The set blink code is 1 short and 3 long. I downloaded the Service manual and that code is not listed. When the set is plugged into AC power the P.S. turns on has 400vdc on filter caps. disconnect PD connector to M.B. P.S. has 169 vdc. Evidently the M.B. sends a on command to P.S.
I believe that the M.B. DKEYMF953FM06 is the problem. Endcompass has it for excess of 300 bucks, they show it compatible with 31 different sets from 60" to 80" sets. I and not sure of Ebay. I have been burnt by them and one supposedly reputable dealers. Before I spend al lot of money. Does anyone know the meaning of the Code 1 short and 3 long led flashes on the front panel?
I believe that the M.B. DKEYMF953FM06 is the problem. Endcompass has it for excess of 300 bucks, they show it compatible with 31 different sets from 60" to 80" sets. I and not sure of Ebay. I have been burnt by them and one supposedly reputable dealers. Before I spend al lot of money. Does anyone know the meaning of the Code 1 short and 3 long led flashes on the front panel?
Comment