Maybe take the powerboard out and check underside for bad/cold solder joints, sometimes they look ok but can be loose, look closely at anything on a heatsink and the transformer legs joints, they take the most abuse, be very CAREFUL not to touch the HOT parts, they can hold a BIG charge for quite a while.
5- times blinking Check PANEL_VCCat pin 1 of CN6001 on the B* Board which is the mainboard, page 24 service manual.
Hi
That's where if all started.. no 12 vdc at that test point.
Kinda pointing to the main board. The fuses on this board are
Very small. Gonna just replace the main board
I would have felt better about it being the mainboard if we could have proven the backlights and powerboard somehow, those fuses are small but pretty easy to check.
Comment