Re: Sony NSX-32GT1 need blink codes.
all it does is blink 10 times after plugin. nothing else. sony emblem lights up
noonyf
New Member
Last Activity: 02-02-2024, 11:05 PM
Joined: 01-07-2014
Location: Longview Texas
-
Sony NSX-32GT1 need blink codes.
Hello, does anyone have the blink code for this model? I have the schematic but it doesn't list the blink codes. After the set is on for a minute or two, it will shut down and blink 10 times.
thanks -
Re: samsung qn55q7famxza blurry picture
I need help with a 75" model like this one. with the one connect cable disconnected I see the "disconnect banner". when I connected the cable, the picture is distorted like a checker board. I ordered a new one connect cable and now i have no Image at all but the backlight changes as if video content were there. I have tried a different one connect box with the same results. Do I have a new defective one connect cable? thanksLeave a comment:
-
Re: New Members - please post your introductions here
I'm a 30 year vet of TV repair working in East Texas. I've enjoyed following posts on here for several years now. Thanks for the support.Leave a comment:
-
Re: Samsung PN60E530 no picture
i have an update on this problem. my y-sus board doesn't have 3 small blue caps near the yellow transformer, BUT it does have one and it caused the problem. it was temperature sensitive. i also replaced the 8 pin dip regulator ic near the transformer. i hope this helpsLeave a comment:
No activity results to display
Leave a comment: