Eeprom dump thread!

[turkay06]

Brandt B1928WHD LED

Please flash dump

[lotas]

Brandt B1928WHD LED

Please flash dump

Post your non-working dump here, I will restore it for you, which motherboard and which panel, you need their numbers.

[turkay06]

Post your non-working dump here, I will restore it for you, which motherboard and which panel, you need their numbers.

maın board:MS308C1-ZC01-01

PANEL:V185BJ1-PE1

[lotas]

maın board:MS308C1-ZC01-01

PANEL:V185BJ1-PE1

TRY.

[turkay06]

TRY.

sory not working

[lotas]

sory not working

This dump is working! Try this with a clean NVM, replace the flash with a new one or the problem is something else.

[turkay06]

This dump is working! Try this with a clean NVM, replace the flash with a new one or the problem is something else.

thanks my friend the file is working

[lotas]

thanks my friend the file is working

Ok!

[a_lik]

help me fix this bios please. I have no standby light ,thank you. Samsung UA55JU6000K BN94-09309Z

[THXFX]

hi, i am looking for the eeprom 25q80dvsig for Samsung UN43NU7100XZL BN41-02635A / BN94-13191C.

[joelectronic]

,n ,n,

[SMDFlea]

,n ,n,

huh

[arresio]

k32dlm4h

[masterm]

JVC LT-43C888 (manufactured by Vestel) - Looking for firmware (V.3.62.35.2) or (V0.51.19.3)

Images attached
Panel: VES430QNUL-2D-U01
Mainboard: 17mb130E

thanks

[maverikdj]

Hello any dump for Samsung UE40MU6450UXZT main board BN41-02568B. Thanks

[lotas]

Hello any dump for Samsung UE40MU6450UXZT main board BN41-02568B. Thanks

Someone else's dump won't help you, post your original dump here, I'll fix it for you.

[maverikdj]

Someone else's dump won't help you, post your original dump here, I'll fix it for you.

This is dump 25q40 and 25q80 thanks

[lotas]

This is dump 25q40 and 25q80 thanks

Your 25Q40 is not fixed, try it.

[maverikdj]

Your 25Q40 is not fixed, try it.

Hello i tryed but wont power on.

With Package 1 finded on internet tv turn on, sound is ok when i press remote control, but screen is blu. Flashed Q40 and Q80 with neoprogrammer 2.2.0.10
With Original Q80 and this q40 fixed form you wont turn on, black screen tv is dead

[lotas]

Hello i tryed but wont power on.

This was the original dump, the one I corrected. After recording, did you set status register (0x88, 0x42)? Why are you recording someone else's dump 25Q80, does it belong to T-CON (for each panel model, it will be different)?