ahmypc
Senior Member
Last Activity: 04-18-2025, 04:31 PM
Joined: 10-08-2013
Location: istanbul
-
Before the bios method, you need to check if there is any damage to the touch socket. When removing or installing the touch flex, the socket itself or the surrounding circuit elements may be damaged. Also, the touch card of the pro 7 is similar to the card of other pro series but not the same. Use only original pro 7 touch cards.... -
Hi, It is interesting that the oobe screen allows passwordless installation or the ability to open a new account. Normally, even if there is no internet connection, it should ask for a session password with a company account. This can happen at any time. The bios file needs to be cleaned.Leave a comment:
-
The above information is only for 2 channel - 4 channel selection. Below are the resistance values that need to be changed according to the RAM chip....Leave a comment:
-
Have you done a me clean with your own Me Region file?...Leave a comment:
-
What I really need is the ME region to be separated. If possible, can you separate just the ME Region? I can do the rest.Leave a comment:
-
Bios settings became changeable. Dfci information was there. I cleaned the ME area myself. Now there is no problem. Thanks....Leave a comment:
-
Thank you for your help. However, my problem is not the password. Due to a code in UEFI, administrator rights are connected to an e-mail account. It is called Autopilot or DFCI in UEFI....Leave a comment:
-
Microsoft Surface Pro 8 1983 Unlock Bios
Hi. I have a surface pro 8 1983 device with locked bios. Bios settings are disabled. I think DFCI is enabled. Can you help me solve the problem.Thanks.
Serial: 0F00AQL214601J... -
There is dfci encryption in bios. I couldn't find a flash image tool program that could open the file. Can you help me remove the password?
Model: Surface pro 9 2083
Serial number:0F016EG23273BF...Leave a comment:
-
It might help if you post your message and your own bios backup on this page.Don't forget to include your Surface device's full model number and serial number.
[url]https://www.badcaps.net/forum/troubleshooting-hardware-devices-and-electronics-theory/troubleshooting-laptops-tablets-and-mobile-devices/bios-requests-only/92224-surface-laptop-3-model-1868-bios-password[/url]https://It might help if you post yo...//www.badcaps.Leave a comment:
-
Pro 8 also has the same integrated. High probability correct diagnosis. As an alternative to the charging adapter, it transfers the type C supply to the charging integrated....
Leave a comment:
-
The schematic of the Pro 9 is not out yet. It looks like the mosfet of the charging circuit. However, there needs to be another number on the integrated circuit.Leave a comment:
-
Is there a need to "clean me" the Surface Pro X with SQ processor like the ones with Intel processor?Leave a comment:
-
I had to double post because I couldn't edit my previous post, I'm sorry. Even though it was late, I was able to notice the patch file. After following the commands exactly, the password was removed. Thank you.Leave a comment:
-
Hi, can you remove the password of my ThinkPad device? Since I was not sure what information was required, I also added the bios image. Thanks in advance.
Model: 6th Gen ThinkPad X1 Carbon 20KGS3W813
Serial: PF18BC5H...Leave a comment:
-
Worked...Leave a comment:
-
When I did Me Region Clean again it worked. thanks....Leave a comment:
-
Thanks for your effort. The unlock_1.bin file worked unlocked but without the serial number and other private information.
The unlock_2.bin file worked but is still locked.
Can we add serial number to unlock_1 file?...Leave a comment:
-
Unfortunately, the logo remained too...Leave a comment:
-
I know. I've already studied with him....Leave a comment:
No activity results to display
Leave a comment: