-
-
Re: MS Surface no touchscreen after cleaning ME Firmware **FIX**
the model is a surface 6 pro 1796. I have to desolder the BIOS chip, right?
I have tried to boot from a USB efi Shell + ru.efi. It turns on correctly, but I don't know how to use it.
is it impossible to get a dump from there?
I'm sorry if my questions are silly, I'm still learning on this subject.Comment
-
Re: MS Surface no touchscreen after cleaning ME Firmware **FIX**
You will have to use an SPI programmer.If the chip is a WSON type (no legs on the chip,soldered flat) you will need to desolder it and use a WSON adapter board,or use a WSON8 pogo adapter
https://www.badcaps.net/forum/showth...ght=WSON8+pogo
https://www.aliexpress.com/item/1005001830846980.html
https://www.badcaps.net/forum/showpo...40&postcount=2
.Last edited by SMDFlea; 04-16-2022, 07:23 AM.Comment
-
Re: MS Surface no touchscreen after cleaning ME Firmware **FIX**
wow thank you very much, I hadn't seen that you answered.
I continue studying, researching and going crazy, looking on the internet, some solution so as not to have to desolder hahaha
But I think your solution is the most "easy", although it scares me.
Using the aliexpress adapter is another good option!
Question from Noob, from the "Ru.exe, Ru.EFI", could not modify the values?
Thank you very much again.
Last edited by Penetre; 04-21-2022, 09:06 AM.Comment
-
Re: MS Surface no touchscreen after cleaning ME Firmware **FIX**
please tell me where you get the ISH Firmware file from, if not, you can't build the fileComment
-
Comment
-
Re: MS Surface no touchscreen after cleaning ME Firmware **FIX**
Which file in pro 7 needs to be changed for me region cleaning?Attached FilesLast edited by ahmypc; 05-15-2022, 03:57 PM.Comment
-
-
Re: MS Surface no touchscreen after cleaning ME Firmware **FIX**
ME Sub Partition.bin .It is the ME firmware.The new PRD_RGN firmware from the repository must be renamed to: ME Sub Partition.bin .If you can`t find the same PRD_RGN version use the nearest older or newer one.
Follow the win-raid guide "D4. CSME 11 - 15 & CSTXE 3 - 4"
https://winraid.level1techs.com/t/gu...zation/31277/2Comment
-
Re: MS Surface no touchscreen after cleaning ME Firmware **FIX**
So what if i don't have oryginal bios for Surface 5 PRO.
I have ISHC Valid = True but the touch screen not working.
How to Fix this ?? Or this is not possible if I don't have original bios
Attached FilesComment
-
-
Re: MS Surface no touchscreen after cleaning ME Firmware **FIX**
Have you installed all updates and drivers from microsoft. Make a bios backup and open it with FIT version 11 ,the ISH settings should be set the same as they are in the 1st picture (left side) at post #1
.Last edited by SMDFlea; 05-20-2022, 10:38 AM.Comment
-
Re: MS Surface no touchscreen after cleaning ME Firmware **FIX**
Yes i have installed all driver. I try this on W10 and W11 and is same result. On bios in FIT is GOOD but touchscreen not working.Comment
-
Re: MS Surface no touchscreen after cleaning ME Firmware **FIX**
awosome man!Comment
-
Re: MS Surface no touchscreen after cleaning ME Firmware **FIX**
Bro,my surface pro4 touch no woring because of bios,but the original bios was lost,can i use this method to repair it?Comment
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Re: MS Surface no touchscreen after cleaning ME Firmware **FIX**
How to open the file (bios bin file)
???Attached FilesComment
-
-
Re: MS Surface no touchscreen after cleaning ME Firmware **FIX**
Your ME firmware is corrupted.Cleaning the ME firmware might fix it, if it will open with FIT.Post your bios in one of the same model thread topics if you can`t clean the ME yourself.
Here`s the ME cleaning guides https://www.badcaps.net/forum/showpo...41&postcount=3Comment
-
Re: MS Surface no touchscreen after cleaning ME Firmware **FIX**
Good afternoon, I have a Surface Pro 4 with the Touch not working and the error in the device listing, for the solution according to the procedure described above would I have to access the BIOS memory physically or would there be some software to be used?Comment
-
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Mọi khoản quyên góp cho badcaps đều được hoan nghênh, hãy nhấp vào liên kết này để quyên góp. Cảm ơn tất cả những người ủng hộ----------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
Re: MS Surface no touchscreen after cleaning ME Firmware **FIX**
Hello I am working on a Microsoft Surface Pro 6, M1086841-003
and I have no touch screen, I have been following this guide and I think
I get what to do I am just having problems picking what file to use
I have ME Version 11.7.4.3330
There are two files in, CSME 11.7 Repository r10, what one do I use
11.7.4.3330_CON_H_DA_PRD_RGN
11.7.4.3330_CON_LP_C_NPDM_PRD_RGN
Any help picking a file please, How do I know what one?. Thanks.Comment
-
Hi all,
This is my first post here (I am very new to forums!) and I hope someone can help. I am looking for a full dump of the BIOS of a HP Proliant Microserver Gen 8 so that I can get this mini server running again. (BIOS version J06 2019-04-04, chip 25Q064A). I think my board was partially bricked after a failed BIOS update.
I got it second hand in this state and all the normal attempts at bios restoration have not worked. I have even desoldered the chip and tried to load the actual BIOS from HP, but it is missing some parts needed to boot the system.
I... -
Hello everyone,
I'm working on an Asus TUF Gaming H670-Pro motherboard and need help finding a firmware dump for the MX25VB8035F (1MB) SPI flash chip.
What Happened:
I mistakenly removed and erased this 1MB chip, thinking it was part of the main BIOS.- I later found that the board has two main BIOS chips (8MB + 16MB), which I have backups for.
- My backup for the MX25VB8035F chip is just an empty 1MB segment filled with FFs, meaning I have no valid data to restore.
- A firmware dump for the MX25VB8035F chip from the same motherboard (or a compatible
-
Hello guys i really need help, i recently updated my DS-7208HGHI-K1 and it somehow got bricked, I've got it up and working now by flashing a new dump file i found but the serial number is really wrong and the uploader of the dump file probably intentionally did it.
I still have the bricked dump file is it possible to transfer the serial number of the "bricked dump" to the "working dump"? -
Hello everyone, I have an LG 23MP48HQ-P with a mainboard EAX65543134. After a power flicker, the monitor only shows the "No Signal" message but goes to a black screen with a brief flash when an HDMI/VGA cable is plugged in. I cannot enter the OSD menu. All main voltages (18V, 5V, 3.3V) are stable under load. I made a backup of the firmware, but it was *after* the fault occurred, so my backup is likely corrupted. I flashed it back with no change in behavior. I can only find the firmware for the 24M38H model online. Could someone please share a working firmware dump for the 23MP48HQ-P?...Yesterday, 04:28 AM -
Hi, i have canon mf264 printer which is stuck in download firmware mode and I'm after a firmware memory dump for this model, so I can try to rewrite. Thanks for your kind help!07-22-2025, 04:48 AM
Comment