Emerson lc320em8a inverter transformer

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • Herbssat
    Senior Member
    • Sep 2011
    • 194
    #21
    Re: Emerson lc320em8a inverter transformer

    Changed all 6 inverter transformers and now the set works fine. Evidently the ring tester could not find the problem child transformer. Thanks for all the responses.

      Comment

      • budm
        Badcaps Legend
        • Feb 2010
        • 40746
        • USA
        #22
        Re: Emerson lc320em8a inverter transformer

        What kind of ringer did you get? The transformers all show the same result?
        Never stop learning
        Basic LCD TV and Monitor troubleshooting guides.
        http://www.badcaps.net/forum/showthr...956#post305956

        Voltage Regulator (LDO) testing:
        http://www.badcaps.net/forum/showthr...999#post300999

        Inverter testing using old CFL:
        http://www.badcaps.net/forum/showthr...er+testing+cfl

        Tear down pictures : Hit the ">" Show Albums and stories" on the left side
        http://s807.photobucket.com/user/budm/library/

        TV Factory reset codes listing:
        http://www.badcaps.net/forum/showthread.php?t=24809

          Comment

          • Herbssat
            Senior Member
            • Sep 2011
            • 194
            #23
            Re: Emerson lc320em8a inverter transformer

            Hey Budm. I used the blue ring tester with the same result on each transformer.

              Comment

              • Herbssat
                Senior Member
                • Sep 2011
                • 194
                #24
                Re: Emerson lc320em8a inverter transformer

                Here is a picture of the results.
                Attached Files

                if you find these attachements useful please consider making a small donation to the site

                  Comment

                  • CapLeaker
                    Leaking Member
                    • Dec 2014
                    • 8352
                    • Canada
                    #25
                    Re: Emerson lc320em8a inverter transformer

                    Good to read that you are back up and running though and thanks for the feedback!

                      Comment

                      • Herbssat
                        Senior Member
                        • Sep 2011
                        • 194
                        #26
                        Re: Emerson lc320em8a inverter transformer

                        The set has reverted back to its old ways according to the customer. I picked it up and have been watching it since 8 am this morning. It has not acted up yet. This is going to be a dog to trace. Definitely need more suggestions on this one. Thanks.

                          Comment

                          Previous 1 2 template Next

                          Related Topics

                          Collapse
                          • littlejohn
                            Emerson clock radio transformer
                            by littlejohn
                            Hello I have a Emerson research clock radio model CKS3516C and the transformer went out on it ,the label on the clock radio says 120VAC 6 watt backup battery DC 3v CR2430. the numbers on the transformer ST3591C-13SEN which I can't find anywhere for it. Can anyone please tell me the AC output voltage. Thanks
                            08-30-2023, 07:13 PM
                          • eccerr0r
                            inverter H tree driver imbalance in an AC inverter
                            by eccerr0r
                            My cheap crappy 1KW grid tie inverter (GTI) seems to keep blowing IGBTs. When I first got it, it had two failed IGBTs. It used four 60N100's (TO264). I bought 5 from a dubious source (fleabay) and replaced just the two that were dead. The GTI worked for almost two years but recently one of the two that I replaced failed. Since I had three spares, I replaced the dead one. Then a few weeks later it failed again. Weird. Well since I bought dubious China-sourced IGBTs from fleabay it could very well just be a mixture of fakes. I replaced it, but then a day later it failed again! I put in the last...
                            11-16-2025, 12:34 PM
                          • ohren
                            Original Xbox 1.0 PSU: Foxlink FTPS-0002 Rev. B. — 12 V low, 5 V high — transformer?
                            by ohren
                            Hello!

                            I'm looking at an original Xbox PSU: Foxlink ftps-0002 rev. B. The 12 V output is too low, and the 5 V output is too (?) high. Unfortunately I don't have an oscilloscope but only a DMM for diagnosis.

                            Measured voltages with no load:

                            After rectifier diodes
                            12V: 6.17 V
                            5V: 5.67 V

                            Secondary transformer pins AC measurement (really don't know if this says anything)
                            12V: 2-2.5 V
                            5V: 1.04 V


                            I also have another (working) Xbox psu from Delta. The same measures there, in order, being: 10.79,...
                            03-18-2023, 10:33 AM
                          • x_orange90_x
                            Vizio E55-E1 bad backlights or bad inverter?
                            by x_orange90_x
                            I just got this tv today and it appeared to have no backlight on. After taking off the rear cover and checking again in the dark I can see that MAYBE one quadrant is lit.. But still it's quite dim. I was going to check the LEDs with my tester, and I found LED 1 and LED 2 + pins on the wire from the inverter, but I couldn't identify a ground. Nonetheless I tried using a mounting screw on the inverter board and also the chassis as ground but regardless my tester reads 300 which is what it reads when there is no voltage draw.

                            I don't know how exactly to test the inverter itself. Is it...
                            01-29-2025, 09:24 PM
                          • dennis_elx33
                            3PHASE STEP-DOWN Transformer in Check
                            by dennis_elx33
                            Hello All,

                            i would like to post an interesting topic regarding 3-phase stepdown transformer which we suspect to cause an overcurrent (138A) which resulted to power tripped off of the HV power supply (80KV output).


                            Problem statement: Power tripped Off

                            Initial Problem: Found 2 IGBT and 2 rectifier diodes shorted (burnt).

                            Action Done:
                            1) Replaced the faulty parts with good spare.
                            2) Measured impedance of the 3phase input lines and found that L2 to L3 has 23.3ohm while other pairs are 51Kohm. This pins will...
                            12-02-2024, 06:52 AM
                          • Loading...
                          • No more items.
                          Working...