Eeprom dump thread!

[bman4]

Re: Eeprom dump thread!

Im wondering if anyone out there has a nand dump for ic1302 fpr a PN59d6500df00

[dani502017]

Re: Eeprom dump thread!

Im wondering if anyone out there has a nand dump for ic1302 fpr a PN59d6500df00

model tv? main?

[antas]

Re: Eeprom dump thread!

Hi, guys. I have here TV Nordmende NM40125DLED. It keeps restarting all the time. I think that reset to factory settings should resolve this problem. Any chance to reset by USB with firmware? Or to flash U10 and U12? If anyone, you guys, has a possibility to help me, please help me

Nordmende NM40125DLED
Board: 17MB82S
Panel number on the pictures (don't know which one it is)
Thank you in advance for any help.
Regards

[dani502017]

Re: Eeprom dump thread!

Hi, guys. I have here TV Nordmende NM40125DLED. It keeps restarting all the time. I think that reset to factory settings should resolve this problem. Any chance to reset by USB with firmware? Or to flash U10 and U12? If anyone, you guys, has a possibility to help me, please help me

Nordmende NM40125DLED
Board: 17MB82S
Panel number on the pictures (don't know which one it is)
Thank you in advance for any help.
Regards

try

[bman4]

Re: Eeprom dump thread!

model tv? main?

Here's the numbers
PN59d6500df00

[Farasa]

Re: Eeprom dump thread!

Evening
On the lookout for firmware pls
Tp.Vst56.pb801
Panel:T390hvn04
Or
Tp.vst59.Pb813
Panel:T390hvn04

Thanks in advance

[antas]

Re: Eeprom dump thread!

try

Thank you so much, dani502017, for your help. The TV started. All is good apart from the sound. Could be the problem related to not original software? Or the problem can be somewhere else? Thank you for any answer.

[D1964]

Re: Eeprom dump thread!

Hi,
Does anyone have the EPROM dump u6 for this set,
Panel and main board are
ST3151A05-8 BOARD MS308C1-ZC01-01
Thanks David

[ducky29]

Re: Eeprom dump thread!

Thank you so much, dani502017, for your help. The TV started. All is good apart from the sound. Could be the problem related to not original software? Or the problem can be somewhere else? Thank you for any answer.

Try another firmware

[antas]

Re: Eeprom dump thread!

Try another firmware

Where can I get it?

[dani502017]

Re: Eeprom dump thread!

Where can I get it?

check the menu settings in the service menu, see which norm is set. Did you try out the headphones if you sound?

[ducky29]

Re: Eeprom dump thread!

Where can I get it?

I can send you a firmware for your board but im not sure if its the correct screen/tuner/speaker etc etc. I can also get the correct firmware but I have to order it from my supplier.

[antas]

Re: Eeprom dump thread!

I can send you a firmware for your board but im not sure if its the correct screen/tuner/speaker etc.

Send me, please. I will try

[JoeyFitzp]

Re: Eeprom dump thread!

Hello,
Does anyone have an Eeprom dump (or Dumps) for a Vizio E390-A1? There are 2 Eeproms on this mainboard. A Winbond 25Q64FVSIG at U409 and a 24C64F at U408. I believe my problem is with the Eeprom at U409.
Mainboard# TXCCB02K038
Panel# TPT390J1

Thanks in advance! Joey

[ducky29]

Re: Eeprom dump thread!

Send me, please. I will try

I sent you the firmware

[dani502017]

Re: Eeprom dump thread!

I sent you the firmware

It is not fair not to post here the software, maybe there are others who need it. Today I will not post anymore, I will send them by email.
Merry Christmas everyone!

[ducky29]

Re: Eeprom dump thread!

It is not fair not to post here the software, maybe there are others who need it. Today I will not post anymore, I will send them by email.
Merry Christmas everyone!

Vestels firmware are very specific. I don't the screen/tuner/model/make. So I think its useless to post it here. I can post only the firmwares/dumps that im aware of their panel etc here.

[antas]

Re: Eeprom dump thread!

check the menu settings in the service menu, see which norm is set. Did you try out the headphones if you sound?

Thanks,dani502017, for your reply. Yes, I tried headphones-no sound at all. The speakers are good as well. All settings are OK. Looks like something wrong in mainboard or in the brain itself (U10 or U12 ?) ...

[antas]

Re: Eeprom dump thread!

I sent you the firmware

Thank you,ducky29. Upgrade works as should. It was upgraded but still no sound anyway ...

[dani502017]

Re: Eeprom dump thread!

Thank you,ducky29. Upgrade works as should. It was upgraded but still no sound anyway ...

try