bios dump elitebook 840 g3
Collapse
X
-
-
hi, i need help to remove pass hp 840 g3 pleaseAttached FilesLeave a comment:
-
Type the laptop serial number, full name and model, motherboard model, etc.
post the contents of the bios chip even if it is corrupted..
read the forum rules..https://www.badcaps.net/forum/troubl...before-posting -
Attached FilesLeave a comment:
-
Hp elitebook 840 g3
P/no- 6050a2822301 mb a01
S/no-5CG7061B41
Prodid-W4Q61UC#ACJLeave a comment:
-
-
Hi elitebook 840 g3 dump file here plz remove the bios password plzAttached FilesLeave a comment:
-
post the original contents of the bios chip.
you need an SPI programmer...here is a video for example..https://www.youtube.com/watch?v=DWWi...nnel=ThisIsHowLeave a comment:
-
Hello,
I forgot the BIOS password on my HP 840 G3 notebook. Can you help me to recover it?
5CG61806BZLeave a comment:
-
Need help to fix elitebook 840 g3 bios, laptop power on no picture.
ID: L3C65AW
SN: 5CG71637NC
Thank you!Leave a comment:
-
Need help to fix elitebook 840 g3 bios, laptop power on no picture.
ID: L3C65AW
SN: 5CG71637NC
Thank you!Attached FilesLeave a comment:
-
Hello,
i have here hp Elitebook 840 G3 Turns on no display,
SN 5CG8236MG4
Help PleaseAttached FilesLeave a comment:
-
Leave a comment:
-
Hello!
Please help me. There is no image.
HP Elitebook 840 G3
MB - 6050A2892401 MB A01
SN 5CG6180NJK
DDR4 systen ramAttached FilesLeave a comment:
-
It's not a bios issue !
try to open a new thread : https://www.badcaps.net/forum/troubl...mobile-devices
post all the mesurements an beahviour of your laptop sequenceLeave a comment:
-
-
Hi guys, could you please fix the BIOS? When I plug in the charger, it surges to 500-800mA and then stays at 30mA. Thank you in advance.
HP EliteBook 840 G3
6050A2892401-MB-A01
SN#: 5CG815526V
Leave a comment:
-
Related Topics
Collapse
-
by Habble7The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
...-
Channel: Troubleshooting Computer Displays
-
-
by DynaxSCHi, I have an MSI PRO B660M-G DDR4 board with damaged BIOS and i need a bios dump from a real board, along with MAC, UUID and Serial Number info (eg. a BIOS screenshot and pictures from the board stickers).
I need to reconstruct the bios on my board, based on another bios image form a real board - meaning a bios image containing MAC address, UUID and Serial number. A stock BIOS is not suffiecient, as it is impossible to discover where the MAC, UUID and SerialNumber are stored. Tried with a similar board, but there are too much differences, and the stock BIOS is missing a lot of...11-17-2023, 10:56 AM -
by mediadoctorCan you help me upload Bios dump from HP EliteBook 845 G8 with AMD CPU and Touchscreen please 🤝
-
Channel: BIOS Requests ONLY!
-
-
by GuestHello,
I have an EliteBook 850 G5. After a Windows update, including a BIOS update, the notebook turns on, but the screen remains black, and the fans spin at high speed—nothing else happens.
I assume the BIOS update failed, so I searched for the BIOS chip.
I found a Winbond chip located between the RAM and the hard drive, which has a size of 32 MB.
However, the BIOS update available on HP's website is only 17 MB in size. I used the update version that was previously installed when the notebook was still working.
Can the corrupted...-
Channel: BIOS Requests ONLY!
-
-
by MDSIHello,
I'm requesting a full BIOS dump (including EC firmware) for an HP OMEN 17-an012nf laptop.
Details:
Model : HP OMEN 17-an012nf
Motherboard Part Number : DAG3BAMBAF0 REV : F
Serial Number (S/N) : 5CD7280D51
BIOS chip : Winbond W25Q64VSIQ
Programmer : EZP2023+
Issue : The motherboard is not powering on. Only the 5V rail is present. The 3.3V rail is missing because EN1 on the SY8286B remains stuck at 0V. This signal is driven directly by the EC/SIO. I replaced the 3.3V regulator and confirmed it's working.
I already...-
Channel: BIOS Requests ONLY!
-
- Loading...
- No more items.
Leave a comment: