Re: Panasonic tx47as650b no reaction to remote.
its always something simple
Panasonic tx47as650b no reaction to remote.
Collapse
X
-
Re: Panasonic tx47as650b no reaction to remote.
Ok then, actually solved 48 posts ago.Leave a comment:
-
-
Re: Panasonic tx47as650b no reaction to remote.
Just have to match the remote to the TV model.Leave a comment:
-
Re: Panasonic tx47as650b no reaction to remote.
Hi guys,
I can confirm the tv works fine with a genuine non vestel remote.
So would this mean there are 00s of customers out there scratching their heads wondering why the tv doesnt work after they lose the original remote and happen to purchase a vestel one.?Leave a comment:
-
Re: Panasonic tx47as650b no reaction to remote.
I did take a look at the mainboard of the other Panasonic and you are correct.!!
It has a Vestel board. Will be getting a universal today and will update.
ThnxLeave a comment:
-
-
Re: Panasonic tx47as650b no reaction to remote.
did you ever try a universal remote control?Leave a comment:
-
Re: Panasonic tx47as650b no reaction to remote.
Photo of the remote that originally came with the TV.Last edited by diif; 06-24-2020, 05:07 AM.Leave a comment:
-
Re: Panasonic tx47as650b no reaction to remote.
Is there a test for this I can carry out.?Leave a comment:
-
Re: Panasonic tx47as650b no reaction to remote.
One is for the tx 48cx400b .The other I bought specifically for this tv.I dont know the original model it was for.Leave a comment:
-
Re: Panasonic tx47as650b no reaction to remote.
The remotes that you have right now, what TV models are they made for?Leave a comment:
-
Re: Panasonic tx47as650b no reaction to remote.
So we can conclude that from these tests it MUST be the wrong remote.?Leave a comment:
-
Re: Panasonic tx47as650b no reaction to remote.
So you do see activities at the IR OUT test point as shown in the updated pictures?
If that is the case, the IR module is not dead. May be you do need to get the correct remote for this TV.Leave a comment:
-
-
Re: Panasonic tx47as650b no reaction to remote.
Ok at those new test points,
I am now getting a voltage drop when remote buttons pressed.
Power button forces volt drop from 3.2 to 2.9v
Other buttons 3.2v to 3.1vLeave a comment:
-
-
Re: Panasonic tx47as650b no reaction to remote.
i do think you are best to get the correct remote for the set and start again .Leave a comment:
-
Re: Panasonic tx47as650b no reaction to remote.
Check the Voltage at the IR out as shown in the updated pictures to see if you get any Voltage activities when you hit the remote control buttons.Leave a comment:
-
Re: Panasonic tx47as650b no reaction to remote.
I have to go to bed now but really appreciate the help.
Ill be back on early to check for any updates etc.
GoodnightLeave a comment:
Related Topics
Collapse
-
by CapLeakerGot a new victim:
AcuRite 5 in 1 Iris outdoor weather station not updating the temperature / humidity anymore. The original sensor is a SHT21. Also there are identical other sensor manufacturers. I chose the HTU21D to replace the original SHT21. Both have identical specs. I've had two failure modes with these sensors.
A: outside temp stuck at -40?It's cold here at times in Canada, but not that cold!
B: stuck at some temperature and maybe updating once in 12 hrs or so.
Easy solution is to go to AcuRite website and purchase the sensor. Right?...
-
by ChrissygizmoHi all, I’ve got a problem I hope someone can help me fixi.
I have a Panasonic TX-48CX350B tv , it powers up ok but the screen is blank, the backlights are working, there’s nothing else though, no picture or sound. I’m not sure what the fault is called whether it’s BLANK/ BLACK/ or WHITE SCREEN I’ve actually came across this before on a similar tv but just ended up scrapping it, I will upload pictures of the boards etc , if anyone could help me I would really appreciate it...01-11-2025, 03:18 PM -
by JackchingDoes anyone know if there is a repair for the remote sensors for these televisions? It only seems to work when it wants to. I tried a different remote and also tried factory resetting the TV. I find if i go close to the sensor that it'll work but outside 2 feet it wont.
-
by VaporGameI recently pulled out my tv from the attic that I remember bricking as a child with the service menu. I remember at the time it came on but didn't react to anything. I have tried a factory reset from the remote and a EEPROM reset but neither worked. I get no led light.
Here are the things i already tried and did:- Checked the power supply (There was a burnt transistor but looking online its a common issue and its not crucial for the tv to run)
- confirmed the power supply outputs the correct voltages
- many remote button combinations
- confirmed the backlight works (lights up when motherboard
3 Photos -
by groomitHi,
I just replaced the battery on a Google Pixel 5.
After that the proximity sensor isn't functioning properly any more. It is constantly activated. So when playing a voice message on Whatsapp, the Screen instantly turns off.
Checking with a sensor app I can verify weird behavior of the sensor. It is triggered when nothing is near and sometimes works correctly when squeezing the phone next to the sensor hole.
The rubber seal is on again (as mentioned in various suggestions in other forums).
This smells like a cold or broken solder joint. So I'd like to reflow... - Loading...
- No more items.
Leave a comment: