PHILIPS 26 PFL3403/10 slow start up

[ReeceyBurger123]

Re: PHILIPS 26 PFL3403/10 slow start up

Hi reecey ,

Was looking at the fault and was about to say "panel fault" but you were first to say haha!
Got the same with my Philips in my bedroom ....i just bend the tv and it works. To lazy to get it off the wall

Hi mate, haha yeah sounds like it needs a tab bond fix tbh

[Moreno83]

Re: PHILIPS 26 PFL3403/10 slow start up

Hi reecey ,

Was looking at the fault and was about to say "panel fault" but you were first to say haha!
Got the same with my Philips in my bedroom ....i just bend the tv and it works. To lazy to get it off the wall

[ReeceyBurger123]

Re: PHILIPS 26 PFL3403/10 slow start up

Well im still a kid lol (only 16) and if I don't say so I know my stuff an example is this thread, anyway lets end this before it gets weirder.....

Glad to hear the Tv is fixed

[budm]

Re: PHILIPS 26 PFL3403/10 slow start up

You are just like the banned 'the Greek' that accusing me of being a kid at the key board, LOL, keep that up and keep accusing me with anything you want.
What year were you born and how long have you been the 'PROFESSIONAL'?
'electronic like ocean and you still swimming at baby beach.' And you are not even in the water yet.

https://www.badcaps.net/forum/showth...t=52290&page=2
https://www.badcaps.net/forum/showpo...5&postcount=21

[Diah]

Re: PHILIPS 26 PFL3403/10 slow start up

it seam you are still kids, don't worth any more to comment but at the last one you should know and keep it like ring at your ears .... electronic like ocean and you still swimming at baby beach.

[budm]

Re: PHILIPS 26 PFL3403/10 slow start up

don't put your ass between other talking, when i write to some one you don't have right to make comment or quote it, and from now on don't quote my name any more. end.

Really? Are you upset because you are so wrong and accused me for trying to sell something that you never apologize?
'when i write to some one you don't have right to make comment or quote it' I am laughing my ASS OFF right now.
Why don't you quit crying and learn from mistakes.

https://www.badcaps.net/forum/showthread.php?t=52734
https://www.badcaps.net/forum/showthread.php?t=52765
https://www.badcaps.net/forum/showthread.php?t=52648
https://www.badcaps.net/forum/showth...t=52876&page=2

[Diah]

Re: PHILIPS 26 PFL3403/10 slow start up

'ReeceyBurger123 i have on hand new nick name for you hahahah ReeceyBurger123PANEL hahahah you are very expensive at repair LOL'
You would have won big bet from the so called 'PROFESSIONAL TECH'. Who is laughing now?
How many times now that we were told they are not panel problems?

don't put your ass between other talking, when i write to some one you don't have right to make comment or quote it, and from now on don't quote my name any more. end.

[budm]

Re: PHILIPS 26 PFL3403/10 slow start up

It is though IMO if I was really an ass hole I would put a bet on it lol

'ReeceyBurger123 i have on hand new nick name for you hahahah ReeceyBurger123PANEL hahahah you are very expensive at repair LOL'
You would have won big bet from the so called 'PROFESSIONAL TECH'. Who is laughing now?
How many times now that we were told they are not panel problems?

[budm]

Re: PHILIPS 26 PFL3403/10 slow start up

the 12 Volts should have 4A, any less than this value it will be delay to start.. and make noise at picture. wasting time and spend penny on caps better than starting with panel which it may broken at any little human mistake.

BTW, the power supply rating at 12V and can supply the current up to 4A, the loads determine how much current it wants to draw from the power supply, and if the circuits are designed correctly it will be less than 4A to give safety margin.
If you check the current draw, it will be less than 4A.
And are you telling us too that 6A will be drawn from the 24V 6A rating power supply?
Here is the spec of the TV:

Power
• Ambient temperature: 5°C to 35°C
• Mains power: 100-240 V, 50/60 Hz
• Power consumption: 80 W
• Standby power consumption: <0.3 W

12V 4A = 48 Watts
24v 6A = 144 Watts
So you are saying that it should be consuming 48 Watts of power on the 12V, then the inverter circuit will be only 80W- 48W= 32 Watts?

[domix]

Re: PHILIPS 26 PFL3403/10 slow start up

@ReeceyBurger123 you'we got right, i take it apart and check all these tab bonds and realy the middle one on top was problem, if i press on it tv show image so i fix it with some foam and tape thanks

[ReeceyBurger123]

Re: PHILIPS 26 PFL3403/10 slow start up

It is though IMO if I was really an ass hole I would put a bet on it lol

[Diah]

Re: PHILIPS 26 PFL3403/10 slow start up

Its alrigigh

ReeceyBurger123 i have on hand new nick name for you hahahah ReeceyBurger123PANEL hahahah you are very expensive at repair LOL

[ReeceyBurger123]

Re: PHILIPS 26 PFL3403/10 slow start up

Its alright Diah is always correct no one else's EXPERIENCED view matters

[Diah]

Re: PHILIPS 26 PFL3403/10 slow start up

the 12 Volts should have 4A, any less than this value it will be delay to start.. and make noise at picture. wasting time and spend penny on caps better than starting with panel which it may broken at any little human mistake.

[Nick's Tvs]

Re: PHILIPS 26 PFL3403/10 slow start up

Domix,

Very easy way to figure this out, if you have checked ReeceyBurger123's youtube video at all, you will notice that he twists/bends the frame of the set a bit to cause small movements on the screen and frame. This causes the issue to either appear and or disappear dependent on how you move and twist the tv. Give that a try, if you can't get the issue to go away by doing that within the first 10 minutes and or make it reappear after 10 minutes of the screen being on, then go ahead and mess around with the power supply, but it is a very easy check and won't take more than a few minutes to try.

Good luck

[ReeceyBurger123]

Re: PHILIPS 26 PFL3403/10 slow start up

So then its a panel fault, panel fault can take ages to get working then it will work fine. But fine if you dont want to listen go ahead and waste your time checking voltages.

[domix]

Re: PHILIPS 26 PFL3403/10 slow start up

No it not panel fault, i place tv on stand and plug it in then need 10 min to scow picture, than can i turn on and off how many imes i want and it work, but if i plug the cable out and leave one time and than plug in back then need again 10 minutes to turn on

[ReeceyBurger123]

Re: PHILIPS 26 PFL3403/10 slow start up

Link to video on repair:

https://m.youtube.com/watch?v=mMo3NBGLwH0

[ReeceyBurger123]

Re: PHILIPS 26 PFL3403/10 slow start up

Right knew it, panel fault. I will link a video to the repair of the panel.

[domix]

Re: PHILIPS 26 PFL3403/10 slow start up

Guys please ! This is a panel fault, what screen is used ? Guessing a V260B1 from Cmo ?

yes, exactly this one