All my Panasonic tv's will not connect to wifi the see the router.the just won't connect.They were working fine just suddenly stop working.I can use Ethernet cable and it will work just not through wifi.Any ideas what I can check.
-
-
Re: Panasonic tv will not connect to internet
Reset routerI assume no responsibility for any stupid suggestions I might post. -
Re: Panasonic tv will not connect to internet
X2.... does a computer connect via wifi?Comment
-
Re: Panasonic tv will not connect to internet
If the device has custom IP settings try enabling DHCP or allocating it a static IP you know to be free.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Panasonic tv will not connect to internet
Model number?Comment
-
Re: Panasonic tv will not connect to internet
Did reset and checked ip and Mac filtering.Ended up being that the Panasonic tv had caps on and my password was lower case letters.Thanks everyone for help.Comment
-
Re: Panasonic tv will not connect to internet
bad caps on ehComment
-
Re: Panasonic tv will not connect to internet
I can not belief I did not notice it right away.Comment
-
Re: Panasonic tv will not connect to internet
Lots of bad cap problemsI assume no responsibility for any stupid suggestions I might post.Comment
-
Hello, dear community. NEED A DIAGRAM of the HDD/SSD connector contacts as an example (a screenshot from the diagram of another laptop on which I have already done this and a photo of the patient's board) Maybe someone can make a screenshot of the diagram with the pinout? Or does someone have a diagram of the motherboard schematic?
I am asking, because not find the information myself anywhere. I have a PANASONIC CF19 MK2 laptop (Any revision will do, I do not think that the contacts in the connector are located differently) but finding a basket for it at reasonable prices is a problem.... -
I picked up a Panasonic NH-P70G2, though it would apply to the NH-P80G2, NH-P70G1 and NH-P80G1 models as well, as maybe some other models. This one was coming up with a H86 error. After lots of testing and googling it was an error with one of the thermistors in the condenser area.
The attached French service manuals is incorrect, TH11 is gray and is a 95k thermistor and TH12 is black and is a 35k thermistor.
In my case TH12 was bad. I was able to get a 35k thermistor on AliExpress. It's 6mm in diameter.
Unfortunately the whole machine has to come apart to fix it.
I have... -
Hello! yes I know there is already lots of information about this issue. I have a Panasonic TC-P55ST50 that originally displayed an 8-blink error code. Following the troubleshooting flowchart, I ended up replacing the SS board. However, even after replacing it, the issue persists. The TV turns on and stays on without displaying an image, and continuity is confirmed on all connectors. What am I missing here🤔?
Ok Im a mechanical engineer ...but I thought I was able to follow a rather simple flowchart for electric troubleshooting 😂.
TV Model: Panasonic TC-P55ST50
...11-20-2024, 08:52 PM -
I picked this one up today.
Previous owner says no signs of life.
TV looks immaculate and its a 2022 model year so I thought maybe the one connect cable was damaged.
Got it home and put it on the Kill-A-Watt power meter and it was completely dead.
The TV model is QN65LS03BAFXZA - version: CB06
The One Connect Box BN44-01066D / BN96-54788Q / BN39-02470A.
I immediately remembered EazyBone's Samsung The Frame TV no power....One Connect thread and am preparing myself to tear the One Connect open and hunt for dead parts.
Will keep you all... -
Hello!
I have a TV that I can't get any further with.
It is a Samsung UE 55HU8590 with one connect box.
When I turn on the TV without the one connect box, the animation on the TV tells me to connect the ocb.
As soon as I connect it, the TV restarts (panel goes dark) and the TV tries to start continuously (relay on the SMPS clicks about every 3 seconds).
Since the TV works without ocb, I assume that it can't be the PSU?!
I have measured all contacts of the one connect cable against GND on the ocb board and there is no short circuit anywhere.
Is there...
Comment