 bios chip 1st is W25Q256JVEN 2nd W25Q128JVPQ and last W25Q80DVIG. The problem of my laptop has password on its bios i have already flashed the dump of W25Q128JVPQ I will attach it.
And also whenever i connect it to the internet it shows system lock and i cannot use it anymore, so for me to be able to use it i need to reformat it again without deleting the partition on drives. Does formating the whole drive(deleting all the partition) will solve this issue on connecting to the internet?
I hope you can help me with my problem.Comment
-
If you have found our forum useful please consider supporting us. Subscribe for a small monthly fee and receive extra benefits including our boardview / schematic archive.
It only takes 1 minute:
https://www.badcaps.net/settings/subscriptionsComment
-
Last edited by SMDFlea; 03-29-2023, 03:47 AM.If you have found our forum useful please consider supporting us. Subscribe for a small monthly fee and receive extra benefits including our boardview / schematic archive.
It only takes 1 minute:
https://www.badcaps.net/settings/subscriptionsComment
-
Re: HP 840 G6 Bios Password
TryAttached FilesPremium supporters get full download access and other benefits.
Comment
-
-
-
Re: HP 840 G7 password
tryAttached FilesPremium supporters get full download access and other benefits.
Comment
Related Topics
Collapse
-
by zeniusHello, I have an old Dell G3 3579 (ST: 2WQ7LP2-8FC8) with a newer 8FC8 BIOS password. I have successfully attached to the flash chip (W25Q128JVSQ) on the motherboard with a CH341A programmer and made several modifications using Intel FIT (e.g., allow software SPI write) without bricking. I was also able to boot to a modified GRUB shell where I attempted to edit many BIOS security related options like BIOS Guard/Lock, Flash Signature Override, ME FW Image Re-Flash, etc.
Unfortunately, some of these modifications like to Intel BIOS Guard failed because it is fused into the PCH. Also,...-
Channel: BIOS Requests ONLY!
-
-
by rbdealmeidaHi everyone,
My name is Ricky and I'm a repair technician/enthusiast. I've been learning a lot from this community and have successfully done some basic BIOS unlocks in the past, but this particular modern HP model is giving me a really hard time!
I need some help manually removing the BIOS administrator password from this machine.
I have already tried using the "HP G9 Unlocker V3.0" on my 32MB dump. I successfully bypassed the U68 Sure Start chip (SPI NAND) by isolating Pin 8, preventing the auto-recovery. The machine boots and bypasses Sure Start,...-
Channel: BIOS & Schematic Requests!
-
-
by MONDTECHx1403za r2.1 bios uefi password any one clear my bin file
serial NBN0CV10581747C
board id X1403ZA MAIN BOARD R2.1
bin file
https://drive.google.com/file/d/1jBD...ew?usp=sharing-
Channel: BIOS Requests ONLY!
-
-
by miharestoreDear Badcaps,
Is there any available method to perform a bios password unlock on an ThinkPad L14 Gen 4?
CPU is Ryzen 3 PRO 7330U.
What about though Lenovo? It has the best support plan. They asked for the receipt, however it was sold though a reseller.
As a sidenote I was always able to unlock any dell laptop with the master code by simply asking dell and providing a reseller/refurbisher receipt.
Thank you very much!-
Channel: BIOS Requests ONLY!
-
-
by m1ch43lzmHi everyone
I noticed on the Xgpro software the BIOS backup files have extra bytes at the end when reading some chips, this is because the Xgpro software also reads the OTP region of those flash chips, and by default will append that region to the saved file
Programmer models: XGecu TL866II Plus / T48 / T56 / T76
Example: GD25LQ128D (1.8V), IC size is listed as 0x1000000 Bytes (16777216 bytes) + 0xC00 bytes, those extra 0xC00 bytes will be appended to the end of the saved file by default, resulting in a file size of 16780288 bytes
There's also an extra OTP Secu.R...-
Channel: BIOS Requests ONLY!
-
- Loading...
- No more items.
Comment