Hello, I have just replaced the LED strips in my Sharp LC-50LB481U. However, the menu/picture is now completely shifted on the screen. Any suggestions?
-
-
Re: Shifted Screen
What do mean by 'shifted'? Show us the pictures.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809 -
Re: Shifted Screen
The screen shifted to the right and down and now has lines. Once I started to put it back together, is when the picture screwed up. I had a perfect picture once I switched out the lights and screened it up to see what it looked like. However, after putting it back together is when I turned it on to see the screen. The more I mess with it now, the more the picture becomes distorted.Attached FilesComment
-
-
Re: Shifted Screen
Additional picsAttached FilesComment
-
-
Re: Shifted Screen
The picture is not shifted, you damaged the lcd screen, top left corner and likely elsewhereComment
-
Re: Shifted Screen
Yep, I agree with RJ. That does suck though, breaking it while putting it back together.Comment
-
Re: Shifted Screen
Really? The screen looks fine though, I see no evidence of damage.Comment
-
Re: Shifted Screen
Take it back down so you can see the whole screen and look it over real closely, flashlight laser light magnifying glass or glasses etc. it IS very easy to damage the screen or tabs on re-assembly, anyone who's never broke one is VERY lucky.Comment
-
Re: Shifted Screen
But what flashlight...??
THE SCREEN I BROKEN IN PIECES!! I BET MY ENTIRE BANK ACCOUNT..Comment
-
Re: Shifted Screen
If it was broken in pieces the OP would know it, DON'T YOU THINK???...THEN THERE GOES YOUR WHOLE BANK WAD.Last edited by nomoresonys; 04-19-2020, 10:49 AM.Comment
-
Re: Shifted Screen
Whatch the number of posts: 8... this is the anwser...Comment
-
Re: Shifted Screen
NOT doubting it's broken, just not in a million pieces.Comment
-
Re: Shifted Screen
what do you mean "mess with it" ... what are you messing with? Good chance that if you put on your glasses and check the seating of the ribbon cables at the tcon and panel, you may find the problem. Also ensure no frame members are touching any of the boards in the "wrong places"... also the right length of screw was put back in the right place. Check around the left bottom corner area.Last edited by budwich; 04-19-2020, 01:11 PM.Comment
-
Re: Shifted Screen
"Lesson 1: how to prolong an agony.."
no way..Comment
-
I have a 60 inch Samsung UN60EH6000F flatscreen TV. The screen went black a few months ago Sound is good, backlight is good, no menu. I replaced the TCon board with a used board purchased from Ebay. It worked fine for a 3-4 months, then the screen started βfading' back. Once again, sound is good, backlight is good, no menu. However, this time the picture looks fine for about 10-15 minutes, then fades back. If I power cycle the TV, the display reappears, for another 10-15 minutes, then fades black again. Repeatable ever time.
I ordered a supposedly βnew' Tcon board this time, and... -
Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!
My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.
This time the original cable broke too close to the screen, it can't be fixed without tearing the screen... -
Have a Samsung UN50NU7400 which shows a boot screen and a screen saver if left on long enough but no picture ?
Would a moving screen saver confirm that the panel is ok or it could still be a panel issue ? -
Hello, I need your help for a failure on a laptop:
It's a Packard Bell Kayf0, motherboard LA-5021P, Rev 1.0 with graphic issue.
I received this pc because it was turning on but not displaying anything, the fans are running normally and all chipsets heat up on startup but no picture on screen, no backlight either. I noticed that ENAVDD and ENVDD are not present and that there is no LCDVDD on the connector. I didn't check the screen because, maybe I'm wrong, but if there aren't these signals, even if the screen is good, it can't display anything? I tried heating the... -
Hello everyone.
I have this TV set which has this issue. It shows a vertical bar im the middle of the screen.
The panel has 12 cofs and the problem seems to be on the territory of the first cof on the right side.
The tv fires up and you can see a good picture exept that vertical part where multicoloured pixels exist.
The strange thing there is that you can see behind that snow that it shows picture but as if there are these pixels in front so you cannot see clearly.
The effect is there even on a completely black screen.
The screen...
Comment