I would very much appreciate any help or guidance with attempting to repair this Sony LMD-2110W LCD broadcast monitor.
It shuts down when warm after running around 20min or so. I can only get it to turn back on by physically removing the power cable for around 1 minute. It will then run for around 10min and powers down again.
Sometimes on a cold start, I can see a little flicker in the backlight in the bottom quarter of the screen.
If required I can remove individual boards to take pictures of the back of each board.
pics attached.
zx81.
It shuts down when warm after running around 20min or so. I can only get it to turn back on by physically removing the power cable for around 1 minute. It will then run for around 10min and powers down again.
Sometimes on a cold start, I can see a little flicker in the backlight in the bottom quarter of the screen.
If required I can remove individual boards to take pictures of the back of each board.
pics attached.
zx81.
Comment