Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]

Announcement

Collapse
No announcement yet.

User Profile

Collapse

Profile Sidebar

Collapse
Avatar
janos6662000
New Member
Last Activity: 01-30-2024, 05:26 PM
Joined: 03-06-2015
Location: Mures
  •  
  • Filter
  • Time
  • Show
  • Source
Clear All
new posts

  • janos6662000
    commented on 's reply to Lenovo g50-45 bios
    Hi!

    Your procedure saved this laptop, it works now!
    First i want to say, that of course i checked the screen with flashlight and there was no info on it. I also checked with external monitor on both VGA and HDMI outputs.
    When i said "some kind of reset", i meant that from an angle the black looked different when it was off or on.
    Now, the solution. CMOS recovery worked OK, but with a catch.
    On a Russian forum i saw that someone succeeded after pressing the Fn + R keys.
    I tried that and bingo! Beeps, etc and in a few minutes i got my laptop...
    See more | Go to post

  • janos6662000
    replied to Lenovo g50-45 bios
    Hi!

    I know it is an old thread, but i have the same problem and maybe i'm in luck.
    So... I have a Lenovo G50-45 with AMD A8-6410 CPU and Radeon R5 graphics.
    The laptop is turning on, power led goes on but the screen is black. From an angle, i can see some kind of reset on the screen when i power it on, but no backlight or any info.
    I can turn off the laptop with a long press, but it turns of and restarts after 25 seconds. Fan does not spin, but USB ports are powered also.
    To me it seems a corrupt BIOS, i would reprogram it, but my hot air soldering station...
    See more | Go to post
    Last edited by SMDFlea; 12-17-2023, 04:30 PM.

    Leave a comment:


  • Re: Sony KDL-48R550C, need comments is it Panel FAILURE?

    Hi all!
    I know this is an old topic but i have exactly the same problem.
    Here's what i tried:
    USB blind upgrade. I succeeded but still no joy.
    I cut MON_R and MON_L as in the video. No picture....
    I have the following voltages:
    VIN_12V 12.4V
    VCC_3.3V 3.3V
    VCC_1.8V 1.8V
    VCC_1.2V 1.2V
    The secondary voltages are all missing. I can see a small spike when the backlight starts, but other than that, only a few mV stay there.
    On the following lines i don't have voltage:...
    See more | Go to post

    Leave a comment:

No activity results to display
Show More
Working...
X