Sharp aquos LC-40LE810E

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Nightmare0
    Member
    • Oct 2015
    • 39
    • Slovakia

    #81
    Re: Sharp aquos LC-40LE810E

    1-2: 1,01v
    3-4: 0,25v

    Comment

    • budm
      Badcaps Legend
      • Feb 2010
      • 40746
      • USA

      #82
      Re: Sharp aquos LC-40LE810E

      Originally posted by Nightmare0
      1-2: 1,01v
      3-4: 0,25v
      That is what I expect, the OPTO should be on when AC is normal so the LED inside the Opto is turned on, as you can see the Vf of the LED is 1.01VDC (per spec of the OPTO, the typical Vf is 1.2V), so when the LED inside the OPTO is on the Photo-transistor is also truned on that is why the Vce (pin 3-Emitter and pin 4-Collector) is low, the transistor is in saturated condition (per spec the typical Vsat is 0.1V, MAX IS 0.2).
      So when you add that 68K Ohms resistor the LED will have more forward current (If) so the Photo-transistor is turned on more (it has to do with Current Transfer Function (between 50%~600%) of the Opto).
      The reason I ask about the VCC Voltage at those two points is to find out if it is too low, and the OPTO may be operating at marginal point already so it does not take much for it not to be fully on.
      The output of the OPTO is used to drive the switched transistor Q7061, IC7061 that control PD-PIN 9 (AC-DET) to make it HI or LO depends on the AC Voltage level.
      So you can leave it like that with that added resistor.
      Last edited by budm; 10-13-2015, 11:12 PM.
      Never stop learning
      Basic LCD TV and Monitor troubleshooting guides.
      http://www.badcaps.net/forum/showthr...956#post305956

      Voltage Regulator (LDO) testing:
      http://www.badcaps.net/forum/showthr...999#post300999

      Inverter testing using old CFL:
      http://www.badcaps.net/forum/showthr...er+testing+cfl

      Tear down pictures : Hit the ">" Show Albums and stories" on the left side
      http://s807.photobucket.com/user/budm/library/

      TV Factory reset codes listing:
      http://www.badcaps.net/forum/showthread.php?t=24809

      Comment

      • Nightmare0
        Member
        • Oct 2015
        • 39
        • Slovakia

        #83
        Re: Sharp aquos LC-40LE810E

        Thank you very much. Now I will put tv together and test it. Sorry for my mistakes. You managed to help me even my lack of electrician knowledge and not perfect English. This experience made me to learn a lot of interesting stuff. I hope this thread can help someone in future. I can see, there is donate button on the bottom. If I donate, will you get something?
        Co-worker said, he also has some broken tv in basement. Maybe I will make another thread to help him. But first I will give you some rest :-) it had to be exhausting to work with me. Thank you again and provide me some information, where can I donate.

        Comment

        • rievax_60
          Badcaps Veteran
          • May 2012
          • 897
          • australia

          #84
          Re: Sharp aquos LC-40LE810E

          Keep in mind the back light flickering fault that can develop that is mentioned in the other thread.

          Comment

          • budm
            Badcaps Legend
            • Feb 2010
            • 40746
            • USA

            #85
            Re: Sharp aquos LC-40LE810E

            You should also turn down the Backlights level down as low as possible but still have good pictures in the user setup menu, this will help extending the LEDs' life, they will run cooler.
            Never stop learning
            Basic LCD TV and Monitor troubleshooting guides.
            http://www.badcaps.net/forum/showthr...956#post305956

            Voltage Regulator (LDO) testing:
            http://www.badcaps.net/forum/showthr...999#post300999

            Inverter testing using old CFL:
            http://www.badcaps.net/forum/showthr...er+testing+cfl

            Tear down pictures : Hit the ">" Show Albums and stories" on the left side
            http://s807.photobucket.com/user/budm/library/

            TV Factory reset codes listing:
            http://www.badcaps.net/forum/showthread.php?t=24809

            Comment

            • Nightmare0
              Member
              • Oct 2015
              • 39
              • Slovakia

              #86
              Re: Sharp aquos LC-40LE810E

              But that user fixed it by replacing all optos, didn't he? I am going to keep this tv in my bedroom. I am not.going to profit on this tv with questionable life span.

              Comment

              • rievax_60
                Badcaps Veteran
                • May 2012
                • 897
                • australia

                #87
                Re: Sharp aquos LC-40LE810E

                Originally posted by budm
                You should also turn down the Backlights level down as low as possible but still have good pictures in the user setup menu, this will help extending the LEDs' life, they will run cooler.
                Good advice. Turn the back light down and also contrast up, but avoiding white crush. This setting combination gives the TV the longest life and better black level.
                Actually it was the lower back light setting that showed up the flickering problem on the Sharp TV that I fixed.

                Comment

                • budm
                  Badcaps Legend
                  • Feb 2010
                  • 40746
                  • USA

                  #88
                  Re: Sharp aquos LC-40LE810E

                  That is for tonight folk, on to the next project, cheers.
                  Never stop learning
                  Basic LCD TV and Monitor troubleshooting guides.
                  http://www.badcaps.net/forum/showthr...956#post305956

                  Voltage Regulator (LDO) testing:
                  http://www.badcaps.net/forum/showthr...999#post300999

                  Inverter testing using old CFL:
                  http://www.badcaps.net/forum/showthr...er+testing+cfl

                  Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                  http://s807.photobucket.com/user/budm/library/

                  TV Factory reset codes listing:
                  http://www.badcaps.net/forum/showthread.php?t=24809

                  Comment

                  • rievax_60
                    Badcaps Veteran
                    • May 2012
                    • 897
                    • australia

                    #89
                    Re: Sharp aquos LC-40LE810E

                    Originally posted by Nightmare0
                    But that user fixed it by replacing all optos, didn't he? I am going to keep this tv in my bedroom. I am not.going to profit on this tv with questionable life span.
                    The flickering problem was caused by the opto further up on the board, the one on its own. Dont worry about it. It may never fault.
                    Last edited by rievax_60; 10-13-2015, 11:55 PM.

                    Comment

                    • Nightmare0
                      Member
                      • Oct 2015
                      • 39
                      • Slovakia

                      #90
                      Re: Sharp aquos LC-40LE810E

                      Ok then. And what about that donate?

                      Comment

                      • rievax_60
                        Badcaps Veteran
                        • May 2012
                        • 897
                        • australia

                        #91
                        Re: Sharp aquos LC-40LE810E

                        There is a yellow Donate button at the very bottom of this page.

                        Comment

                        • Nightmare0
                          Member
                          • Oct 2015
                          • 39
                          • Slovakia

                          #92
                          Re: Sharp aquos LC-40LE810E

                          I know. I was asking, if you both will get something of that :-)

                          Comment

                          • rievax_60
                            Badcaps Veteran
                            • May 2012
                            • 897
                            • australia

                            #93
                            Re: Sharp aquos LC-40LE810E

                            I suspect that most members are happy enough to help, so long as it doesn't become too frustrating.
                            If you want to donate, it should be to this forum which enables members to help each other.

                            Comment

                            • Nightmare0
                              Member
                              • Oct 2015
                              • 39
                              • Slovakia

                              #94
                              Re: Sharp aquos LC-40LE810E

                              I just wanted to donate straight to you. Anyways I will donate at least to this site. Thank you

                              Comment

                              • angel-boy
                                Badcaps Veteran
                                • Jan 2013
                                • 550
                                • Romania

                                #95
                                Re: Sharp aquos LC-40LE810E

                                hy , i have the same problem
                                and I took out pin 9 - AC-DET an just plugged it next to pin 11 - 5v , the tv power on now,

                                so the next step will be to change 68k smd resistor and also 33k and 4 opto-couplers ?

                                Comment

                                • rievax_60
                                  Badcaps Veteran
                                  • May 2012
                                  • 897
                                  • australia

                                  #96
                                  Re: Sharp aquos LC-40LE810E

                                  The previous posts don't say exactly that. The safest and most direct action is to add a 68K on top of R7019. It is next to Q7802. Look at post 79.

                                  Comment

                                  • angel-boy
                                    Badcaps Veteran
                                    • Jan 2013
                                    • 550
                                    • Romania

                                    #97
                                    Re: Sharp aquos LC-40LE810E

                                    I fix the tv , teste first time with pin 9 , plugged in pin 11, and replace R7019 with 34k resistor , and finish , tv works great

                                    Comment

                                    • sathishbds
                                      New Member
                                      • Jan 2018
                                      • 1
                                      • Australia

                                      #98
                                      Re: Sharp aquos LC-40LE810E

                                      Is there the pins (9/AC_DET) of P9601 at “H”?

                                      what is mean by "H" here?? Can i anyone tell me. Thanks in advance.

                                      Comment

                                      • budm
                                        Badcaps Legend
                                        • Feb 2010
                                        • 40746
                                        • USA

                                        #99
                                        Re: Sharp aquos LC-40LE810E

                                        Normal condition AC-DET = H (HIGH) = >2.5V, typical for this board is around 3~3.5VDC range, L (LO) = <1V for fault condition.
                                        AC-DET signal tells the main board if the incoming AC is within the operating range of the power supply or not.
                                        Never stop learning
                                        Basic LCD TV and Monitor troubleshooting guides.
                                        http://www.badcaps.net/forum/showthr...956#post305956

                                        Voltage Regulator (LDO) testing:
                                        http://www.badcaps.net/forum/showthr...999#post300999

                                        Inverter testing using old CFL:
                                        http://www.badcaps.net/forum/showthr...er+testing+cfl

                                        Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                                        http://s807.photobucket.com/user/budm/library/

                                        TV Factory reset codes listing:
                                        http://www.badcaps.net/forum/showthread.php?t=24809

                                        Comment

                                        • meme123
                                          New Member
                                          • Dec 2017
                                          • 5
                                          • palstinia

                                          #100
                                          Re: Sharp aquos LC-40LE810E

                                          Hi, I'm a Sharp Acua lc 810 with a fault similar to the holidays but the flash is frequent and does not stop please help outside flute 5 v only

                                          Comment

                                          Related Topics

                                          Collapse

                                          • scubacamper
                                            Sharp Aquos LC-70C6400U Half Screen Dark
                                            by scubacamper
                                            I found another post on this site the other day which has been very helpful in troubleshooting this issue I am having with my tv. The left half of the screen is dark, and the other half is VERY slow to generate it's image - and it only generates part of its image at that.
                                            Based on this yt video, I have narrowed it down to an issue (short?) on the left side of the display, somewhere in the system of ribbon cables.
                                            when I remove the bezel and the rear cover, I can get the image to display correctly by manipulating the ribbon cables on the left side which connects the left lower display...
                                            05-03-2025, 12:19 PM
                                          • sefoster
                                            Sharp Aquos Lc-80LE757U flashing Sharp on screen when plugged in
                                            by sefoster
                                            I have a Sharp Aquos LC-80LE757U that randomly made a loud popping noise when when watching TV one day. We found that the fuse blew and the thermistor. We ended up replacing the entire power supply board and have also replaced the TCON board. Now as soon as I plug the TV in it lights up and has the Sharp logo flashing on and off of the screen. If I unplug the ribbon cable from the TCON board to the main board I get the 2 long 5 short error code. Any ideas on where to go from here? We've tried resetting it but nothing has worked. If we plug it in and let it cycle through the flashing of the Sharp...
                                            11-20-2022, 09:29 AM
                                          • foxyUK
                                            Sharp Aquos LC-32LE600E, No 12v as no PNL_POW
                                            by foxyUK
                                            Can anyone help me diagnose this? Almost not worth bothering with, but it has 'sentimental value' for the owner. I'm no TV technician, but dabble a bit.
                                            The TV has standby power but no reaction at all to switching on or reboot steps, No flashing lights or response to menu button. All voltages on the power board are correct apart from missing voltage on pin 12 of CN7003.
                                            There is 13 v on U7053 but no 3v signal to switch it on. I don't really understand whether the 3v should come from U7401 in the standby control area, or (as suggested elsewhere) from the mainboard via pin 12....
                                            10-22-2024, 10:27 AM
                                          • thesharpfella
                                            Is this white-washed screen caused by a faulty T-Con board or panel? Sharp Aquos c70le735x
                                            by thesharpfella
                                            Hello esteemed gentlemen. I have owned this LCD TV since 2012. The only repair was the replacement of the PSU a few years ago. Apart from that, no issues. Recently, all was working fine until I switched on to see it appear as so. The day before it was working fine. There is sound. Could this be a T-Con board issue? If not, what could it be? Thank you.

                                            ...
                                            07-23-2024, 10:37 AM
                                          • olegeisler
                                            SHARP AQUOS LC-70LE836S only blinking - freebie
                                            by olegeisler
                                            Got this SHARP AQUOS LC-70LE836S for free - did some basic troubleshooting, and found manual - without detail schematics though. Comes from a meeting room with extremely few working hours.

                                            Symptoms :

                                            When connected to mains, the logo blinks continously, approx 6 times per 10 seconds.

                                            A press on MENU as per the manual changes this to one short blink, one long and then repeats.

                                            Only 5V ( Standby ) on PSU module present, no AC_DETECT, no 12V, no 13V, no PS_ON from mainboard.

                                            As I see it mainboard has some kind of life, but does not...
                                            07-23-2022, 07:01 AM
                                          • Loading...
                                          • No more items.
                                          Working...