Re: Sharp aquos LC-40LE810E
40LE810
for 2 blinks change Optocoupler
pc7701 pc7703 pc7702 pc7901
mai mult ca sigur doar unul e defect,dar nu am mai stat sa vad care ,e al treilea intalnit cu acest defect,la primul ma chinuit ceva ore,acum e doar rutina
more than sure only one is defective, but I didn't wait to see which one, it's the third time I've encountered this defect, the first time I struggled for a few hours, now it's just routine
iuliantv
Member
Last Activity: 04-14-2025, 07:39 AM
Joined: 08-31-2009
Location: Bacau
-
Re: looking for vestel mb211s recovery firmware usb
[url]https://easyupload.io/y7z9nv[/url]Re: looking for vestel mb211s recove...o/y7z9nv[/url]Leave a comment:
-
Re: cello c55sfs4k firmware problem
Good evening, I also have a FERGUSON F55SFS4K which seems to use the same mainboard, and it seems we have the same problem, stuck in hiya, and can you give me this software too, thank you very much
6520-0.1.115_boot_and_full_aml_upgrade.img.user.signedLeave a comment:
-
Re: Toshiba Satellite L70/S70/S75/C70-A-M3W [DA0BD6MB8D0] BIOS
bd6130 trimmed1.zip
ran perfectly on Toshiba c75-a-13q BD6 i3-4005M
thank youLeave a comment:
-
Re: SAMSUNG LC24FG70FQUXEN C24FG70FBN91-18169A (BN41-02548A) locked in stby
nimeni nimic ?Leave a comment:
-
Re: VESTEL Main Board, LED TV. How to change the Boot Logo?
1) Descărcați fișierul „jpg” și copiați-l pe orice disc USB Flash.(imaginea jpg trebuie sa aiba rezolutia maxima suportata de televizor,1366x768 pentru hd ready 1920x1080 pentru fhd ........
2) Conectați discul flash USB la televizor.
3) Deschideți Media Media > Flash disk de pe telecomanda televizorului și accesați meniul „ Imagini ”.
4) Găsiți fișierul „ Vestel.jpg ” pe care l-ați descărcat și...Leave a comment:
-
Re: SAMSUNG LC24FG70FQUXEN C24FG70FBN91-18169A (BN41-02548A) locked in stby
nothingLeave a comment:
-
Re: SAMSUNG LC24FG70FQUXEN C24FG70FBN91-18169A (BN41-02548A) locked in stby
nobody, nothing?Leave a comment:
-
SAMSUNG LC24FG70FQUXEN C24FG70FBN91-18169A (BN41-02548A) locked in stby
samsung monitor SAMSUNG LC24FG70FQUXEN C24FG70F locked in stby
digital board BN91-18169A (BN41-02548A) I would need the software from 25Q32 IC402
even for the 27 "model if nothing else, it may fit
thank you -
Re: Apple 27" Cinema Display (A1316) has trouble turning backlight on
in the link above he also says in that post that, to connect only to 2 ends of some 3v resistors, that the third channel is not used, which is a mistake, because the inverter has 3 channels, 3 bars that go up to about 80v when pwm is forced to a maximum of 3 volts, why do I say that? today I struggled again and I managed to turn on the monitor only if I connected the third contact, I think it had a faulty channel or part of the LEDs to say that it was in error, finally I solved the problem without leaving...Last edited by iuliantv; 11-21-2020, 05:10 PM.Leave a comment:
-
Re: Apple 27" Cinema Display (A1316) has trouble turning backlight on
I'm sorry, but my apple display 27 "has a completely different source of power, otherwise I would put pictures with it...Leave a comment:
-
Re: Apple 27" Cinema Display (A1316) has trouble turning backlight on
hello, I have this apple cinema display 27 "A1316, with well known problem, it has no backlight, I applied the method described in other forums, I minimized the light from the macbook, I restarted the systems, it started ok apple cinema display 27", the light seems to be correct, without shadows, spots or dimly lit parts, which leads me to think that the LEDs, the backlight is ok, I applied the method described on other forums, I removed the 3 resistors, and I applied 3v on the ends of 2 of them,...Last edited by iuliantv; 11-21-2020, 02:00 AM.Leave a comment:
-
https://drive.google.com/uc?id=1lp7f0ErEAT1HJsZdc4_NxXGFtUfH1uVn&export=download...Leave a comment:
-
Re: panasonic l39em5b dump 24c32 24c16
hohohoLeave a comment:
-
Re: Vestel 17mb61-2 Firmware Problem
no need mboot.bin is enough usb_auto_update.... and ...mb61.bin ...., put these two files directly to USB stick without archive or folders, disconnect the TV from the mains supply, insert the USB stick, press the OK button and holding the remote control, the TV is connected to the mains, the OK button is released when the front LED starts flashing rapidly, expect about 1-2 minutes and the TV will start one of the first installation, the display is important to tell the type of TV you, success
[url]https://www.xfile.ro/download/4e0a5942...Last edited by iuliantv; 12-26-2015, 10:07 AM.Leave a comment:
-
panasonic l39em5b dump 24c32 24c16
Merry Christmas, please help to panasonic l39em5b , ssb tnp4g539, on a 39inch tv, crash 15 flasuri Front LED source inverter,, ok,, LED'm ok, I put an empty memory instead 24c16 the old ic901 and LED front does not light up, ic902 24c32 I have not tampered with it, I would try something a dumpuri for ic901 24c16 and ic902 24c32, rewriting flash memory programmer can not speak, I programmer for it, type flash memory is NAND flash h27u1g8f2btr- TSOP48, thank youLast edited by iuliantv; 12-25-2015, 01:11 PM. -
Re: 17mb24h-2 rewrite VCT49X3G PZ F1 000
thank you, I thought tx and rx variant, but did not try, I'll try and I'll post the result, only betterLeave a comment:
-
17mb24h-2 rewrite VCT49X3G PZ F1 000
Hi, LCD chasis 17mb24h-2, behaves strangely, buttons panel tv everything is ok, but the remote control any key would hit only the function menu, the remote ok, I tried other remote Vestel same problem every key pressed do menu function, changed with an identical CPU but with soft 17mb24-2, for some time I bother rewriting software in processor PZ F1 VCT49X3G 000, so do not speak of EPROM memory 24c64, which was rewritten without success, the same event, this processor VCT49X3G PZ F1 000 can be rewritten by SCL SDA, board mb24h-2, is coupled pl305 SCL SDA GND debug, I connected to it coupled with... -
Re: Sharp LC-40LE810UN question
no idea ?
Leave a comment:
-
Re: Sharp LC-40LE810UN question
I took ic2004 (denoted by 402m 40b2) the same error, I think IC5001 (24lc21ai) has something to do with this error because it is located in the hdmi I tried starting the service mode with the following variants STBY and V-, STBY and V + and p + STBY, STBY and p- without result...Leave a comment:
No activity results to display
Leave a comment: