Update:
Many thanks to redwire !!!!!
It works after replacing the components!!!!!!
The MP6901DJ takes a long time to reach. (Aliexpress)...
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
-
thanks for replying
Had tested with a multi tester and the mosfets were fine....
Leave a comment:
-
Shure AC Adapter PS60E
Hi All
I had a Shure AC Adapter PS60E that was dead suddenly after a power outage.
Output 15V - 4A
60W Max
Capacitors were
Samxon RT on Primary Side
Samxon GF on Secondary Side
Did some troubleshooting and observed that
SS210 is Shorted at D6
Seeking help to Identify IC2 as comparing with a working adapter, having shorted reading.
Thanks ))))3 Photos
-
I had deployed on one site before, using ubiquiti, with parabolic antenna
most had raised a good point is LOS
normally my concern is lighting strike on the pole which can fry those connected devices, thus some sites we do this:
[U][B]Main Office[/B][/U]
Customer Network > Customer Network Switch > [U]Fiber Media Converter > Fiber Cable > Fiber Media Converter[/U] > Power Injector > Parabolic Antenna
[U][B]Remote Site[/B][/U]
Outdoor Antenna > Power Injector >[U] Fiber Media Converter > Fiber Cable...
Leave a comment:
-
Re: i7-4790k makes the computer freeze up during startup
seems to have a faulty processor...
[url]https://www.intel.com/content/www/us/en/support/articles/000005567/processors.html[/url]Re: i7-4790k makes the computer free...ors.html[/url]
Leave a comment:
-
Toshiba 29PB200E LED TV - Black Screen
Hi All
I had a Toshiba LED TV which was not working.
There were no screen or display / sound.
This happen just as usual, turning on the television, and there were no screen display on it.
Only Power LED.
Remote control seems to be able to capture and process/
Things I had checked.
LED Strips is turning ON When startup.
Voltage are not fluctuating.
Check on the board on the common diodes, no shorts.
Disconnected T-Con connector from mainboard, but seems the...
-
Re: tplink vr600 modem router - Capacitor
[url]https://www.apaq.com.tw/en/product[/url]Re: tplink vr600 modem router - Capa.../product[/url]...
Leave a comment:
-
Re: HP 2311F Monitor: Flashing on & off
just to reply to say thanks to the folks and team here, my parents monitor recently have this same issues to and seems this IC after some time it will degrade, had replaced it and it was stable.
Leave a comment:
-
Re: Logitech Z906 Power Supply
anyway see this I also shake my head on this SMPS ....
almost the same fate as the altec lansing mx6021
those conductive glue... and when transistors shorts... it bring down those component around.
you are right, risk of missing items also....
Leave a comment:
-
Re: Synology NAS - stuck at 10mbps
normally need to inspect the board carefully, and check if there are any possible burnt traces.
check transformer, check network jack and another cable.
check components around the network chip.
another way is to replace the marvell network ic chip.
Leave a comment:
-
-
Re: Help HP Z440 workstation
just checking if you had tried with the same power supply?
Not sure if the power supply is standard...
the last time I had worked with Z400 ... PSU pin layout is a little different....
Leave a comment:
-
Re: Long range free wifi
some interesting sharing...
[url]https://www.youtube.com/watch?v=LG-AZz_nm5E[/url]Re: Long range free wifi<br /> <br ...AZz_nm5E[/url]
Leave a comment:
-
Re: Questions about VLANs and Cisco Hardware
im not sure.... but had you tried encapsulation dot1q on the router interface?
Leave a comment:
-
Re: Dell U2312H Repair
seems to be a common shit problem..
i have one at home..... after power off the mains.... very hard to on back...
need to leave on the mains for some time... around one hour to bring the monitor to on again.
Leave a comment:
-
Re: FYI: Reflashing Cisco AP1142
consider doing a image reload...
download the ios...
rename to c1140-k9w7-tar.default
start tftp...
use mode... and try see if helps
Leave a comment:
No activity results to display
Show More
Leave a comment: