Follow the wire back to where it comes from, then check the components, If you look at the service manual it does give some direction where to look, search the manual for inv_on or inv_ctl etc. to follow the path
Follow the wire back to where it comes from, then check the components, If you look at the service manual it does give some direction where to look, search the manual for inv_on or inv_ctl etc. to follow the path
You can try forcing on the backlights circuit by disconnecting the INV_ON (BL-ON) wire going back to the main board first then use 1K resistor between BL-ON pin and standby power supply pin to force the backlights on, if the backlights are on but you do not see any video, or sound, or other functions then it has more than just the BL-ON controlling problem.
Comment