Re: 70in Vizio m70-c3 replaced led's now picture screwed up.
Cartoons looks good but other channels show it a lot more.
Cartoons looks good but other channels show it a lot more.
Attached Files
-
-
Re: 70in Vizio m70-c3 replaced led's now picture screwed up.
Out of curiosity, what would happen if I took the other side drivers off?Comment
-
Re: 70in Vizio m70-c3 replaced led's now picture screwed up.
You would have nothing but vertical bars as the panel will dots be able to gate drive the information from the source drivers anymoreDid I leave the soldering iron on?Comment
-
Re: 70in Vizio m70-c3 replaced led's now picture screwed up.
Pull the right T con ribbon. Let the left side only run. Do you see any dark areas on the left side of the panel? Also on the right side it will be white does that look dark in the center?Did I leave the soldering iron on?Comment
-
Re: 70in Vizio m70-c3 replaced led's now picture screwed up.
Makes sense lol. Just wondering. Im about to give up hope. Someone suggested earlier to disconnect the tcon board on that side but I never found out why.Comment
-
Re: 70in Vizio m70-c3 replaced led's now picture screwed up.
Doing it now. Should I pull both on the right side and just leave the 2 on the left connected?Comment
-
Re: 70in Vizio m70-c3 replaced led's now picture screwed up.
Never mind. You mean on top of the board? Thwres 2 black ones. Pull the one on the right?Comment
-
Re: 70in Vizio m70-c3 replaced led's now picture screwed up.
There was no picture. Only sound.Comment
-
Re: 70in Vizio m70-c3 replaced led's now picture screwed up.
That's what I pulled, hope it was correct.Attached FilesComment
-
-
Re: 70in Vizio m70-c3 replaced led's now picture screwed up.
you need to pull the one for the same side that the tabs were removed. If you pull the one for the other that doesn't have the side tabs removed, you will get no picture.... since no signal will be delivered to any sides. you should see half a screen with some picture and half that is white.Last edited by budwich; 02-16-2018, 06:47 PM.Comment
-
Re: 70in Vizio m70-c3 replaced led's now picture screwed up.
That's the side I pulled.Comment
-
Re: 70in Vizio m70-c3 replaced led's now picture screwed up.
??? don't understand... after you pulled the tcon to panel cable, you got NO picture?Comment
-
Re: 70in Vizio m70-c3 replaced led's now picture screwed up.
Yeah. No picture at all. Only sound.Comment
-
Re: 70in Vizio m70-c3 replaced led's now picture screwed up.
https://www.badcaps.net/forum/attach...7&d=1518637468
You pulled one of the two LVDS cables between the main board and the T-CON board, not the cables (4 white flat cables) between the LCD panel and the T-CON board, that is why you do not get the pictures.Last edited by budm; 02-16-2018, 10:45 PM.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: 70in Vizio m70-c3 replaced led's now picture screwed up.
Ok. I was wondering if I pulled the right one or not. Figured I didn't. Will pull the 2 when I get home from work. Honestly about to see if a sledge hammer will fix the problem...Comment
-
Re: 70in Vizio m70-c3 replaced led's now picture screwed up.
Ok. So here's the pic after right side tcon ribbons pulled. Is there anything else that I can try? Would love to keep the TV but its driving me crazy lol. I'm a "work on it till its fixed or till its dead type of guy". So I'll try anything.Attached FilesComment
-
-
Re: 70in Vizio m70-c3 replaced led's now picture screwed up.
Does the left side still display the dark spots with righty disconnected ?Did I leave the soldering iron on?Comment
-
Re: 70in Vizio m70-c3 replaced led's now picture screwed up.
I would look over the areas where u removed the tabs very closely (magnifying glass). U may have shorted line. otherwise your going to have to live with picComment
-
Re: 70in Vizio m70-c3 replaced led's now picture screwed up.
you never really answered the question as to whether the suction cups had "valving" for releasing air / vacuum? Also, how did you actually apply them... blaming them for this might not solve any future issue if it was "operator error", regardless of what cup system you used.Comment
-
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming... -
Hi there !
I'm having an issue for several weeks with my quite old K70 LUX RGB keyboard. I haven't used it for few months, and once I setup up again my desktop computer, I got several dead LEDs on that keyboard. I tried the Corsair troubleshooting thing (disabling options in iCUE, ...) but nothing changed so I conclude that for some reason some LEDs went in retirement...😅
Decision taken to change these LEDs as I have access to desoldering iron and binocular magnifier, I wrote a ticket to tech support, hopping to obtain the LEDs reference and... They refused to tell me 🙄...10-08-2024, 11:58 AM -
vizio e650i-a2 (LWJAOZBP Serial) led backlight flashes then turns off, has video (via flashlight) and audio.
panel: au optronics T650HVN05.4
72 led total on 12 strips, 6 led per strip wired in three groups of 24 (led driver board has three anode and three cathode pins)
link to datasheet: https://datasheetspdf.com/pdf-file/8.../T650HVN05.4/1
Vizio 56.04219.641G (liteon PA-3231-01WN-LF) Power Supply Unit
https://www.shopjimmy.com/vizio-56-0...-power-supply/
Vizio 55.75J01.001G (91.75J10.004G) Main Board... -
Failure Symptom
No picture, just red vertical stripes. Google search shows quite common problem for these recent Vizio M series although red vertical stripe pattern may differ. Some call it "Netflix" boot screen haha.
Where is the short?
Panel has 4x buffer boards. Quickly found the 1/4 panel buffer board with the problem by selectively disconnecting buffer board flex cables.
Having recently fixed another Vizio with similar symptoms that was a shorted ESD diode array ( link ) Probed the ESD diode array but... -
Bug looks like hardware so thought I posted it here. Exact same behavior on 2 different model 4K Vizio TVs running their SmartCast smarttv software. After launching youtube app, press vizio button on remote to return to the smarttv menu, once in awhile, a column of bad pixels will show for few seconds on the left hand side.
It seems the vizio software is reinitializing hardware when returning to the smarttv menu. In general, SmartCast software isn't very good. Also will randomly (relatively infrequent) get no network connection when on wifi and require reboot....
Comment