Eeprom dump thread!

[crazycavan]

thank you very much

[Manucsl]

Hello.

My TV is a QE65Q800TATXXC Samsung TV.

Issue : When you plug the 220V, voltages are OK on the power board and you can hear the click from the relay, but TV is not starting when power button is pressed. Red led is blinking when you press power button. But no images or sound ( Back-light is off )
Then if you disconnect the cable from the main board to the power supply, the TV back-light turns on.
Any ideas to check would be very appreciated 😊

After reading some posts on this forum, I suspect an eeprom issue so I bought a CH341A to dump it.
You can find the dump attached to this message in zip format.

Can you please check this eeprom ? and may be correct it ?
Thank you very much for your help.

Manu

BN41-02752A MAIN AV BOARD BN41-02752A (BN94-00038G) - SAMSUNG
BN44-01068A LED DRIVER BOARD
BN95-06565A T-CON
BN44-01073A Power board

[Manucsl]

Nobody ??

[Willail]

Re: Eeprom dump thread!



Токаї ltl-1902e hk-7050-ci-v3.04-b

Hello Lotas,

I need the dump for a Hyundai TV. 32inch
Model 32D9A
Main TP.S506. PB801
Panel HKC Electronics HK315LEDM-0H08H AJ32T03

Thank you for your help.

[lotas]

Hello Lotas,

I need the dump for a Hyundai TV. 32inch
Model 32D9A
Main TP.S506. PB801
Panel HKC Electronics HK315LEDM-0H08H AJ32T03

Thank you for your help.

There is a white tag on the bottom bar of the panel and it has the panel number written on it, what is it?

[juan667134]

EPROM help me please
television model; QN55Q70RAG
motherboard model; BN41-02695A


IC1502-IC1503-IC801- IC701 EMMC

[Willail]

There is a white tag on the bottom bar of the panel and it has the panel number written on it, what is it?

Hello Lotas,

I send you the pictures of the panel number

Thanks

[lotas]

Try this one, it's a dump from Akai though, the remote might not fit...

[lotas]

Here's more...

[Willail]

Hello Lotas,

Thank you for the dump. I test the Akai dump but it doesn't work.
It could possible that the firmware is not the same on board TP.S506.PB801 and TP.S506.PB818.
I will test the 2nd file today. If i will send you the dump of my TV, could you fix it?

Thank a lot

[lotas]

Hello Lotas,

Thank you for the dump. I test the Akai dump but it doesn't work.
It could possible that the firmware is not the same on board TP.S506.PB801 and TP.S506.PB818.
I will test the 2nd file today. If i will send you the dump of my TV, could you fix it?

Thank a lot

Try this dump, it's smaller in size, don't pay attention, write it down as is.

[Willail]

Try this dump, it's smaller in size, don't pay attention, write it down as is.

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Hello Lotas,

Thank a lot for your file, the TV works again. You are the best !!!
Thanks

[lotas]

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Hello Lotas,

Thank a lot for your file, the TV works again. You are the best !!!
Thanks

OK!

[PNI E.]

Hello guys, I need the dump file for a Samsung ue55tu7170u someone can help me thanks, main board bn94 15314t

[porfyriadhs]

Hello am looking for firmware for Vestel tv 17mb171 32 inch tv . If anyone please help

[yokoono]

Hello am looking for firmware for Vestel tv 17mb171 32 inch tv . If anyone please help

1. What is the problem with the TV?
2. What is the TV model?
3. What is the panel code (VES315xxxx-xx-xx)?

[lotas]

Hello am looking for firmware for Vestel tv 17mb171 32 inch tv . If anyone please help

4. Which firmware, firmware via USB or Dump eMMC?

[porfyriadhs]

Hello again need firmware via usb because the tv goes to boot loop. It says not enought space and I couldn't make anything. Tv is Toshiba model 32la2063dg/2.

[SMDFlea]

Hello again need firmware via usb because the tv goes to boot loop. It says not enought space and I couldn't make anything. Tv is Toshiba model 32la2063dg/2.

Please post pictures that can be read that don`t need rotating..

[porfyriadhs]