VaporGame
Member
Last Activity: 09-03-2024, 03:30 PM
Joined: 08-29-2024
Location: MaĆopolskie
-
I understood nothing in that reply lol. I just wanted to have a TV for watching things and as a display for fixing and testing things.... -
Ohh those, I'm too young to say I've ever used those but i think i know what those are. I will not try to remember since it's 1:35am here....Leave a comment:
-
Also just out of curiosity, this thing has a "COMMON INTERFACE" port on the back, and i have the thing that goes in it somewhere, but what is it for actually?Leave a comment:
-
Leave a comment:
-
Lemme put it back together first, its 12am....Leave a comment:
-
It works!!!! Thank you all for your help, without it I would have never figured this out.
How can i mark the thread as solved or something?Leave a comment:
-
yea it matched up, should i continue to try and boot the tv?...Leave a comment:
-
Upon further inspection, what i read back had a lot of things replaced by FF.
Messing around some more i got it to write correctly.Leave a comment:
-
Okay so i lowered the resistor to ~660ohm, and it read fine, I'll try flashing.
It flashed fine, but when i read the contents, they looked okay. Should i try to desolder everything and try to power it?Leave a comment:
-
I tried that aswell, same issue.
I have installed all the drivers that were in the provided software. What can i use to debug the problem? The event log isn't very useful.
Should i have the board be plugged in only into the programmer?...Leave a comment:
-
okay so i got everything running, checked my wiring, but it says it failed writing everytime. I am trying to flash the bin provided earlier in the thread....Leave a comment:
-
I was thinking of trying to do this with wine, (I don't have anything running windows in my home atm) but I think I'll spare myself the pain and just use qemu with a windows installation...Leave a comment:
-
where exactly do i wire the resistor? Also my board came with a jumper placed, do i remove it? It looks like it switches modes but its in chinese, one says something and the other has TTL and something.
Also the schematic you provided provides 3.3v (which i also have from the programmer if needed) instead of five, and the resistor there is 2.2kom....Leave a comment:
-
Sooooooo, the programmer WAS supposed to arrive last Friday, but it just didn't. I have it now though.
I wanted to say that I may not be a engineer but i do have some software skills and a bunch of free time. Iirc the microcontroller was pretty well documented. Thank you for your concerns though.
I'll attach some pics of the programmer, and the documentation and software i got with it. (The documentation is in polish but there is probably a English version somewhere)...Leave a comment:
-
I should get 24H delivery so I can start flashing it tomorrow. I would order it from aliexpress if i didn't care about time but i really just wanna get this done quick....Leave a comment:
-
Yea prices are very different in different economies. I have a Turkish friend and when he told me his prices i was surprised toođ....Leave a comment:
-
I actually got one really cheap from a store that is based in Poland. In USD it should be around 7,45....Leave a comment:
-
Are there any cheaper options? I probably will rarely if ever use a programmer like that again, I don't care about speeds or anything I just need something that gets the job done. For the price of either of those where i live i could get a new mainboard....Leave a comment:
-
I have sat like that freezing the chip and my fingers off for a good 5 minutes but it didn't help....Leave a comment:
-
I don't wanna spend a lot of money on this TV since I just wanted to fix it since it might come in handy one day for something.
For the prices of the mainboards I could just get a professional to do it for me not that far away from where i live....Leave a comment:
No activity results to display
Leave a comment: