PHILIPS 26 PFL3403/10 slow start up

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ReeceyBurger123
    Never Give Up !
    • May 2014
    • 7325
    • Britain

    #21
    Re: PHILIPS 26 PFL3403/10 slow start up

    It is though IMO if I was really an ass hole I would put a bet on it lol
    Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

    https://www.facebook.com/Telford-Tel...7894576335359/

    Comment

    • domix
      Senior Member
      • Jan 2014
      • 159
      • Slovenia

      #22
      Re: PHILIPS 26 PFL3403/10 slow start up

      @ReeceyBurger123 you'we got right, i take it apart and check all these tab bonds and realy the middle one on top was problem, if i press on it tv show image so i fix it with some foam and tape thanks

      Comment

      • budm
        Badcaps Legend
        • Feb 2010
        • 40746
        • USA

        #23
        Re: PHILIPS 26 PFL3403/10 slow start up

        Originally posted by Diah
        the 12 Volts should have 4A, any less than this value it will be delay to start.. and make noise at picture. wasting time and spend penny on caps better than starting with panel which it may broken at any little human mistake.
        BTW, the power supply rating at 12V and can supply the current up to 4A, the loads determine how much current it wants to draw from the power supply, and if the circuits are designed correctly it will be less than 4A to give safety margin.
        If you check the current draw, it will be less than 4A.
        And are you telling us too that 6A will be drawn from the 24V 6A rating power supply?
        Here is the spec of the TV:

        Power
        • Ambient temperature: 5°C to 35°C
        • Mains power: 100-240 V, 50/60 Hz
        Power consumption: 80 W
        • Standby power consumption: <0.3 W

        12V 4A = 48 Watts
        24v 6A = 144 Watts
        So you are saying that it should be consuming 48 Watts of power on the 12V, then the inverter circuit will be only 80W- 48W= 32 Watts?
        Last edited by budm; 03-14-2016, 10:32 AM.
        Never stop learning
        Basic LCD TV and Monitor troubleshooting guides.
        http://www.badcaps.net/forum/showthr...956#post305956

        Voltage Regulator (LDO) testing:
        http://www.badcaps.net/forum/showthr...999#post300999

        Inverter testing using old CFL:
        http://www.badcaps.net/forum/showthr...er+testing+cfl

        Tear down pictures : Hit the ">" Show Albums and stories" on the left side
        http://s807.photobucket.com/user/budm/library/

        TV Factory reset codes listing:
        http://www.badcaps.net/forum/showthread.php?t=24809

        Comment

        • budm
          Badcaps Legend
          • Feb 2010
          • 40746
          • USA

          #24
          Re: PHILIPS 26 PFL3403/10 slow start up

          Originally posted by ReeceyBurger123
          It is though IMO if I was really an ass hole I would put a bet on it lol
          'ReeceyBurger123 i have on hand new nick name for you hahahah ReeceyBurger123PANEL hahahah you are very expensive at repair LOL'
          You would have won big bet from the so called 'PROFESSIONAL TECH'. Who is laughing now?
          How many times now that we were told they are not panel problems?
          Last edited by budm; 03-14-2016, 10:13 AM.
          Never stop learning
          Basic LCD TV and Monitor troubleshooting guides.
          http://www.badcaps.net/forum/showthr...956#post305956

          Voltage Regulator (LDO) testing:
          http://www.badcaps.net/forum/showthr...999#post300999

          Inverter testing using old CFL:
          http://www.badcaps.net/forum/showthr...er+testing+cfl

          Tear down pictures : Hit the ">" Show Albums and stories" on the left side
          http://s807.photobucket.com/user/budm/library/

          TV Factory reset codes listing:
          http://www.badcaps.net/forum/showthread.php?t=24809

          Comment

          • Diah
            Badcaps Legend
            • Feb 2013
            • 6343
            • Germany

            #25
            Re: PHILIPS 26 PFL3403/10 slow start up

            Originally posted by budm
            'ReeceyBurger123 i have on hand new nick name for you hahahah ReeceyBurger123PANEL hahahah you are very expensive at repair LOL'
            You would have won big bet from the so called 'PROFESSIONAL TECH'. Who is laughing now?
            How many times now that we were told they are not panel problems?
            don't put your ass between other talking, when i write to some one you don't have right to make comment or quote it, and from now on don't quote my name any more. end.

            Comment

            • budm
              Badcaps Legend
              • Feb 2010
              • 40746
              • USA

              #26
              Re: PHILIPS 26 PFL3403/10 slow start up

              Originally posted by Diah
              don't put your ass between other talking, when i write to some one you don't have right to make comment or quote it, and from now on don't quote my name any more. end.
              Really? Are you upset because you are so wrong and accused me for trying to sell something that you never apologize?
              'when i write to some one you don't have right to make comment or quote it' I am laughing my ASS OFF right now.
              Why don't you quit crying and learn from mistakes.

              https://www.badcaps.net/forum/showthread.php?t=52734
              https://www.badcaps.net/forum/showthread.php?t=52765
              https://www.badcaps.net/forum/showthread.php?t=52648
              https://www.badcaps.net/forum/showth...t=52876&page=2
              Last edited by budm; 03-14-2016, 02:37 PM.
              Never stop learning
              Basic LCD TV and Monitor troubleshooting guides.
              http://www.badcaps.net/forum/showthr...956#post305956

              Voltage Regulator (LDO) testing:
              http://www.badcaps.net/forum/showthr...999#post300999

              Inverter testing using old CFL:
              http://www.badcaps.net/forum/showthr...er+testing+cfl

              Tear down pictures : Hit the ">" Show Albums and stories" on the left side
              http://s807.photobucket.com/user/budm/library/

              TV Factory reset codes listing:
              http://www.badcaps.net/forum/showthread.php?t=24809

              Comment

              • Diah
                Badcaps Legend
                • Feb 2013
                • 6343
                • Germany

                #27
                Re: PHILIPS 26 PFL3403/10 slow start up

                it seam you are still kids, don't worth any more to comment but at the last one you should know and keep it like ring at your ears .... electronic like ocean and you still swimming at baby beach.

                Comment

                • budm
                  Badcaps Legend
                  • Feb 2010
                  • 40746
                  • USA

                  #28
                  Re: PHILIPS 26 PFL3403/10 slow start up

                  You are just like the banned 'the Greek' that accusing me of being a kid at the key board, LOL, keep that up and keep accusing me with anything you want.
                  What year were you born and how long have you been the 'PROFESSIONAL'?
                  'electronic like ocean and you still swimming at baby beach.' And you are not even in the water yet.

                  https://www.badcaps.net/forum/showth...t=52290&page=2
                  https://www.badcaps.net/forum/showpo...5&postcount=21
                  Last edited by budm; 03-14-2016, 02:34 PM.
                  Never stop learning
                  Basic LCD TV and Monitor troubleshooting guides.
                  http://www.badcaps.net/forum/showthr...956#post305956

                  Voltage Regulator (LDO) testing:
                  http://www.badcaps.net/forum/showthr...999#post300999

                  Inverter testing using old CFL:
                  http://www.badcaps.net/forum/showthr...er+testing+cfl

                  Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                  http://s807.photobucket.com/user/budm/library/

                  TV Factory reset codes listing:
                  http://www.badcaps.net/forum/showthread.php?t=24809

                  Comment

                  • ReeceyBurger123
                    Never Give Up !
                    • May 2014
                    • 7325
                    • Britain

                    #29
                    Re: PHILIPS 26 PFL3403/10 slow start up

                    Well im still a kid lol (only 16) and if I don't say so I know my stuff an example is this thread, anyway lets end this before it gets weirder.....

                    Glad to hear the Tv is fixed
                    Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

                    https://www.facebook.com/Telford-Tel...7894576335359/

                    Comment

                    • Moreno83
                      Badcaps Legend
                      • Jun 2014
                      • 2008
                      • The Netherlands

                      #30
                      Re: PHILIPS 26 PFL3403/10 slow start up

                      Hi reecey ,

                      Was looking at the fault and was about to say "panel fault" but you were first to say haha!
                      Got the same with my Philips in my bedroom ....i just bend the tv and it works. To lazy to get it off the wall
                      I only repair Panasonic plasma tv's! Currently owning a TX-P55VT50 and still searching for a ZT60!

                      Comment

                      • ReeceyBurger123
                        Never Give Up !
                        • May 2014
                        • 7325
                        • Britain

                        #31
                        Re: PHILIPS 26 PFL3403/10 slow start up

                        Originally posted by Moreno83
                        Hi reecey ,

                        Was looking at the fault and was about to say "panel fault" but you were first to say haha!
                        Got the same with my Philips in my bedroom ....i just bend the tv and it works. To lazy to get it off the wall
                        Hi mate, haha yeah sounds like it needs a tab bond fix tbh
                        Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

                        https://www.facebook.com/Telford-Tel...7894576335359/

                        Comment

                        Related Topics

                        Collapse

                        • Cornito
                          Philips 50PUH6400 bad color and gosting / slow motion on one side
                          by Cornito
                          Hello Team,

                          New issue on LCD panel where I need to find out the cause and the potential solution.
                          This is on the Philips 50PUH6400, the LCD panel is an INNOLUX V500dk2 xrs1.

                          I have image, on the right side, the image is more or less normal even if there is a small blur on edge, on the left there is an issue.
                          When moving up and down in the menu on the right the image is slow to disappear, and is darker, like red/brown.

                          I've checked voltages, no issue found comparing right and left side of the panel driver.
                          VHG VGL CKV... are the sames on...
                          03-08-2024, 06:41 AM
                        • gjlpereira
                          MacBook Pro A1708 - CPU extremely slow, locked @ 0.39ghz; fan full speed
                          by gjlpereira
                          Hi forum.

                          I'm working on a macbook pro, model a1708, that is running extremely slow.

                          Everything on it seams to work just fine, it just works extremely slow; painfully slow; especially running macos (windows and linux actually run OKish on it, slow, but usable).
                          One other symptom of the problem with the machine is that the fan is always running at full speed.

                          This machine has been worked on by someone else previously; they tried to repair it, but with no success. The motherboard does have sings of being worked on, but it all looks good/OK; like...
                          09-06-2022, 07:45 PM
                        • aidanmo
                          Philips 43PUS7506/12 - Loud blown out sound
                          by aidanmo
                          Hello,

                          I've got a really strange issue with the speakers on my Philips 43PUS7506/12. It makes this awful loud buzzing now. It happened after it was attempted to be wall mounted - I think the back got squeezed and something broke.
                          I thought maybe the speakers got damaged, so I replaced them - no dice.
                          • Using the internal speakers, it always happens.
                          • Using the headphone jack, it never happens.
                          • Using the digital/optical out with a soundbar - it happens after about 2h/movie runtime - it's never as drastic, it just pops in and out, but I didn't want it to damage the sound bar
                          ...
                          02-28-2025, 03:13 PM
                        • nissimezra
                          HP Notebook 15-dy1731ms VERY SLOW
                          by nissimezra
                          Hi to everyone.

                          I never seen something like this. I have HP Notebook 15-dy1731ms motherboard: DA0P5DMB8CO REV C that is very very slow. I tried all the basic, updating the bios, replacing ssd, replacing ram, soldering all coils, reflow CPU power supply but the laptop is still very very slow. Never seen a motherboard that is slow. CPU power suppliers 1.8 volts, the cpu barely getting hot.

                          What left for me to do is reflow the CPU and try manually programing the bios chip with programer.

                          Anyone have any idea what it can be?
                          04-13-2023, 02:45 PM
                        • EthanMai
                          DELL PRECISION 3440 SFF X4N41 10th ST-3L0GZB3 25Q256 Slow startup, needs cleaning.
                          by EthanMai
                          DELL PRECISION 3440 SFF X4N41 10th 25Q256 Slow startup

                          ST-3L0GZB3

                          needs cleaning.

                          Please help me clean up the slow startup dump if you have time. Thank you....
                          07-05-2024, 11:43 AM
                        • Loading...
                        • No more items.
                        Working...