Announcement

Collapse
No announcement yet.

Search Result

Collapse
200 results in 0.6910 seconds.
Keywords
lg 5
Members
Tags
  •  

  • LG xboom PN5 stuck in demo mode(?). Looking for retail firmware.

    I took an ebay gamble on an LG xboom pn5 speaker which was listed as having battery issues (turning on then off).

    I got it earlier today and concluded it's in a demo mode because of the following:[LIST][*]When it's plugged in, it'll turn on and the power button will not turn it off[*]Battery is healthy, reading 4.2v and not swollen, charges according to the xboom app[*]the play/pause and volume buttons don't work[*]You can pair to it and play music fine, as long as it's connected to power[*]The bluetooth connection is disconnected after 5 seconds of audio pausing[*]The DTS setting...
    See more | Go to post

  • 17mb82-2 25q64 25q16 bin

    We buy some time for the second memory dump spi flash, 25q16 and 25q64, 17mb82-2 v066b motherboard, display two notations ves315wndl-01 (lc320dxj-sfe1), we found different binuri for display of 21.5 "lg, giving high image at the top and pulled back to the left to the right side, please somebody has this software on those statements 25q16 25q64 saved from a functional TV or tested on this type of display, not the other but I already gave these memories down a few times, and risked running out wiring, LED TV TE32160B29C10UD-17mb82-2 ves315wndl 25q64 and 25q16-01 spi, excuse my English but is...
    See more | Go to post

  • Some additional information: I had used LVDS cables from ALIexpress with the LG connectors on the panel side. As this panel has 2 connectors I needed two cables, one with 51 pins, the other with 41 pins. Unfortunately for one of them I could not find cables with 5 data pairs, so I have 4 data pairs for two LVDS channels on one connector and 5 data pairs for also two LVDS channels on the other connector. This leads to first LVDS Receiver Signal E +/- and second LVDS Receiver Signal E +/- are not connected, while for third and fourth LVDS Receiver Signal E +/- are connected.
    Could this be...
    See more | Go to post

    Leave a comment:


  • LG 14FU7RB doesnt turn on.

    Hello everyone

    I am new in this forum and I need your advice. I would like to fix my grandpa tv which is LG tv 14FU7RB. I already did some research according to the board. I already measured the voltage in primary and secondary block. primary elco in primary section is 300v. STR IC pin 4 vcc 9 volt but in secondary section every dioda that supply dv voltage like 9 volt 5 volt 5 volt standby and even B+ for flyback doesnt have any voltage come out. if you guys know how to solve please help me. I want to learn to fix this TV since I am still newbie ij this kind of stuff....
    See more | Go to post

  • LG 65UQ7570PUJ screen flickers

    I turn the tv on and the screen flashes while its black with no sound or anything coming out of it. Acts like it is power cycling. Eventually the tv comes on after about 3-5 minutes of it doing that and works. Would this be a case of the panel going out, a board issues, or the backlights?
    See more | Go to post
    Last edited by blake.s; 03-03-2025, 03:36 PM.

  • LG 50PK590 - three clicks and steady red light, won't turn on.

    Hi all,

    I've got a LG 50PK590 plasma TV which upon plugging in will click three times and the red LED in the corner will come on and stay on, the TV however doesn't come on (no humming, sound, video, etc.) and using the touch controls or the remote does nothing. On exceptionally odd occasions, the TV will come on and work normally when plugged in and will last about 5 minutes before going back to off and unresponsive.

    I've got the back off of it and none of the caps stand out as visibly buggered, I've also tested the three resistors in the corner of the power board which...
    See more | Go to post

  • LG C1 65'' dead standby

    I've owned this C1 from new since late 2021, and it has now suddenly started with the following symptom:
    If power has been connected for a while, the red standby lamp turns off, and the tv wont turn on (no reaction from remote or button on tv).
    If power has been disconnected for 5 minutes, the tv turns on fine, until turned off and left for a couple minutes, as the standby light will then turn off again.

    I've seached and found that this is most likely a failing PSU, and I've seen repair services on eBay fixing these symptoms, so I am hoping that someone here has fixed...
    See more | Go to post

  • Here are the cables under my scope....
    See more | Go to post

    Leave a comment:


  • Micom controls all dc/dc converters and switches for powering cpu, ram,..., do these voltages also appear on the motherboard (1.2V, 1.8V, 2.5V, 3.3V, 5.0V)?

    Service Manual......
    See more | Go to post
    Last edited by lotas; 01-11-2025, 06:07 PM.

    Leave a comment:


  • 15u530 main board mp rev 1.5 schematic

    [B]15u530 main board mp rev 1.5 Schematic[/B] Need pleace..
    LG Laptop..
    [B]15u530 main board mp rev 1.5 Schematic[/B] Need pleace..
    LG Laptop..
    See more | Go to post

  • LG 32LG3000 TV, three red light flashes, then the backlight turns on, but no picture

    Hello everyone! I've found this television, and I began troubleshooting it.

    First, the television kept rapidly power cycling. I've warmed up the capacitors with a hairdryer, and after 3 dimmed red blinks, the backlight turned on, then turned dim, and no picture was present on the screen.

    I believed that this was caused by a bad power supply producing insufficent power (I've measured 3.5v on the 5.2v rail), so I've blindly recapped the board.

    After the recapping, all the voltages stableized, however, the issue in the title still remains.

    I could...
    See more | Go to post

  • Bad mains power causing TV malfunctions?

    Hi,
    I've been living in the same apartment for about 5 years now, and moved into it with my old Samsung plasma TV (PS51F5500).
    Ever since we've moved in, we would sometimes see strange power-cycling behavior. For example:[LIST][*]TV would randomly turn off then back on.[*]TV would turn off and the LED light would blink for a while (over a minute sometimes) until eventually it went back to a regular off state and could be turned on[*]Sometimes it would require disconnecting the mains cord from the TV, waiting several minutes, then putting it back in and turning the TV back on. This...
    See more | Go to post

  • LG OLED77G2PUA Not Powering On After Storm

    Got it for free on marketplace because it stopped working after a storm.

    When I began troubleshooting the power supply, I fried 2 fuses and a mosfet by shorting 2 pins on accident, but I've replaced those components.

    The tv had a soundbar connected, which was also killed by the storm. On the tv side I found a transistor shorted on the hdmi 2 (arc) and a lot of capacitors shorted on the main board.

    Disconnecting and reconnecting the psu to main board cable, while still being connected to 120 V AC, would wake things up, such as a red light from the optical...
    See more | Go to post

  • LG 55UH6150- trouble powering up, then half lit screen (pictures!)

    The 55" LG has been in the basement for a few months without being used. Turned it on yesterday, set came on as it should and showed a complete screen for about 5 seconds (was on a broadcast channel but no antenna was connected), then the screen went mostly dark with about 1/3 of the screen on the right lighting up with brighter lines in that lit part (sorry, no pictures of that). Power LED was cycling too, preventing the TV from fully powering up.
    Pulled the back off, all boards looked OK. Pulled the LED connector, turned the set on to see if it would power up but I don't belive it...
    See more | Go to post
    Last edited by valvashon; 11-24-2024, 12:13 PM.

  • I'm looking for a dump for the LG PF1000U projector (chassis FM51E), (NAND Hynix H27U1G8F2CTR SPI_FLASH: MX25L8035EM2I, EPROM 24C256C).

    There is no epk file available anywhere

    This device attempts to turn on and responds to both buttons and the remote control:

    It exits standby, runs the fans for 5 seconds, then spins them at 100% for another 5 seconds judging by the sound, and then goes back into standby.

    The problem seems to be a corrupted NAND as it appears to me:

    [ 0.110000] NAND device: Manufacturer ID: 0xad, Chip ID: 0xf1...
    See more | Go to post

    Leave a comment:


  • LG OLED C1, SOS-Turn Off, Stand alone test

    Hello guys,

    I recently picked up an LG C1 in 65 inch size. Previous owner told me that the TV won‘t start, so I did believe due to PSU issue, but not this time. I could narrow it down to the T-Con or Panel.

    PSU and Mainboard work both like intended, all Voltages available, Optical on when T-Con lower Ribbon is disconnected and I even managed to get some picture with P-Only, IN-STOP cycle but only for 2 sec. before shutdown.

    For the stand alone test the panel starts with some flashing horizontal white lines and then continues to build up some color on the...
    See more | Go to post

  • LG 55LM6200-TA country group/Area option

    This is a 2012 LG TV so aware full functionality of the smart functions/apps will be limited however currently unable to get the LG Smart Store.

    Youtube, Netflix and LG Smart store icons briefly appear in the apps list but then automatically disappear after doing 'Initialisation of Premium' via the standard menu, I'm guessing this is due to the Country/Area group its set to is wrong for the UK.

    Unable to change the country group, Area option can be changed which alters the country group but none make any difference. So believe its the country group that needs changing....
    See more | Go to post
    Last edited by notallbad; 10-20-2024, 12:04 PM.

  • LG LGN45 N450 Schematic

    LG LGN45 N450 Schematic
    DA0LG3MB6G0...
    See more | Go to post

  • LG OLED 55EG9100: is this screen damaged?

    Merry Christmas everyone!

    I got this TV for free, hoping that I would be able to fix it. So far I can't....
    The previous owner claimed that the screen is good, the TV has never been hit or dropped or anything like that; physically the screen does look intact.

    Symptoms:
    When I press the remote, a relay inside it clicks and a second later clicks again (refuses to power on).

    When I disconnect the black ribbon cable from the main board and the tcon board, the tv refuses to run from the remote nor from the "on" button underneath the screen,...
    See more | Go to post
    Last edited by ivan_z; 12-24-2023, 03:02 PM.

  • rmps
    started a topic HP LA2205WG weird image

    HP LA2205WG weird image

    Hi guys,
    I have a problem with this monitor and i need your help.
    Is this a bad power supply, bad mainboard or bad panel?
    The panel is a LG LM220WE1.
    If the monitor is powered off for 2 or 3 days, upon connecting, image appears without any issue for a few seconds only.

    My measurements so far:
    VGL: -5.362V
    VGH: 33.12V
    VGH_L: 33.12
    VDD: 12.70V
    VCOMC: 5.535
    GVDD_E: 33V oscillating with -5.3V
    GVDD_O: Same as GVDD_E
    VIN: 5.112V
    SCL/SDA: 3.3V

    Thanks in advance...
    See more | Go to post

  • HP ProDesk 600 G5 + LG SJ2 Bluetooth Sound Bar ProDesk 600 i5-9500T Specification for Upgrade or Repair

    This specification for the HP ProDesk 600 G5 + LG SJ2 Bluetooth Sound Bar can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the ProDesk 600 G5 + LG SJ2 Bluetooth Sound Bar boardview and ProDesk 600 G5 + LG SJ2 Bluetooth Sound Bar schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please...
    See more | Go to post

  • LG 7Z90R-G.AA56Y Notebook Specification for Upgrade or Repair

    This specification for the LG 7Z90R-G.AA56Y Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 7Z90R-G.AA56Y boardview and 7Z90R-G.AA56Y schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download for LG...
    See more | Go to post

  • LG 5Z90RT Notebook Specification for Upgrade or Repair

    This specification for the LG 5Z90RT Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 5Z90RT boardview and 5Z90RT schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download for LG 5Z90RT Notebook is...
    See more | Go to post

  • LG U series 15Z90RT-G.AA75B Notebook Specification for Upgrade or Repair

    This specification for the LG U series 15Z90RT-G.AA75B Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 15Z90RT-G.AA75B boardview and 15Z90RT-G.AA75B schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or...
    See more | Go to post

  • LG 7Z90R-G.AA78Y Notebook Specification for Upgrade or Repair

    This specification for the LG 7Z90R-G.AA78Y Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 7Z90R-G.AA78Y boardview and 7Z90R-G.AA78Y schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download for LG...
    See more | Go to post
Working...
X