HI
All wonder if someone can help ?
I have already posted a fault on this TV lines across top of screen !! as this turned out to be a chip in the screen behind the finished trim how this happened is a mystery as there is no singe of any damage on the trim what so ever ?
Now I have ordered replacement screen and waiting for its arrival but while I am waiting for the screen I decided to re-assemble the TV for safety reasons.
But what is happening is I am not getting any display on the screen ! now I have put this back together several times as mentioned in last post I have two of these sets one is KDL-43w807C other is KDL-43w809C But both have the same T-con boards and the same motherboards and P/S boards I have tried all boards and I have even carefully cleaned contacts on all computer ribbons using a fibre glass pen.
But just cannot get the picture up the best I have had is a screen that displays black and white squares changing to red and blue bars and white screen .
Can some one tell me am I missing something here I just cannot get a picture up at all .
I have swapped T-con boards several times now but still no joy being very careful when connecting computer ribbons to make sure they are seated right am I missing something here its now driving me mad.
Any help would be much appreciated.
All wonder if someone can help ?
I have already posted a fault on this TV lines across top of screen !! as this turned out to be a chip in the screen behind the finished trim how this happened is a mystery as there is no singe of any damage on the trim what so ever ?
Now I have ordered replacement screen and waiting for its arrival but while I am waiting for the screen I decided to re-assemble the TV for safety reasons.
But what is happening is I am not getting any display on the screen ! now I have put this back together several times as mentioned in last post I have two of these sets one is KDL-43w807C other is KDL-43w809C But both have the same T-con boards and the same motherboards and P/S boards I have tried all boards and I have even carefully cleaned contacts on all computer ribbons using a fibre glass pen.
But just cannot get the picture up the best I have had is a screen that displays black and white squares changing to red and blue bars and white screen .
Can some one tell me am I missing something here I just cannot get a picture up at all .
I have swapped T-con boards several times now but still no joy being very careful when connecting computer ribbons to make sure they are seated right am I missing something here its now driving me mad.
Any help would be much appreciated.
Comment