N75UX17A-AU T-COn board issue?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • RooTV
    Senior Member
    • Apr 2020
    • 128
    • Australia

    #1

    N75UX17A-AU T-COn board issue?

    would I be right in thinking this may be a tcon board issue?

    Its a Soniq N75UX17A

    All I have is this picture and the guy said that he bought it yesterday but something must have happened in transit.

    Not sure if thats screen damage in the middle bottom or not?

    update.

    got a close up photo of the mark in the middle bottom of the screen.

    Looks like panel damage to me. I have told him it is unfixable and only good for parts unfortunately

    I have included the photo. what do you think?
    Attached Files
    Last edited by RooTV; 07-05-2020, 05:38 AM.
  • diif
    Badcaps Legend
    • Feb 2014
    • 6978
    • England

    #2
    Re: N75UX17A-AU T-COn board issue?

    Obvious panel damage.

    Comment

    • nomoresonys
      Badcaps Legend
      • Jan 2013
      • 12206
      • U.S.

      #3
      Re: N75UX17A-AU T-COn board issue?

      AND NOW a double thread?????????????? 2 threads to ask the same question about the same tv, started 30 minutes apart on a Sunday morning...what's the matter are we not answering fast enough for you????????
      Last edited by nomoresonys; 07-05-2020, 09:50 AM.
      Quit because THIS SITE LETS A ROGUE MEMBER TYPE ANY GARBAGE HE PLEASES AND THE POWERS THAT BE NEVER DO ANYTHING ABOUT IT SO HE NEVER QUITS. THEN YOU GET A PENALTY FOR RESPONDING TO HIS ATTACKS. BEEN GOING ON FOR WAY TOO LONG. DONE SUPPORTING A SITE THAT ALLOWS THIS BS.

      Comment

      • budm
        Badcaps Legend
        • Feb 2010
        • 40746
        • USA

        #4
        Re: N75UX17A-AU T-COn board issue?

        Originally posted by nomoresonys
        and now a double thread?????????????? 2 threads to ask the same question about the same tv, started 30 minutes apart on a sunday morning...what's the matter are we not answering fast enough for you????????
        +1
        Never stop learning
        Basic LCD TV and Monitor troubleshooting guides.
        http://www.badcaps.net/forum/showthr...956#post305956

        Voltage Regulator (LDO) testing:
        http://www.badcaps.net/forum/showthr...999#post300999

        Inverter testing using old CFL:
        http://www.badcaps.net/forum/showthr...er+testing+cfl

        Tear down pictures : Hit the ">" Show Albums and stories" on the left side
        http://s807.photobucket.com/user/budm/library/

        TV Factory reset codes listing:
        http://www.badcaps.net/forum/showthread.php?t=24809

        Comment

        • RooTV
          Senior Member
          • Apr 2020
          • 128
          • Australia

          #5
          Re: N75UX17A-AU T-COn board issue?

          Originally posted by nomoresonys
          AND NOW a double thread??????????????
          I am so sorry. I didnt even know I had done it.

          I was editing the original thread to add/change photos and I must have created the second one by mistake.

          It wasnt intentional.

          Comment

          Related Topics

          Collapse

          • Soulzink
            Samsug washing machine. Power supply DC41-00189a board issue
            by Soulzink
            Hi everyone,

            I am trying to fix a samsung washinmachine power supply main board.
            I already replaced it with another one to fix the machine but i want to try understand the issue with the old board.
            Therefore i hope to be able to get some help to explain what to check in order to troubleshoot.
            The power supply board reference is the following: DC41-00189a
            I have followed one thread (https://www.badcaps.net/forum/troubl...ingmachine-rel...
            04-19-2025, 06:26 AM
          • howardc64
            A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
            by howardc64
            Problem

            This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
            08-04-2024, 10:36 PM
          • Asraf Atb
            Help Needed: Samsung UE55MU8000 Dead - Possible Main Board Issue
            by Asraf Atb
            Hi everyone,

            Im looking for some advice regarding my Samsung UE55MU8000 TV with main board model BN94-11606C. The TV suddenly stopped turning on and now shows no signs of life at all not even the standby light at the bottom.

            Initially, I suspected an issue with the PSU, so I took it to a repair center. They tested it and confirmed that the PSU works perfectly, even on other TVs. Based on that, I started investigating the main board.

            I disconnected the main board from the PSU, and the backlight turned on, which seems to confirm the main board is the issue....
            01-27-2025, 05:02 PM
          • notallbad
            TCL 55RP620K power board issue
            by notallbad
            Originally the tv arrived with dimmed backlights (not failed leds) but everything else worked ok. Adjusting backlight in menu did nothing but voltage changed on dimming control pins,
            0% p_dim at 1.65v and a_dim at 1v
            50% p_dim at 3.3v and a_dim at 1.65v
            100% p_dim at 3.3v and a_dim at 2.88v

            Changed backlight leds anyway as always like to have complete peace of mind they wont fail shortly after selling the tv. No change as expected!

            Leds are 2 rows of 15 6v leds.

            On inspection of the power board found diode MBR3200 shorted so replaced with...
            07-12-2025, 05:45 AM
          • Tynan Dill
            Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
            by Tynan Dill
            I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

            Upon bringing it home and plugging it up, it showed a standby light.

            I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

            The screen seems to blackout and stay black, but with a flashlight I can see the display.

            With my Playstation 4 connected via HDMI, and running a game I can hear sound.

            Assuming...
            11-22-2024, 01:46 PM
          • Loading...
          • No more items.
          Working...