Re: Eeprom dump thread!
i need eeprom file for haier LEC24b3320 main MSAV3226-ZC01-01
thank you
i need eeprom file for haier LEC24b3320 main MSAV3226-ZC01-01
thank you
-
-
le39m7000 dump
try this dumpComment
-
try this dump
le39m7000 dumpComment
-
Re: Eeprom dump thread!
thanksComment
-
Re: Eeprom dump thread!
thanksComment
-
Polaroid 5-50-led-14 eeprom dump
Dump is from Polaroid 5-50-led-14
Main Board: VESTEL 17MB95M
Panel: VES500UNVL-3D-S01
Picture included with full panel info in zip file. Enjoy!
Placement: U10
Chip: 25L1606ELast edited by FoneJackerNI; 02-08-2020, 11:46 AM.Comment
-
Re: Eeprom dump thread!
Hi Everyone,
Does anyone have the dump for a Sony KD49X8305C, screen SYV4941?
IC Winbond 25x40CLNIG
Thank you.Comment
-
Re: Eeprom dump thread!
hi guys im stuck i have a goodmans \cello G55ANSMT-4K CURVE V2 screen is (LSC550FN07-W) and need a dump for it as its stuck in standby i believe its ic u4 correct me if im wrong thanks in advance GARYComment
-
Re: Eeprom dump thread!
Hello , Please share an SPI Flash for LG 32LK450 if you have . Thanks in Advance.Comment
-
Re: Eeprom dump thread!
https: //www.4shared.com/file/tANwfoqjba/tv_lg_32lk450-sa__nand_gil.htmlComment
-
Re: Eeprom dump thread!
Hi All
My friend inserted his mobile into his Sony 60 inch
smarttv..as soon as he did this,the tv froze and
switched off,I think he needs a software update...I'm
lookig for update for
Sony Kd-60x6700e ....
Thanks in advanceComment
-
Re: Eeprom dump thread!
Hi
i have a Blaupunkt 32inch lcd that came to me whit no screen , i have put a new SPI Flash and wen i turn on the first time whit no cables on its ok but wen i turn off the lcd and put the tv cable it does not show image so i have to flash it again , so sometingh is geting the Eprom corrupted .
could some one help me on this one ?
its
TP.MSD309.BP85
B32/147l-GB-5B-HBKUP-EU
Panel: LVW320LGDX E3 V2
THANKSComment
-
Re: Eeprom dump thread!
I need a dump for LT-32EX18 DIGITALPB ASSY GGA10075, the chip is SSTWQ80BLast edited by String2016; 02-18-2020, 04:21 AM.Comment
-
Re: Eeprom dump thread!
Anyone got dump for Sony android tv kdl-55x8509c?Comment
-
Re: Eeprom dump thread!
Hi,
I got a Sharp Model LC-32LE240M that is stuck in BURN MODE. I already programmed the main SPI but still the same. change board from working model same issue.
I suspect a corrupted memory on scaler board MT3151A04-1-XC-9.
I'm requesting for a dump file for this EEPROM.
TIAComment
-
-
Re: Eeprom dump thread!
Check lvds cable first.Hi,
I got a Sharp Model LC-32LE240M that is stuck in BURN MODE. I already programmed the main SPI but still the same. change board from working model same issue.
I suspect a corrupted memory on scaler board MT3151A04-1-XC-9.
I'm requesting for a dump file for this EEPROM.
TIAComment
-
Re: Eeprom dump thread!
SHARP LC-32LE240M-SPI+EEPROMQUOTE=rinedel;943909]https://www.badcaps.net/forum/attach...1&d=1582364951[/QUOTE]Comment
-
Hello, This might be a long shot, but I'm looking for an EEPROM dump for a HP Photosmart C4280 All-in-one printer.
The printer seems to be in cartridge alignment mode. Sometimes it print the alignment page and then hangs during the scanning step, sometimes it hangs during the printing process and sometimes it hangs during the boot process. If I let it idle for a while then it flashes the back-light of the top screen and there's a letter E. Bottom screen is asking me to restart it to no avail. I have to remove the power cable from the printer for a couple of minutes to make it work...02-17-2022, 09:09 PM -
Good day to every one,
I have AVR 171 the IC1504 (24C32) eeprom is corrupted not able to read.
Does anybody have an eeprom dump file? I really appreciate any help.
Thanks in advance.07-01-2024, 09:04 PM -
P14s Gen 2
HT4B0/HP4B0/HT5B1/HT4B2
NM-D352 Rev 1.0
sn PF-35P15W
Requesting thunderbolt dump
also attached is the tbt dump. I extracted the bin from the cap file and modified it, not sure if it's correct. also didnt work.... -
Hi
I was working all day on a 42" with no backlight = Driver is bad . LED Tester. Image exists
As I was reassembling, I discovered faults on the screen ( used the LED Tester to power the strips).
Right distribution board, 2 Flexs, near them:
The one near the center has 1" line on screen. Pressing on the board-side or Panel side of the Flex bonding place results in some change, I sensed heating one time, but main fault line remains
The other, pressing on the Panel to the Chassey and the lines disappears 99.99%
I... -
Comment