On power up the backlight comes on but no picture
Power on - 3.4v
13.2v - 13.2v
Drv_on - 3.25v
V-Sync - 0.04v
SIN - 0.02v
SClk - 0.01v
P-dim - 1.4v
P-dim2 - 1.3v
With the left tcon ribbon removed just backlight still on fulscreen, no change.
With the right tcon ribbon removed that half of the screen is considerably darker.
Any advise please.
thanks
Power on - 3.4v
13.2v - 13.2v
Drv_on - 3.25v
V-Sync - 0.04v
SIN - 0.02v
SClk - 0.01v
P-dim - 1.4v
P-dim2 - 1.3v
With the left tcon ribbon removed just backlight still on fulscreen, no change.
With the right tcon ribbon removed that half of the screen is considerably darker.
Any advise please.
thanks
Comment