-
-
Re: MS Surface no touchscreen after cleaning ME Firmware **FIX**
the model is a surface 6 pro 1796. I have to desolder the BIOS chip, right?
I have tried to boot from a USB efi Shell + ru.efi. It turns on correctly, but I don't know how to use it.
is it impossible to get a dump from there?
I'm sorry if my questions are silly, I'm still learning on this subject.Comment
-
Re: MS Surface no touchscreen after cleaning ME Firmware **FIX**
You will have to use an SPI programmer.If the chip is a WSON type (no legs on the chip,soldered flat) you will need to desolder it and use a WSON adapter board,or use a WSON8 pogo adapter
https://www.badcaps.net/forum/showth...ght=WSON8+pogo
https://www.aliexpress.com/item/1005001830846980.html
https://www.badcaps.net/forum/showpo...40&postcount=2
.Last edited by SMDFlea; 04-16-2022, 07:23 AM.Comment
-
Re: MS Surface no touchscreen after cleaning ME Firmware **FIX**
wow thank you very much, I hadn't seen that you answered.
I continue studying, researching and going crazy, looking on the internet, some solution so as not to have to desolder hahaha
But I think your solution is the most "easy", although it scares me.
Using the aliexpress adapter is another good option!
Question from Noob, from the "Ru.exe, Ru.EFI", could not modify the values?
Thank you very much again.
Last edited by Penetre; 04-21-2022, 09:06 AM.Comment
-
Re: MS Surface no touchscreen after cleaning ME Firmware **FIX**
please tell me where you get the ISH Firmware file from, if not, you can't build the fileComment
-
Comment
-
Re: MS Surface no touchscreen after cleaning ME Firmware **FIX**
Which file in pro 7 needs to be changed for me region cleaning?Attached FilesLast edited by ahmypc; 05-15-2022, 03:57 PM.Comment
-
-
Re: MS Surface no touchscreen after cleaning ME Firmware **FIX**
ME Sub Partition.bin .It is the ME firmware.The new PRD_RGN firmware from the repository must be renamed to: ME Sub Partition.bin .If you can`t find the same PRD_RGN version use the nearest older or newer one.
Follow the win-raid guide "D4. CSME 11 - 15 & CSTXE 3 - 4"
https://winraid.level1techs.com/t/gu...zation/31277/2Comment
-
Re: MS Surface no touchscreen after cleaning ME Firmware **FIX**
So what if i don't have oryginal bios for Surface 5 PRO.
I have ISHC Valid = True but the touch screen not working.
How to Fix this ?? Or this is not possible if I don't have original bios
Attached FilesComment
-
-
Re: MS Surface no touchscreen after cleaning ME Firmware **FIX**
Have you installed all updates and drivers from microsoft. Make a bios backup and open it with FIT version 11 ,the ISH settings should be set the same as they are in the 1st picture (left side) at post #1
.Last edited by SMDFlea; 05-20-2022, 10:38 AM.Comment
-
Re: MS Surface no touchscreen after cleaning ME Firmware **FIX**
Yes i have installed all driver. I try this on W10 and W11 and is same result. On bios in FIT is GOOD but touchscreen not working.Comment
-
Re: MS Surface no touchscreen after cleaning ME Firmware **FIX**
awosome man!Comment
-
Re: MS Surface no touchscreen after cleaning ME Firmware **FIX**
Bro,my surface pro4 touch no woring because of bios,but the original bios was lost,can i use this method to repair it?Comment
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Re: MS Surface no touchscreen after cleaning ME Firmware **FIX**
How to open the file (bios bin file)
???Attached FilesComment
-
-
Re: MS Surface no touchscreen after cleaning ME Firmware **FIX**
Your ME firmware is corrupted.Cleaning the ME firmware might fix it, if it will open with FIT.Post your bios in one of the same model thread topics if you can`t clean the ME yourself.
Here`s the ME cleaning guides https://www.badcaps.net/forum/showpo...41&postcount=3Comment
-
Re: MS Surface no touchscreen after cleaning ME Firmware **FIX**
Good afternoon, I have a Surface Pro 4 with the Touch not working and the error in the device listing, for the solution according to the procedure described above would I have to access the BIOS memory physically or would there be some software to be used?Comment
-
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Mọi khoản quyên góp cho Badcaps đều được hoan nghênh . Trở thành người ủng hộ Badcaps >>>>> nhấp vào liên kết này để quyên góp <<<<< Cảm ơn tất cả những người ủng hộ . -------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
Re: MS Surface no touchscreen after cleaning ME Firmware **FIX**
Hello I am working on a Microsoft Surface Pro 6, M1086841-003
and I have no touch screen, I have been following this guide and I think
I get what to do I am just having problems picking what file to use
I have ME Version 11.7.4.3330
There are two files in, CSME 11.7 Repository r10, what one do I use
11.7.4.3330_CON_H_DA_PRD_RGN
11.7.4.3330_CON_LP_C_NPDM_PRD_RGN
Any help picking a file please, How do I know what one?. Thanks.Comment
-
Hello everyone,
I'm working on an Asus TUF Gaming H670-Pro motherboard and need help finding a firmware dump for the MX25VB8035F (1MB) SPI flash chip.
What Happened:
I mistakenly removed and erased this 1MB chip, thinking it was part of the main BIOS.- I later found that the board has two main BIOS chips (8MB + 16MB), which I have backups for.
- My backup for the MX25VB8035F chip is just an empty 1MB segment filled with FFs, meaning I have no valid data to restore.
- A firmware dump for the MX25VB8035F chip from the same motherboard (or a compatible
-
Hello guys i really need help, i recently updated my DS-7208HGHI-K1 and it somehow got bricked, I've got it up and working now by flashing a new dump file i found but the serial number is really wrong and the uploader of the dump file probably intentionally did it.
I still have the bricked dump file is it possible to transfer the serial number of the "bricked dump" to the "working dump"? -
Got a new victim:
AcuRite 5 in 1 Iris outdoor weather station not updating the temperature / humidity anymore. The original sensor is a SHT21. Also there are identical other sensor manufacturers. I chose the HTU21D to replace the original SHT21. Both have identical specs. I've had two failure modes with these sensors.
A: outside temp stuck at -40?
It's cold here at times in Canada, but not that cold!
B: stuck at some temperature and maybe updating once in 12 hrs or so.
Easy solution is to go to AcuRite website and purchase the sensor. Right?...
-
Here`s a quick ME Firmware cleaning guide.
The guide is basic,its main goal is to show you how to use intel FIT,its highly recommended that you all follow the guide posted at win-raid
(The attached FIT version is 11, if your ME Firmware (FW) is not 11.0.*.* follow the win-raid guide. Use the tools version for your ME FW, for example: ME System Tools v9.1 For systems running ME v9.0 - v9.1)
A video,software (intel FIT) and practice bios are all included. I`ll post a better video and more advanced guide at a later date.
1. Open the... -
HikVision DS-7104HQHI-K1 Motherboard: DS-80303_P REV 2.0 and SN: C47579229 Firmware dump or unlock required. Thank you!...06-11-2025, 01:54 PM
Comment