philips 65PUS6162/05 dead no sby led

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • lotas
    Badcaps Legend
    • Jan 2016
    • 4562
    • Russia

    #81
    Re: philips 65PUS6162/05 dead no sby led

    Read the contents and save your dump (maybe it's working), I'll put it here from Philips 55PUS626212 TPM17.7E LA 715G8709-M0E-B00-005N, upload it and see if there are any changes.

    Comment

    • nomoresonys
      Badcaps Legend
      • Jan 2013
      • 12129
      • U.S.

      #82
      Re: philips 65PUS6162/05 dead no sby led

      wonder if this one will work, same model: https://www.ebay.co.uk/itm/255772953...Bk9SR-6Op7aMYQ

      Comment

      • nomoresonys
        Badcaps Legend
        • Jan 2013
        • 12129
        • U.S.

        #83
        Re: philips 65PUS6162/05 dead no sby led

        maybe ask them if it will work, they may know, they seem to have many tv parts for sale, hopefully the other methods will work for you, so you don't have to buy a board.
        Last edited by nomoresonys; 11-10-2022, 03:35 PM.

        Comment

        • jimbofz
          Badcaps Veteran
          • Apr 2013
          • 539
          • uk

          #84
          Re: philips 65PUS6162/05 dead no sby led

          Originally posted by nomoresonys
          wonder if this one will work, same model: https://www.ebay.co.uk/itm/255772953...Bk9SR-6Op7aMYQ
          the screen type is different and the paper label snds in PL233
          but mine ends in PL237
          they scrap tvs with damaged screens and sell the boards
          there stock answer is
          all the numbers must match( but they say that about all the boards they sell)

          Comment

          • jimbofz
            Badcaps Veteran
            • Apr 2013
            • 539
            • uk

            #85
            Re: philips 65PUS6162/05 dead no sby led

            Originally posted by lotas
            Read the contents and save your dump (maybe it's working), I'll put it here from Philips 55PUS626212 TPM17.7E LA 715G8709-M0E-B00-005N, upload it and see if there are any changes.
            managed to load ch341a software and removed eeprom from board ,read its contents and saved in folder
            do you have to erase the contents then re write same data to chip
            or do you have data i can compare?

            Comment

            • nomoresonys
              Badcaps Legend
              • Jan 2013
              • 12129
              • U.S.

              #86
              Re: philips 65PUS6162/05 dead no sby led

              if no luck, I would out of curiosity contact this seller and see if they can tell if this board will work, looks the same but some differences in labels, they encourage people to contact them if they have any questions, I do see the exact board you have but its 131 pounds from France compared to this one at 45, which would be a deal IF compatible: https://www.ebay.co.uk/itm/234637015...Bk9SR4DtiLONYQ

              Comment

              • jimbofz
                Badcaps Veteran
                • Apr 2013
                • 539
                • uk

                #87
                Re: philips 65PUS6162/05 dead no sby led

                Originally posted by nomoresonys
                if no luck, I would out of curiosity contact this seller and see if they can tell if this board will work, looks the same but some differences in labels, they encourage people to contact them if they have any questions, I do see the exact board you have but its 131 pounds from France compared to this one at 45, which would be a deal IF compatible: https://www.ebay.co.uk/itm/234637015...Bk9SR4DtiLONYQ
                i contacted 2 sellers of similar boards but they cant confirm compatibility
                perhaps theres some philips dealer that may know more about the board labels and weather its possible to enter s menu to change screen size to 65
                im hoping lotas has a bin file i can compare ,being an optomist it could be corrupt data causing what diff calles half boot
                Last edited by jimbofz; 11-12-2022, 04:32 AM.

                Comment

                • nomoresonys
                  Badcaps Legend
                  • Jan 2013
                  • 12129
                  • U.S.

                  #88
                  Re: philips 65PUS6162/05 dead no sby led

                  for sure, hope the file works, I can't believe its this hard to find out board compatibility in 2022 but it sure seems to be.

                  Comment

                  Related Topics

                  Collapse

                  • kew1701
                    Philips taw6205 ambilight speaker STM32 mcu dead
                    by kew1701
                    Resolved dead cap which burned mcu(stm32f091rct6) ,between vss and vdd on desoldered mcu is short 5.8oh,is there a way to obtain firmware from it.i have firmware,but i thing this is for wifi/bt board phorus 5 which is on top of amp board(here lies dead mcu)...my stm32 flasher is on the way....
                    04-09-2025, 03:59 AM
                  • Rubenlily
                    Philips 50PUS6503 - dead panel? Picture
                    by Rubenlily
                    Hey,

                    I gave up on my last TV and got a new one to try.

                    Only vertical lines. Sound is OK. Screen is black with a few white lines until I change channel, then these colors gradually starts filling up the screen.

                    Is this fixable in any way or should I just give up on this one too?...
                    08-21-2023, 01:07 PM
                  • double_DD
                    How can I be sure that my EC chip is dead?
                    by double_DD
                    Hi all,

                    As the title suggests, how can I be sure that my EC chip is really dead?

                    I've recently gotten into this hobby of laptop repairs, and have successfully brought back to life a couple with some easy fixes, mostly shorted caps.

                    Now I'm working on HP Probook 455 G8, that had some "devil" run around on 3V line, burning a bunch of stuff. Luckily I have a dead 455G7 (for spare parts) so I managed to fix it (swapped burned parts) to a point that it will charge (both on barrel jack and usb-c), but it doesn't want to turn on. There is a 3V3 on a keyboard...
                    03-12-2025, 07:47 AM
                  • G33RT
                    Philips 8200 series 65PUS8204/12 stuck at Philips Logo
                    by G33RT
                    Philips 8200 series 65PUS8204/12 stuck at Philips Logo, it does not reboot it just stays on the logo.

                    It does power up when pressing the power button.

                    I already try the power button while plugin the plug with no result.
                    Also put the latest firmware autorun-TPM191E_R.001.004.100.000.upg on a MBR/FAT32 USB stick at USB port2 with no result either.

                    Could this be an PSU or eMMC issue ?
                    07-19-2025, 03:43 AM
                  • vikivng
                    PHILIPS 40PFL7007 TV DEAD. D501 testing SHORT on DMM
                    by vikivng
                    Hi guys pls can someone help with this set..
                    Tv doesnt not power on.
                    No standby light.
                    There is a burn mark by the leg of D501 diode.
                    The diode tests short in both directions.
                    I have been reading this usually means the diode is faulty? As normally would be open.
                    I have not yet taken voltages since this is obviously short I would like to replace it.
                    Can someone help me with a substitute for this diode since it seems not to be the standard type?...
                    08-22-2022, 10:51 AM
                  • Loading...
                  • No more items.
                  Working...