I read the steps to replace capacitors and the step 2 of the equipment needed found here:
https://www.badcaps.net/index.php?pageid=overview
says to not use a mechanical solder sucker, they can damage the board. I was planning on using a vacuum one like this
Is that ok? If it is, what exactly is a mechanical solder sucker, can anyone link to a picture of one?
https://www.badcaps.net/index.php?pageid=overview
says to not use a mechanical solder sucker, they can damage the board. I was planning on using a vacuum one like this
Is that ok? If it is, what exactly is a mechanical solder sucker, can anyone link to a picture of one?
Comment