Re: Surface Pro 6 Bios (Clean Region ME + OFF motherboard)
the surface worked before I started to disassemble everything. now the charging light no longer comes on.
you know how to tell me where to start looking for the breakdown?
1000thx
I think there was a spark when removing the flex from the lcd, but I don't see anything burned ...
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Surface Pro 6 Bios (Clean Region ME + OFF motherboard)
I'm back to putting the original bios.. but the problem continues.. that's why I think q is some physical damage ...
Leave a comment:
-
Surface Pro 6 Bios (Clean Region ME + OFF motherboard)
Hello everyone, I write in case you can help me with my little Surface. I am a person who wants to try to fix something and usually gets into more trouble.
I have been trying to get the materials for 8 months to be able to desolder and flash the bios. After getting the programmer and the hot air station, I killed the surface.
I have managed to extract the Bios from the chip and modify with HxD the region Me, to leave it clean, using the files of the same version.
I attach the Original files and with R.Me clean, in case someone could check,...
-
Re: MS Surface no touchscreen after cleaning ME Firmware **FIX**
wow thank you very much, I hadn't seen that you answered.
I continue studying, researching and going crazy, looking on the internet, some solution so as not to have to desolder hahaha
But I think your solution is the most "easy", although it scares me.
Using the aliexpress adapter is another good option!
Question from Noob, from the "Ru.exe, Ru.EFI", could not modify the values?
...Last edited by Penetre; 04-21-2022, 09:06 AM.
Leave a comment:
-
Re: MS Surface no touchscreen after cleaning ME Firmware **FIX**
the model is a surface 6 pro 1796. I have to desolder the BIOS chip, right?
I have tried to boot from a USB efi Shell + ru.efi. It turns on correctly, but I don't know how to use it.
is it impossible to get a dump from there?
I'm sorry if my questions are silly, I'm still learning on this subject....
Leave a comment:
-
Re: MS Surface no touchscreen after cleaning ME Firmware **FIX**
after an official firmware update, the surface me must be corrupted.
does not finish installing the firmware update, error Code 10. the touch does not work. (Surface ME)
The BIOS has never been touched, the only thing I have done is change all the hardware parts, LCD, Flex, touch plate...
I think that I would only have to modify in the bios, so that the touch is activated....Last edited by Penetre; 04-16-2022, 06:38 AM.
Leave a comment:
No activity results to display
Show More
Leave a comment: