-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Hello Lotas,
Thank a lot for your file, the TV works again. You are the best !!!
Thanks...
Willail
Member
Last Activity: 03-26-2025, 03:09 AM
Joined: 01-06-2016
Location: France, Breuillet
-
Hello Lotas,
Thank you for the dump. I test the Akai dump but it doesn't work.
It could possible that the firmware is not the same on board TP.S506.PB801 and TP.S506.PB818.
I will test the 2nd file today. If i will send you the dump of my TV, could you fix it?
Thank a lotLeave a comment:
-
Hello Lotas,
I send you the pictures of the panel number
Thanks
[ATTACH=JSON]{"data-align":"none","data-size":"medium","data-attachmentid":3597496}[/ATTACH] [ATTACH=JSON]{"data-align":"none","data-size":"medium","data-attachmentid":3597502}[/ATTACH] [ATTACH=JSON]{"data-align":"none","data-size":"medium","data-attachmentid":3597498}[/ATTACH] [ATTACH=JSON]{"data-align":"none","data-size":"medium","data-attachmentid":3597499}[/ATTACH]...Leave a comment:
-
Hello Lotas,
I need the dump for a Hyundai TV. 32inch
Model 32D9A
Main TP.S506. PB801
Panel HKC Electronics HK315LEDM-0H08H AJ32T03
Thank you for your help....Leave a comment:
-
Thank a lot for the procedure.
You are the best !! the TV works again with the files that you send to me.
Thanks a lot...Leave a comment:
-
Hello Lotas,
How are you? Thank for your reply. Do you have the files that i used on my usb stick? Could you give me the instructions for this update?
Thanks...Leave a comment:
-
Hello YOKOONO,
Thanks for the file. It is the same TOSHIBA 48L1433DG and TOSHIBA 48L1443DG.
Could you give me the procedure of the update of the firmware. I found that i have put the 3 files on a usb stick formatted in fat32. Then, i put on the tv of the bottom USB. Press the button OK and plug the tv. But, i don't have this button on my TV. Could you please help me?
Thanks...Leave a comment:
-
Hello Fpatrice,
I have some pb with the eprom of my tv Toshiba 48L1433DG. The tv doesn't work, stay in standby with red and green lights.
I dumped my eprom coud you tell me if you found some errors? Could you send me your version?
Thanks...Leave a comment:
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Hello Lotas
Thank a lot for your dumps. The first corrected dumb works well.
Thank you...Leave a comment:
-
Hello,
I have solved my power issue of my video card PNY GTX960 2GDR5.
But, i have another problem, no signal on hdmi output and the picture was blue on dvi output.
Could someone have the same problem?
ThanksLeave a comment:
-
Hello
Anybody have schematic for radeon hd 7870 vtx 2gdr5?
ThankLeave a comment:
-
Hello,
I have some problems with my video card PNY GTX960 2GDR5. No post and black screen of the start of window.
I check quickly my board, no short on the vrm.
Does someone has the boardview for the PNY GTX960 2GDR5 or could give me some advices for fixing my device ?
Thank...Leave a comment:
-
Hello Lotas,
Thank a lot for the two dumps. I will test them quickly.
Could you help me to fixed my graphic board Radeon HD7870 2G?
The graphic board was not use during 1year, then i used it 1 month ago, in my pc, no post and black screen. I check the mosfets, some of them seem to be bad but when i remove them and test them, they are good.
I don't understand why i have always shorts on the pcb when i test Drain and Source (Mosfets removed). Do you think that the gpu is shorted?
Some pictures of my graphic board
Thanks
...Leave a comment:
-
Hello Lotas
This is the file[ATTACH=JSON]{"data-align":"none","data-size":"full","title":"Sharp 25Q40 LC48.rar","data-attachmentid":3474491}[/ATTACH]Leave a comment:
-
Hello Lotas,
How are you? I have a pb with my sharp TV LC48CFE4042E, mainboard TP. MS3463S.PB711.
If i send you the dump of the spi fash of the TV, could you repair it?
Thanks...Leave a comment:
-
Hello Lotas,
I follow your advice for the writing of the chip and the tv starts.
I use Neoprogrammer. It is impossible to tick QE with ASprogrammer 21013 fix
You are the best.
Thanks a lot LotasLeave a comment:
-
Thank a lot for this useful advice.
I didn't know that i need to delete all status registers before erase the chip.
I will test this and give you the resultLeave a comment:
-
Thank you Lotas. I will test it by using Neoprogrammer.
Could you please give me some advices? When i push the button write to fix the status registers nothing happens.
Is this normal?
With Asprogrammer, it was impossible to tick the box QE when i fix the status registers
Thanks...Leave a comment:
-
samsung UE43MU6105KXXC
Hello, i have a TV Samsung UE43MU6105KXXC.
The TV doesn't turn on and no standby light. The problem started after a power failure
Could someone please check the file i dumped from 25Q40CL?
Thanks
Willail... -
Re: Samsung UN55MU6103F IC1604 dump
Hello Lotas,
Thank you for the dump eeprom 24C512. So, the 24C512 is not the problem for my TV. Probably the 25Q80 or the eMMC is faulty. I want to put another dump in the 25Q80. Is the same way to write the dump for 25Q40? May i put the registers? Do you know if someone who has this dump?
Thanks a lot...Leave a comment:
No activity results to display
Leave a comment: