Hi there to all!!
New to forum, first post but watching it several months silenlty.
I need your advice:
Philips 47PFL7403D/10
power supplyQ PLHC-T801A (UD)
No response while connected to wall plug.
I figured out that R5 is burnt. I have changed it with a new one and now when plugged in a relay is clicking all the time.
No led blinking.
After a minute the R5 is broke down again and everything dead.
All caps esr measured and they are very good.
Any advice for this issues?
Is it truly the problem from the PSU or maybe the mainboard?
Thanks a lot
Nodas
New to forum, first post but watching it several months silenlty.
I need your advice:
Philips 47PFL7403D/10
power supplyQ PLHC-T801A (UD)
No response while connected to wall plug.
I figured out that R5 is burnt. I have changed it with a new one and now when plugged in a relay is clicking all the time.
No led blinking.
After a minute the R5 is broke down again and everything dead.
All caps esr measured and they are very good.
Any advice for this issues?
Is it truly the problem from the PSU or maybe the mainboard?
Thanks a lot
Nodas
Comment