Eeprom dump thread!

[dodysallam]

Re: Eeprom dump thread!

Ok

[dodysallam]

Re: Eeprom dump thread!

Ok think you

[dodysallam]

Re: Eeprom dump thread!

Think you again

[lotas]

Re: Eeprom dump thread!

It will be necessary to wait for a while, if possible, the core of dumps is badly damaged.

[dodysallam]

Re: Eeprom dump thread!

Ok try to find flash to this main board

[asas]

Re: Eeprom dump thread!

Hello,

I need this file (http://www.dl.toshiba.com/dtv/NA/GB/EN/32W1333DG.html) to try wake to my Toshiba 32W1333DG (LED flashes red/green), but the Toshiba site is down!
I need it to try to flash the TV via USB.
Can anyone help?

Thank you very much.



UPDATE:
The TV is working again!!

I found the firmware here:
https://www.elektroda.pl/rtvforum/topic3777677.html
https://www.elektroda.pl/rtvforum/do...php?id=1076150

And followed this instructions:
https://www.badcaps.net/forum/showthread.php?t=52483

"To install: Download the Zip folder and extract all the files on them to a Fat32 formatted Usb stick. After that insert the Usb into the LOWWER of the Usb ports on the Tv with the Tv ON and hold "ok" on the remote and the firmware upgrade will start."

I did it slight differently: I put the USB stick on the LOWWER port, but with the TV OFF! After that i pressed the OK on the remote and plugged the power cord (that was the only way it start reading the USB stick!) after that the power LED start flashing red/green faster and in the end the TV waked up!!

[gedmiri]

tv orion 32

Hello! i need usb software for
orion 32 or 17rds
chassis 17mb211
panel ves315wnds-2d-n14
23411971
sn 7889081 700399
thank you in advance

[lotas]

Re: Eeprom dump thread!

Pleas I want dump for seiki model se32hy27 main tp.ms3393.p85 think for help

Try everything Dump restored.

[jeff260z]

Re: Eeprom dump thread!

Hi all,

I'm looking for a dump for a Legend model: LE3233B
Main board is TP.MS3393.PB851
Panel is HW320WX2-206

Thanks

[lotas]

Re: Eeprom dump thread!

Hi all,

I'm looking for a dump for a Legend model: LE3233B
Main board is TP.MS3393.PB851
Panel is HW320WX2-206

Thanks

Post your non-working dump here, I'll fix it for you.

[fixmypc]

Re: Eeprom dump thread!

Hello everyone
Iam looking for a dump to this board:
TP-MT5522S-PC822

Its for a 50 inches, brand Silver Led TV.
My issue is that i cant get out of the android secure mode.
Thank all

https://obrazki.elektroda.pl/9371162300_1642626178.jpg

[sherif zayda]

Hisense LEDN46T28GP RSAG7.820.2121Re: Eeprom dump thread!

Hello everyone please dump
Hisense LEDN46T28NGP RSAG7.820.2121
25L3206
Thanks

[lotas]

Re: Hisense LEDN46T28GP RSAG7.820.2121Re: Eeprom dump thread!

hello everyone please dump
hisense ledn46t28ngp rsag7.820.2121
25l3206
thanks

dump hisense ledn46t28gp rsag7.820.2121

[sherif zayda]

Re: Hisense LEDN46T28GP RSAG7.820.2121Re: Eeprom dump thread!

dump hisense ledn46t28gp rsag7.820.2121

Thank you, I downloaded the flash and the screen turned on and everything is perfect except the sound does not work because I changed the screen model to version ledn40t26gp
The correct version is ledn46t28ngp
And I think it was the cause of the sound
And I want to see you cut off the sound and thank you for your presence

[lotas]

Re: Hisense LEDN46T28GP RSAG7.820.2121Re: Eeprom dump thread!

Thank you, I downloaded the flash and the screen turned on and everything is perfect except the sound does not work because I changed the screen model to version ledn40t26gp
The correct version is ledn46t28ngp
And I think it was the cause of the sound
And I want to see you cut off the sound and thank you for your presence

Post your non-working dump ledn46t28ngp here, I'll fix it for you.

[sherif zayda]

Re: Hisense LEDN46T28GP RSAG7.820.2121Re: Eeprom dump thread!

I do not read it to damage the flash, as it is not felt by the programmer rt809h
And I tried it on another programmer, big prog, and the other one does not feel it, and the flash is clearly damaged
And thank you for your interest

Post your non-working dump ledn46t28ngp here, I'll fix it for you.

[cheeky2]

Re: Hisense LEDN46T28GP RSAG7.820.2121Re: Eeprom dump thread!

I do not read it to damage the flash, as it is not felt by the programmer rt809h
And I tried it on another programmer, big prog, and the other one does not feel it, and the flash is clearly damaged
And thank you for your interest

Well the answer would be to remove the flash ic and programme a new one in its place. Surely if you reprogrammed the existing one then you would have made a copy of the original one? If you didn't then it's always good practice to make a backup of everything on the original TV before doing any work on it. For this exact reason if you make a mistake you can remedy anything you have already done afterwards to try and resolve the issues with the TV.
Get a new flash ic and programme it up beforehand and not using the incircuit programming of your programmers to do so. That way eliminating any issues with it determining what flash ic it's voltages etc. Manually select the flash ic to ensure correct specs of flash ic are used.

[jeff260z]

Re: Eeprom dump thread!

Post your non-working dump here, I'll fix it for you.

Thanks. I've been trying to read the eeprom but I keep getting all zeros from asprogrammer.

I'm using a CH341A and trying to read the chip while still on the board. I've tried to read the eeprom from two different tv's and am getting zeros every time. I'll keep trying to figure things out.

[Rajnhl]

Re: Eeprom dump thread!

Thanks. I've been trying to read the eeprom but I keep getting all zeros from asprogrammer.

I'm using a CH341A and trying to read the chip while still on the board. I've tried to read the eeprom from two different tv's and am getting zeros every time. I'll keep trying to figure things out.

[ATTACH]256384[/ATTACH]

try with shorting crystal attached to main ic
or programmer is not supplieng enough power to eeprom

[lotas]

Re: Eeprom dump thread!

Thanks. I've been trying to read the eeprom but I keep getting all zeros from asprogrammer.

I'm using a CH341A and trying to read the chip while still on the board. I've tried to read the eeprom from two different tv's and am getting zeros every time. I'll keep trying to figure things out.

[ATTACH]256384[/ATTACH]

It should be like this at the beginning of the dump, unsolder the flash and try to read data from it.