Eeprom dump thread!

[antas]

Re: Eeprom dump thread!

Anyone, can help me with EEPROM, please?
Looking for:
WALKER WPS3219SM
Mainboard: 17MB211S
Chip: Winbond 25Q16JVSIQ
Panel model: VES315WNDB-2D-N21
Thank you in advance...

[yokoono]

Re: Eeprom dump thread!

Try (Toshiba). Main 17MB211S panel VES315WNDB-2D-N21

[antas]

Re: Eeprom dump thread!

Try (Toshiba). Main 17MB211S panel VES315WNDB-2D-N21

Tryied this just now.
Unfortunately, it doesn't work on this model... Thanks for trying to help me...

[yokoono]

Re: Eeprom dump thread!

Try this too. It is for 17MB211S panel VES315WNDS-2D-N21. If the image is returned I have the profile saved for fixing.

[antas]

Re: Eeprom dump thread!

Try this too. It is for 17MB211S panel VES315WNDS-2D-N21. If the image is returned I have the profile saved for fixing.

Not working....

[yokoono]

Re: Eeprom dump thread!

I think there is another problem on the motherboard. Most often problems with dc-dc converters or processor. See also if the flash memory is powered by 3.3v.
What are the symptoms of television?

[antas]

Re: Eeprom dump thread!

I think there is another problem on the motherboard. Most often problems with dc-dc converters or processor. See also if the flash memory is powered by 3.3v.
What are the symptoms of television?

Thanks for coming back to me.
Yes, there are 3.3v on the chip (EEPROM). 12v and 5v are on the board as well.
The red light is on and blinking 2 short times in intervals.
Backlight is working OK.

[yokoono]

Re: Eeprom dump thread!

Don't confuse eeprom memory with flash memory !!!. They are different. See what memory you rewrote. The software is for flash memory, spi.

[antas]

Re: Eeprom dump thread!

Don't confuse eeprom memory with flash memory !!!. They are different. See what memory you rewrote. The software is for flash memory, spi.

Sorry. I rewrote Winbond 25Q16JVSIQ (U135)

[yokoono]

Re: Eeprom dump thread!

How does the defect manifest itself?

[antas]

Re: Eeprom dump thread!

TV not turning ON. When you turn TV ON, RED light up and stay solid. When you push ON button, RED light blinks 2 times and stay solid. Then blinks 2 times again and stay solid. And does this all the time.
PS.: Backlight I checked with the mainboard from Panasonic TV. Backlight working, just can't turn ON the TV.

[yokoono]

Re: Eeprom dump thread!

Heat the processor to 230 degrees for 1 minute and see what it does.
I think the motherboard has a hardware issue not a software one.
You can replace the memory with another new memory.

[antas]

Re: Eeprom dump thread!

Heated for 1 min at 230 degrees. Nothing. Still the same problem...
Do you mean I have to replace Winbond 25Q16JVSIQ with new one?

[yokoono]

Re: Eeprom dump thread!

Try. Rewritten. I have no other ideas.

[antas]

Re: Eeprom dump thread!

Try. Rewritten. I have no other ideas.

Thank you so much for your time, buddy

[jose almeida tavares]

Blaupunkt w40/58j-gb-fhcup-eu memory dump

Hello, i need memory dump for this tv. the mather board t.msd309.8b 10304 and panel lta400hm07. thanks.

[Farasa]

Re: Eeprom dump thread!

hello everyone i just got this set in...37 inch Telefunken chassis... 40-1MS82D....I dont have the panel number...I need the dump for this board....thanks in advance

[Farasa]

Re: Eeprom dump thread!

Anyone at home

[Rajnhl]

Re: Eeprom dump thread!

Anyone at home

try this one

[Farasa]

Re: Eeprom dump thread!

Thanks for this firmware...ill try it and report back