Re: bios dump elitebook 840 g3
Seems like I need to paste the pads on the motherboard and place the programmed chip directly over it then place the torch on it -- I've noticed that when it melts, the package aligns with the pads on the motherboard.
But it doesn't work all the time --when the video should come up, it doesn't, the fan just spins. I'm going to erase twice and see if that helps.
Seems like I need to paste the pads on the motherboard and place the programmed chip directly over it then place the torch on it -- I've noticed that when it melts, the package aligns with the pads on the motherboard.
But it doesn't work all the time --when the video should come up, it doesn't, the fan just spins. I'm going to erase twice and see if that helps.
This clip is not intended for use with a WSON-8 chip, do yourself a favor and buy a proper one. I recommend this type -
Comment