Stripes appeared on the screen. I opened the case and measured the voltages at the points on the T-con board. Here are the voltage readings, maybe someone will need them to diagnose the T-con's health. Only the TV-panel failed.

Who has a Panasonic CF-19, can you help? To directly connect the HDD to the connector in the laptop, you need to pin out the contacts on the CASE\CART for the hard drive, only 7 contacts are of interest. If you have a tester and a desire to help, I will be sincerely grateful, just call them (I attach a picture with numbered contacts, write which number is connected to which) Which contact on the connector is connected to which on the connector that is inserted into the laptop connector.

I will report the result with a photo report....

Hello, dear community. NEED A DIAGRAM of the HDD/SSD connector contacts as an example (a screenshot from the diagram of another laptop on which I have already done this and a photo of the patient's board) Maybe someone can make a screenshot of the diagram with the pinout? Or does someone have a diagram of the motherboard schematic?

I am asking, because not find the information myself anywhere. I have a PANASONIC CF19 MK2 laptop (Any revision will do, I do not think that the contacts in the connector are located differently) but finding a basket for it at reasonable prices is a problem....

Hello. I am asking you for a hint on how to solve the problem with my touchbook Panasonic CF53-2 standart model. After setting up the BIOS, the laptop displays the wrong image until Windows loads. (More precisely, it displays, but distorted, instead of the Panasonic image immediately after turning it on, it displays what is in photo #1 in the attached file) Then the image appears when Windows starts loading and then there are no problems with the screen until the reboot. If you enter the BIOS, just a black screen. If you connect an external screen, the image on it is the same as on the built-in...