3300uF low-ESR caps suitable to PSUs in D10mm - may be possible!!

[Behemot]

Re: 3300uF low-ESR caps suitable to PSUs in D10mm - may be possible!!

The pricing is here. All who showed some interest will get PM, if I miss somebody or you want some too, PM me Another thing, if you US guys deal with each other, I can ship to one of you and he can redistribute than…you may save on shipping.

To repeat:
KZN 3300 uF/16 V, D10x40, 3,6 A ripple current, 10000 hours at 105 °C
22,65 CZK <10 pcs
20,64 CZK >=10 pcs
18,62 CZK >=30 pcs
16,61 CZK >=100 pcs
14,60 CZK >=300 pcs

1 USD is aprox. 22,2 CZK now.


Other interesting things in my offer:

• Samxon RS 3300/16 D10x30
• Rubycon MBZ 1000/6,3 D8x11,5
• Rubycon MFZ 2700/6,3 D10x20
• NCC KXJ 10/400 D10x16
• NCC KXJ 150/400 D18x40
• NCC KYA 1500/16, 1000/25, 680,/35 D10x20
• NCC KYA 3300/6,3 D10x25
• NCC KZH 1000/16 D8
• NCC KZM 47/35 D5x11
• NCC KZM 470/16 D8x11,5
• NCC KZN 1500/6,3 D8x20

[mockingbird]

Re: 3300uF low-ESR caps suitable to PSUs in D10mm - may be possible!!

PM Sent!

[Behemot]

Re: 3300uF low-ESR caps suitable to PSUs in D10mm - may be possible!!

Christmas already here…they are also actually made in Japan

[mockingbird]

Re: 3300uF low-ESR caps suitable to PSUs in D10mm - may be possible!!

I'm really curious as to whether Nichicon will still make custom orders of HZ as long as it meets their MOQ.

BTW, can you test the 16v 3300uF with your ESR meter and see if they meet spec (Not that I doubt it)?

[Behemot]

Re: 3300uF low-ESR caps suitable to PSUs in D10mm - may be possible!!

I can, but it will be worthless, it will definitelly show ESR 0

EDIT// so it shows 0,02 ohm ESR (Samxons are 0,03-00,04) and capaity from 3550 to 3720 uF.

[mockingbird]

Re: 3300uF low-ESR caps suitable to PSUs in D10mm - may be possible!!

Good. 0.018 was too low for my liking. If these are in PI filters, I like them to be between 0.025 and 0.40 because the other caps usually fall between this range.

Now all we need are 6.3V 4700uF in 10mm for those Teapo SC.

[mockingbird]

Re: 3300uF low-ESR caps suitable to PSUs in D10mm - may be possible!!

Early Hanukkah Present From Behemot: (Click attachment for higher res)



This was shipped on the 26th and it arrived today. That's three days from Prague to Canada!!! And it only cost me around $12 to ship!

*mockingbird caresses his 10mm KZN caps "my preciousssss".

Thank you so much Behemot!

[Behemot]

Re: 3300uF low-ESR caps suitable to PSUs in D10mm - may be possible!!

Well, I do owe you 50 of them still right? I think that I have mistakenly packed only 50 pcs…next time I'll have other interesting stuff I can send them with

What about SATA female power connectors?

Also check a new thread