Very blurry picture. Changed the one connect box and same problem. Tried disconnecting one side of the tcon but I guess that no longer shows half of the tv picture so I am kind of stuck. I would normally think the Tcon is the problem but other than ebay it is not in stock for a fair price, and on ebay it is $100.00. Hope anyone here can help.
samsung qn55q7famxza blurry picture
Collapse
X
-
Re: samsung qn55q7famxza blurry picture
https://www.badcaps.net/forum/attach...1&d=1577483494'
Double-image is usually panel Gate drive issue.
But at this point you no longer get anything on the screen?
Did you verify that the ribbon cables are not damaged or verify that they are put back in place correctly?Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809 -
Re: samsung qn55q7famxza blurry picture
I don't think it has gate drivers , i think it's a QLED panel and the tech behind that is not much known, we need better pictures 'cause is not photographed the main/av board and the board that resembles a tcon must be better caught in zoomed pict without the shield.Comment
-
Re: samsung qn55q7famxza blurry picture
https://www.cnet.com/news/qled-vs-ol...20-comparison/
Quantum dots are microscopic molecules that, when hit by light, emit their own, differently colored light. In QLED TVs, the dots are contained in a film, and the light that hits them is provided by an LED backlight. That light then travels though a few other layers inside the TV, including a liquid crystal (LCD) layer, to create the picture. The light from the LED source is transmitted through the layers to the screen's surface, which is why we say it's "transmissive."Last edited by budm; 12-28-2019, 04:10 PM.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: samsung qn55q7famxza blurry picture
I get a blurry pic if the flat cables to the panel are connected. If I disconnect one side or the other then no picture at all. I will try and get a better pic of the Tcon next week but with all of my medical appts and the holidays it may not happen. I will try and see if there is any damage to the gate drivers on the panel but not sure when that will happen.Comment
-
Re: samsung qn55q7famxza blurry picture
I need help with a 75" model like this one. with the one connect cable disconnected I see the "disconnect banner". when I connected the cable, the picture is distorted like a checker board. I ordered a new one connect cable and now i have no Image at all but the backlight changes as if video content were there. I have tried a different one connect box with the same results. Do I have a new defective one connect cable? thanksComment
Related Topics
Collapse
-
This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...09-07-2024, 05:50 AM
-
by TR103Hi, I have a Samsung UE50TU with:
- sound and backlight, but no picture
- when it arrived, it had a picture for a few seconds
- it keeps rebooting
- without ribbon cable between the two panel boards, it does not reboot but I have no picture
- without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
- when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.
- without cable between mainboard and lcd panel and with a jumpered... -
by shelby5041hi
i have a samsung lcd tv
it powers on with sound and backlight but no picture
all voltages from PS are good 12v 3.3v and 5v
whats odd is that at the tcon i tested voltage across the fuse on the tcon and i get 0v
i figured main board issue..so i ordered a used main board....when i put replacement main board in i still have same issue
no 12v at the tcon fuse
i disconnect the panel ribbon cables to rule out any panel issues and i still have no 12v at the tcon fuse
the odds of having 2... -
by DodgethisHello all,
This is my first post, but long term lurker on the form learning as much as possible about these TV's. I was given this TV as due to a power outage of constant On/off of power to TV. The TV originally would just click on and off (Typical Reboot Cycle). I opened the back of the TV, and troubleshooted by taking the 96 pin LVDS off one at a time to see if I had a picture on either side. I finally fixed the reboot cycle by finding the error on the left side of the screen off connector CN 1301, and the TV would stay on. Further troubleshooting led me to the driver boards where...5 Photos -
by MgiffuneI have a 60 inch Samsung UN60EH6000F flatscreen TV. The screen went black a few months ago Sound is good, backlight is good, no menu. I replaced the TCon board with a used board purchased from Ebay. It worked fine for a 3-4 months, then the screen started ‘fading' back. Once again, sound is good, backlight is good, no menu. However, this time the picture looks fine for about 10-15 minutes, then fades back. If I power cycle the TV, the display reappears, for another 10-15 minutes, then fades black again. Repeatable ever time.
I ordered a supposedly ‘new' Tcon board this time, and... - Loading...
- No more items.
Comment