Re: Benq G2255 doesn't power on - amber power light when plugged in
Will, just in case (it might have no bearing) but R802 is a 304 resistor which is 300K ohms, and I get 25K ohms across it?
Ok, for resoldering the 2 pin and removing jumpers. I will also resolder every through hole component from the transformer pin 7 to CN801, including CN801.
Thanks again for your incredible support and knowledge!
Will, just in case (it might have no bearing) but R802 is a 304 resistor which is 300K ohms, and I get 25K ohms across it?
Ok, for resoldering the 2 pin and removing jumpers. I will also resolder every through hole component from the transformer pin 7 to CN801, including CN801.
Thanks again for your incredible support and knowledge!
Comment